From: Graham Moore <grmoore@opensource.altera.com>
To: Marek Vasut <marex@denx.de>
Cc: <linux-mtd@lists.infradead.org>,
David Woodhouse <dwmw2@infradead.org>,
Brian Norris <computersforpeace@gmail.com>,
<linux-kernel@vger.kernel.org>,
Alan Tull <atull@opensource.altera.com>,
Dinh Nguyen <dinguyen@opensource.altera.com>,
Yves Vandervennet <yvanderv@opensource.altera.com>,
Graham Moore <grmoore@opensource.altera.com>
Subject: [PATCH V5 1/2] mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver.
Date: Fri, 24 Jul 2015 12:17:38 -0500 [thread overview]
Message-ID: <1437758259-28299-1-git-send-email-grmoore@opensource.altera.com> (raw)
Signed-off-by: Graham Moore <grmoore@opensource.altera.com>
---
V2: Add cdns prefix to driver-specific bindings.
V3: Use existing property "is-decoded-cs" instead of creating a duplicate,
"ext-decoder". Timing parameters are in nanoseconds, not master reference
clocks. Remove bus-num completely.
---
.../devicetree/bindings/mtd/cadence_quadspi.txt | 50 ++++++++++++++++++++
1 file changed, 50 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/cadence_quadspi.txt
diff --git a/Documentation/devicetree/bindings/mtd/cadence_quadspi.txt b/Documentation/devicetree/bindings/mtd/cadence_quadspi.txt
new file mode 100644
index 0000000..1cf0d7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/cadence_quadspi.txt
@@ -0,0 +1,50 @@
+* Cadence Quad SPI controller
+
+Required properties:
+- compatible : Should be "cdns,qspi-nor".
+- reg : Contains two entries, each of which is a tuple consisting of a
+ physical address and length. The first entry is the address and
+ length of the controller register set. The second entry is the
+ address and length of the QSPI Controller data area.
+- interrupts : Unit interrupt specifier for the controller interrupt.
+- clocks : phandle to the Quad SPI clock.
+- fifo-depth : Size of the data FIFO in words.
+
+Optional properties:
+- is-decoded-cs : Flag to indicate whether decoder is used or not.
+
+Optional subnodes:
+Subnodes of the Cadence Quad SPI controller are spi slave nodes with additional
+custom properties:
+- cdns,page-size : Size, in bytes, of the device's write page
+- cdns,block-size : Size of the device's erase block
+- cdns,read-delay : Delay for read capture logic, in clock cycles
+- cdns,tshsl-ns : Delay in nanoseconds for the length that the master mode chip select outputs are de-asserted between transactions.
+- cdns,tsd2d-ns : Delay in nanoseconds between one chip select being de-activated and the activation of another.
+- cdns,tchsh-ns : Delay in nanoseconds between last bit of current transaction and deasserting the device chip select (qspi_n_ss_out).
+- cdns,tslch-ns : Delay in nanoseconds between setting qspi_n_ss_out low and first bit transfer.
+
+Example:
+
+ qspi: spi@ff705000 {
+ compatible = "cdns,qspi-nor";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xff705000 0x1000>,
+ <0xffa00000 0x1000>;
+ interrupts = <0 151 4>;
+ clocks = <&qspi_clk>;
+ is-decoded-cs = <1>;
+ fifo-depth = <128>;
+
+ flash0: n25q00@0 {
+ ...
+ cdns,page-size = <256>;
+ cdns,block-size = <16>;
+ cdns,read-delay = <4>;
+ cdns,tshsl-ns = <50>;
+ cdns,tsd2d-ns = <50>;
+ cdns,tchsh-ns = <4>;
+ cdns,tslch-ns = <4>;
+ }
+ }
--
1.7.9.5
next reply other threads:[~2015-07-24 17:22 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-24 17:17 Graham Moore [this message]
2015-07-24 17:17 ` [PATCH V5 2/2] mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller Graham Moore
2015-07-25 0:02 ` vikasm
2015-07-27 17:39 ` Graham Moore
2015-07-27 18:12 ` Vikas MANOCHA
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1437758259-28299-1-git-send-email-grmoore@opensource.altera.com \
--to=grmoore@opensource.altera.com \
--cc=atull@opensource.altera.com \
--cc=computersforpeace@gmail.com \
--cc=dinguyen@opensource.altera.com \
--cc=dwmw2@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=marex@denx.de \
--cc=yvanderv@opensource.altera.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.