From: Ondrej Zary <linux@rainbow-software.org>
To: linux-scsi@vger.kernel.org
Subject: [PATCH 18/52] atp870u: Introduce HW access wrappers
Date: Sun, 26 Jul 2015 22:24:25 +0200 [thread overview]
Message-ID: <1437942299-26674-19-git-send-email-linux@rainbow-software.org> (raw)
In-Reply-To: <1437942299-26674-1-git-send-email-linux@rainbow-software.org>
Introduce *_read? and *_write? wrappers to improve code readability.
Also make sure that baseport is always initialized, not only for ATP880.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
---
drivers/scsi/atp870u.c | 472 ++++++++++++++++++++++++++----------------------
1 file changed, 252 insertions(+), 220 deletions(-)
diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c
index fd2bb6f..07b50ac 100644
--- a/drivers/scsi/atp870u.c
+++ b/drivers/scsi/atp870u.c
@@ -44,6 +44,51 @@ static void send_s870(struct atp_unit *dev,unsigned char c);
static void is885(struct atp_unit *dev, unsigned int wkport,unsigned char c);
static void tscam_885(void);
+static inline void atp_writeb_base(struct atp_unit *atp, u8 reg, u8 val)
+{
+ outb(val, atp->baseport + reg);
+}
+
+static inline void atp_writeb_io(struct atp_unit *atp, u8 channel, u8 reg, u8 val)
+{
+ outb(val, atp->ioport[channel] + reg);
+}
+
+static inline void atp_writew_io(struct atp_unit *atp, u8 channel, u8 reg, u16 val)
+{
+ outw(val, atp->ioport[channel] + reg);
+}
+
+static inline void atp_writeb_pci(struct atp_unit *atp, u8 channel, u8 reg, u8 val)
+{
+ outb(val, atp->pciport[channel] + reg);
+}
+
+static inline void atp_writel_pci(struct atp_unit *atp, u8 channel, u8 reg, u32 val)
+{
+ outl(val, atp->pciport[channel] + reg);
+}
+
+static inline u8 atp_readb_base(struct atp_unit *atp, u8 reg)
+{
+ return inb(atp->baseport + reg);
+}
+
+static inline u8 atp_readb_io(struct atp_unit *atp, u8 channel, u8 reg)
+{
+ return inb(atp->ioport[channel] + reg);
+}
+
+static inline u16 atp_readw_io(struct atp_unit *atp, u8 channel, u8 reg)
+{
+ return inw(atp->ioport[channel] + reg);
+}
+
+static inline u8 atp_readb_pci(struct atp_unit *atp, u8 channel, u8 reg)
+{
+ return inb(atp->pciport[channel] + reg);
+}
+
static irqreturn_t atp870u_intr_handle(int irq, void *dev_id)
{
unsigned long flags;
@@ -59,7 +104,7 @@ static irqreturn_t atp870u_intr_handle(int irq, void *dev_id)
struct atp_unit *dev = (struct atp_unit *)&host->hostdata;
for (c = 0; c < 2; c++) {
- j = inb(dev->ioport[c] + 0x1f);
+ j = atp_readb_io(dev, c, 0x1f);
if ((j & 0x80) != 0)
break;
dev->in_int[c] = 0;
@@ -70,29 +115,29 @@ static irqreturn_t atp870u_intr_handle(int irq, void *dev_id)
printk("atp870u_intr_handle enter\n");
#endif
dev->in_int[c] = 1;
- cmdp = inb(dev->ioport[c] + 0x10);
+ cmdp = atp_readb_io(dev, c, 0x10);
if (dev->working[c] != 0) {
if (dev->dev_id == ATP885_DEVID) {
- if ((inb(dev->ioport[c] + 0x16) & 0x80) == 0)
- outb((inb(dev->ioport[c] + 0x16) | 0x80), dev->ioport[c] + 0x16);
+ if ((atp_readb_io(dev, c, 0x16) & 0x80) == 0)
+ atp_writeb_io(dev, c, 0x16, (atp_readb_io(dev, c, 0x16) | 0x80));
}
- if ((inb(dev->pciport[c]) & 0x08) != 0)
+ if ((atp_readb_pci(dev, c, 0x00) & 0x08) != 0)
{
for (k=0; k < 1000; k++) {
- if ((inb(dev->pciport[c] + 2) & 0x08) == 0)
+ if ((atp_readb_pci(dev, c, 2) & 0x08) == 0)
break;
- if ((inb(dev->pciport[c] + 2) & 0x01) == 0)
+ if ((atp_readb_pci(dev, c, 2) & 0x01) == 0)
break;
}
}
- outb(0x00, dev->pciport[c]);
+ atp_writeb_pci(dev, c, 0, 0x00);
- i = inb(dev->ioport[c] + 0x17);
+ i = atp_readb_io(dev, c, 0x17);
if (dev->dev_id == ATP885_DEVID)
- outb(0x06, dev->pciport[c] + 2);
+ atp_writeb_pci(dev, c, 2, 0x06);
- target_id = inb(dev->ioport[c] + 0x15);
+ target_id = atp_readb_io(dev, c, 0x15);
/*
* Remap wide devices onto id numbers
@@ -121,9 +166,9 @@ static irqreturn_t atp870u_intr_handle(int irq, void *dev_id)
}
if (dev->dev_id == ATP885_DEVID) {
adrcnt = 0;
- ((unsigned char *) &adrcnt)[2] = inb(dev->ioport[c] + 0x12);
- ((unsigned char *) &adrcnt)[1] = inb(dev->ioport[c] + 0x13);
- ((unsigned char *) &adrcnt)[0] = inb(dev->ioport[c] + 0x14);
+ ((unsigned char *) &adrcnt)[2] = atp_readb_io(dev, c, 0x12);
+ ((unsigned char *) &adrcnt)[1] = atp_readb_io(dev, c, 0x13);
+ ((unsigned char *) &adrcnt)[0] = atp_readb_io(dev, c, 0x14);
if (dev->id[c][target_id].last_len != adrcnt)
{
k = dev->id[c][target_id].last_len;
@@ -140,10 +185,9 @@ static irqreturn_t atp870u_intr_handle(int irq, void *dev_id)
* Flip wide
*/
if (dev->wide_id[c] != 0) {
- outb(0x01, dev->ioport[c] + 0x1b);
- while ((inb(dev->ioport[c] + 0x1b) & 0x01) != 0x01) {
- outb(0x01, dev->ioport[c] + 0x1b);
- }
+ atp_writeb_io(dev, c, 0x1b, 0x01);
+ while ((atp_readb_io(dev, c, 0x1b) & 0x01) != 0x01)
+ atp_writeb_io(dev, c, 0x1b, 0x01);
}
/*
* Issue more commands
@@ -178,15 +222,15 @@ static irqreturn_t atp870u_intr_handle(int irq, void *dev_id)
dev->last_cmd[c] = 0xff;
}
adrcnt = 0;
- ((unsigned char *) &adrcnt)[2] = inb(dev->ioport[c] + 0x12);
- ((unsigned char *) &adrcnt)[1] = inb(dev->ioport[c] + 0x13);
- ((unsigned char *) &adrcnt)[0] = inb(dev->ioport[c] + 0x14);
+ ((unsigned char *) &adrcnt)[2] = atp_readb_io(dev, c, 0x12);
+ ((unsigned char *) &adrcnt)[1] = atp_readb_io(dev, c, 0x13);
+ ((unsigned char *) &adrcnt)[0] = atp_readb_io(dev, c, 0x14);
k = dev->id[c][target_id].last_len;
k -= adrcnt;
dev->id[c][target_id].tran_len = k;
dev->id[c][target_id].last_len = adrcnt;
- outb(0x41, dev->ioport[c] + 0x10);
- outb(0x08, dev->ioport[c] + 0x18);
+ atp_writeb_io(dev, c, 0x10, 0x41);
+ atp_writeb_io(dev, c, 0x18, 0x08);
dev->in_int[c] = 0;
return IRQ_HANDLED;
}
@@ -205,9 +249,9 @@ static irqreturn_t atp870u_intr_handle(int irq, void *dev_id)
printk(KERN_DEBUG "Device reselect\n");
#endif
lun = 0;
- if (cmdp == 0x44 || i==0x80) {
- lun = inb(dev->ioport[c] + 0x1d) & 0x07;
- } else {
+ if (cmdp == 0x44 || i == 0x80)
+ lun = atp_readb_io(dev, c, 0x1d) & 0x07;
+ else {
if ((dev->last_cmd[c] & 0xf0) != 0x40) {
dev->last_cmd[c] = 0xff;
}
@@ -216,26 +260,26 @@ static irqreturn_t atp870u_intr_handle(int irq, void *dev_id)
printk("cmdp = 0x41\n");
#endif
adrcnt = 0;
- ((unsigned char *) &adrcnt)[2] = inb(dev->ioport[c] + 0x12);
- ((unsigned char *) &adrcnt)[1] = inb(dev->ioport[c] + 0x13);
- ((unsigned char *) &adrcnt)[0] = inb(dev->ioport[c] + 0x14);
+ ((unsigned char *) &adrcnt)[2] = atp_readb_io(dev, c, 0x12);
+ ((unsigned char *) &adrcnt)[1] = atp_readb_io(dev, c, 0x13);
+ ((unsigned char *) &adrcnt)[0] = atp_readb_io(dev, c, 0x14);
k = dev->id[c][target_id].last_len;
k -= adrcnt;
dev->id[c][target_id].tran_len = k;
dev->id[c][target_id].last_len = adrcnt;
- outb(0x08, dev->ioport[c] + 0x18);
+ atp_writeb_io(dev, c, 0x18, 0x08);
dev->in_int[c] = 0;
return IRQ_HANDLED;
} else {
#ifdef ED_DBGP
printk("cmdp != 0x41\n");
#endif
- outb(0x46, dev->ioport[c] + 0x10);
+ atp_writeb_io(dev, c, 0x10, 0x46);
dev->id[c][target_id].dirct = 0x00;
- outb(0x00, dev->ioport[c] + 0x12);
- outb(0x00, dev->ioport[c] + 0x13);
- outb(0x00, dev->ioport[c] + 0x14);
- outb(0x08, dev->ioport[c] + 0x18);
+ atp_writeb_io(dev, c, 0x12, 0x00);
+ atp_writeb_io(dev, c, 0x13, 0x00);
+ atp_writeb_io(dev, c, 0x14, 0x00);
+ atp_writeb_io(dev, c, 0x18, 0x08);
dev->in_int[c] = 0;
return IRQ_HANDLED;
}
@@ -244,12 +288,12 @@ static irqreturn_t atp870u_intr_handle(int irq, void *dev_id)
dev->last_cmd[c] |= 0x40;
}
if (dev->dev_id == ATP885_DEVID) {
- j = inb(dev->baseport + 0x29) & 0xfe;
- outb(j, dev->baseport + 0x29);
+ j = atp_readb_base(dev, 0x29) & 0xfe;
+ atp_writeb_base(dev, 0x29, j);
} else
- outb(0x45, dev->ioport[c] + 0x10);
+ atp_writeb_io(dev, c, 0x10, 0x45);
- target_id = inb(dev->ioport[c] + 0x16);
+ target_id = atp_readb_io(dev, c, 0x16);
/*
* Remap wide identifiers
*/
@@ -259,7 +303,7 @@ static irqreturn_t atp870u_intr_handle(int irq, void *dev_id)
target_id &= 0x07;
}
if (dev->dev_id == ATP885_DEVID)
- outb(0x45, dev->ioport[c] + 0x10);
+ atp_writeb_io(dev, c, 0x10, 0x45);
workreq = dev->id[c][target_id].curr_req;
#ifdef ED_DBGP
scmd_printk(KERN_DEBUG, workreq, "CDB");
@@ -268,16 +312,16 @@ static irqreturn_t atp870u_intr_handle(int irq, void *dev_id)
printk("\n");
#endif
- outb(lun, dev->ioport[c] + 0x0f);
- outb(dev->id[c][target_id].devsp, dev->ioport[c] + 0x11);
+ atp_writeb_io(dev, c, 0x0f, lun);
+ atp_writeb_io(dev, c, 0x11, dev->id[c][target_id].devsp);
adrcnt = dev->id[c][target_id].tran_len;
k = dev->id[c][target_id].last_len;
- outb(((unsigned char *) &k)[2], dev->ioport[c] + 0x12);
- outb(((unsigned char *) &k)[1], dev->ioport[c] + 0x13);
- outb(((unsigned char *) &k)[0], dev->ioport[c] + 0x14);
+ atp_writeb_io(dev, c, 0x12, ((unsigned char *) &k)[2]);
+ atp_writeb_io(dev, c, 0x13, ((unsigned char *) &k)[1]);
+ atp_writeb_io(dev, c, 0x14, ((unsigned char *) &k)[0]);
#ifdef ED_DBGP
- printk("k %x, k[0] 0x%x k[1] 0x%x k[2] 0x%x\n", k, inb(dev->ioport[c] + 0x14), inb(dev->ioport[c] + 0x13), inb(dev->ioport[c] + 0x12));
+ printk("k %x, k[0] 0x%x k[1] 0x%x k[2] 0x%x\n", k, atp_readb_io(dev, c, 0x14), atp_readb_io(dev, c, 0x13), atp_readb_io(dev, c, 0x12));
#endif
/* Remap wide */
j = target_id;
@@ -286,30 +330,28 @@ static irqreturn_t atp870u_intr_handle(int irq, void *dev_id)
}
/* Add direction */
j |= dev->id[c][target_id].dirct;
- outb(j, dev->ioport[c] + 0x15);
- outb(0x80, dev->ioport[c] + 0x16);
+ atp_writeb_io(dev, c, 0x15, j);
+ atp_writeb_io(dev, c, 0x16, 0x80);
/* enable 32 bit fifo transfer */
if (dev->dev_id == ATP885_DEVID) {
- i=inb(dev->pciport[c] + 1) & 0xf3;
+ i = atp_readb_pci(dev, c, 1) & 0xf3;
//j=workreq->cmnd[0];
if ((workreq->cmnd[0] == 0x08) || (workreq->cmnd[0] == 0x28) || (workreq->cmnd[0] == 0x0a) || (workreq->cmnd[0] == 0x2a)) {
i |= 0x0c;
}
- outb(i, dev->pciport[c] + 1);
+ atp_writeb_pci(dev, c, 1, i);
} else if ((dev->dev_id == ATP880_DEVID1) ||
(dev->dev_id == ATP880_DEVID2) ) {
- if ((workreq->cmnd[0] == 0x08) || (workreq->cmnd[0] == 0x28) || (workreq->cmnd[0] == 0x0a) || (workreq->cmnd[0] == 0x2a)) {
- outb((unsigned char) ((inb(dev->ioport[c] - 0x05) & 0x3f) | 0xc0), dev->ioport[c] - 0x05);///minus 0x05???
- } else {
- outb((unsigned char) (inb(dev->ioport[c] - 0x05) & 0x3f), dev->ioport[c] - 0x05);///minus 0x05???
- }
+ if ((workreq->cmnd[0] == 0x08) || (workreq->cmnd[0] == 0x28) || (workreq->cmnd[0] == 0x0a) || (workreq->cmnd[0] == 0x2a))
+ atp_writeb_base(dev, 0x3b, (atp_readb_base(dev, 0x3b) & 0x3f) | 0xc0);
+ else
+ atp_writeb_base(dev, 0x3b, atp_readb_base(dev, 0x3b) & 0x3f);
} else {
- if ((workreq->cmnd[0] == 0x08) || (workreq->cmnd[0] == 0x28) || (workreq->cmnd[0] == 0x0a) || (workreq->cmnd[0] == 0x2a)) {
- outb((unsigned char) ((inb(dev->ioport[c] + 0x3a) & 0xf3) | 0x08), dev->ioport[c] + 0x3a);
- } else {
- outb((unsigned char) (inb(dev->ioport[c] + 0x3a) & 0xf3), dev->ioport[c] + 0x3a);
- }
+ if ((workreq->cmnd[0] == 0x08) || (workreq->cmnd[0] == 0x28) || (workreq->cmnd[0] == 0x0a) || (workreq->cmnd[0] == 0x2a))
+ atp_writeb_io(dev, c, 0x3a, (atp_readb_io(dev, c, 0x3a) & 0xf3) | 0x08);
+ else
+ atp_writeb_io(dev, c, 0x3a, atp_readb_io(dev, c, 0x3a) & 0xf3);
}
j = 0;
id = 1;
@@ -320,12 +362,11 @@ static irqreturn_t atp870u_intr_handle(int irq, void *dev_id)
if ((id & dev->wide_id[c]) != 0) {
j |= 0x01;
}
- outb(j, dev->ioport[c] + 0x1b);
- while ((inb(dev->ioport[c] + 0x1b) & 0x01) != j) {
- outb(j,dev->ioport[c] + 0x1b);
- }
+ atp_writeb_io(dev, c, 0x1b, j);
+ while ((atp_readb_io(dev, c, 0x1b) & 0x01) != j)
+ atp_writeb_io(dev, c, 0x1b, j);
if (dev->id[c][target_id].last_len == 0) {
- outb(0x08, dev->ioport[c] + 0x18);
+ atp_writeb_io(dev, c, 0x18, 0x08);
dev->in_int[c] = 0;
#ifdef ED_DBGP
printk("dev->id[c][target_id].last_len = 0\n");
@@ -358,28 +399,28 @@ static irqreturn_t atp870u_intr_handle(int irq, void *dev_id)
}
}
}
- outl(dev->id[c][target_id].prdaddr, dev->pciport[c] + 0x04);
+ atp_writel_pci(dev, c, 0x04, dev->id[c][target_id].prdaddr);
#ifdef ED_DBGP
printk("dev->id[%d][%d].prdaddr 0x%8x\n", c, target_id, dev->id[c][target_id].prdaddr);
#endif
if (dev->dev_id != ATP885_DEVID) {
- outb(0x06, dev->pciport[c] + 2);
- outb(0x00, dev->pciport[c] + 2);
+ atp_writeb_pci(dev, c, 2, 0x06);
+ atp_writeb_pci(dev, c, 2, 0x00);
}
/*
* Check transfer direction
*/
if (dev->id[c][target_id].dirct != 0) {
- outb(0x08, dev->ioport[c] + 0x18);
- outb(0x01, dev->pciport[c]);
+ atp_writeb_io(dev, c, 0x18, 0x08);
+ atp_writeb_pci(dev, c, 0, 0x01);
dev->in_int[c] = 0;
#ifdef ED_DBGP
printk("status 0x80 return dirct != 0\n");
#endif
return IRQ_HANDLED;
}
- outb(0x08, dev->ioport[c] + 0x18);
- outb(0x09, dev->pciport[c]);
+ atp_writeb_io(dev, c, 0x18, 0x08);
+ atp_writeb_pci(dev, c, 0, 0x09);
dev->in_int[c] = 0;
#ifdef ED_DBGP
printk("status 0x80 return dirct = 0\n");
@@ -398,7 +439,7 @@ static irqreturn_t atp870u_intr_handle(int irq, void *dev_id)
dev->last_cmd[c] = 0xff;
}
if (i == 0x16) {
- workreq->result = inb(dev->ioport[c] + 0x0f);
+ workreq->result = atp_readb_io(dev, c, 0x0f);
if (((dev->r1f[c][target_id] & 0x10) != 0)&&(dev->dev_id==ATP885_DEVID)) {
printk(KERN_WARNING "AEC67162 CRC ERROR !\n");
workreq->result = 0x02;
@@ -407,8 +448,8 @@ static irqreturn_t atp870u_intr_handle(int irq, void *dev_id)
workreq->result = 0x02;
if (dev->dev_id == ATP885_DEVID) {
- j = inb(dev->baseport + 0x29) | 0x01;
- outb(j, dev->baseport + 0x29);
+ j = atp_readb_base(dev, 0x29) | 0x01;
+ atp_writeb_base(dev, 0x29, j);
}
/*
* Complete the command
@@ -430,10 +471,9 @@ static irqreturn_t atp870u_intr_handle(int irq, void *dev_id)
* Take it back wide
*/
if (dev->wide_id[c] != 0) {
- outb(0x01, dev->ioport[c] + 0x1b);
- while ((inb(dev->ioport[c] + 0x1b) & 0x01) != 0x01) {
- outb(0x01, dev->ioport[c] + 0x1b);
- }
+ atp_writeb_io(dev, c, 0x1b, 0x01);
+ while ((atp_readb_io(dev, c, 0x1b) & 0x01) != 0x01)
+ atp_writeb_io(dev, c, 0x1b, 0x01);
}
/*
* If there is stuff to send and nothing going then send it
@@ -458,52 +498,51 @@ static irqreturn_t atp870u_intr_handle(int irq, void *dev_id)
}
i &= 0x0f;
if (i == 0x09) {
- outl(dev->id[c][target_id].prdaddr, dev->pciport[c] + 4);
- outb(0x06, dev->pciport[c] + 2);
- outb(0x00, dev->pciport[c] + 2);
- outb(0x41, dev->ioport[c] + 0x10);
+ atp_writel_pci(dev, c, 4, dev->id[c][target_id].prdaddr);
+ atp_writeb_pci(dev, c, 2, 0x06);
+ atp_writeb_pci(dev, c, 2, 0x00);
+ atp_writeb_io(dev, c, 0x10, 0x41);
if (dev->dev_id == ATP885_DEVID) {
k = dev->id[c][target_id].last_len;
- outb((unsigned char) (((unsigned char *) (&k))[2]), dev->ioport[c] + 0x12);
- outb((unsigned char) (((unsigned char *) (&k))[1]), dev->ioport[c] + 0x13);
- outb((unsigned char) (((unsigned char *) (&k))[0]), dev->ioport[c] + 0x14);
+ atp_writeb_io(dev, c, 0x12, ((unsigned char *) (&k))[2]);
+ atp_writeb_io(dev, c, 0x13, ((unsigned char *) (&k))[1]);
+ atp_writeb_io(dev, c, 0x14, ((unsigned char *) (&k))[0]);
dev->id[c][target_id].dirct = 0x00;
} else {
dev->id[c][target_id].dirct = 0x00;
}
- outb(0x08, dev->ioport[c] + 0x18);
- outb(0x09, dev->pciport[c]);
+ atp_writeb_io(dev, c, 0x18, 0x08);
+ atp_writeb_pci(dev, c, 0, 0x09);
dev->in_int[c] = 0;
return IRQ_HANDLED;
}
if (i == 0x08) {
- outl(dev->id[c][target_id].prdaddr, dev->pciport[c] + 4);
- outb(0x06, dev->pciport[c] + 2);
- outb(0x00, dev->pciport[c] + 2);
- outb(0x41, dev->ioport[c] + 0x10);
+ atp_writel_pci(dev, c, 4, dev->id[c][target_id].prdaddr);
+ atp_writeb_pci(dev, c, 2, 0x06);
+ atp_writeb_pci(dev, c, 2, 0x00);
+ atp_writeb_io(dev, c, 0x10, 0x41);
if (dev->dev_id == ATP885_DEVID) {
k = dev->id[c][target_id].last_len;
- outb((unsigned char) (((unsigned char *) (&k))[2]), dev->ioport[c] + 0x12);
- outb((unsigned char) (((unsigned char *) (&k))[1]), dev->ioport[c] + 0x13);
- outb((unsigned char) (((unsigned char *) (&k))[0]), dev->ioport[c] + 0x14);
+ atp_writeb_io(dev, c, 0x12, ((unsigned char *) (&k))[2]);
+ atp_writeb_io(dev, c, 0x13, ((unsigned char *) (&k))[1]);
+ atp_writeb_io(dev, c, 0x14, ((unsigned char *) (&k))[0]);
}
- outb((unsigned char) (inb(dev->ioport[c] + 0x15) | 0x20), dev->ioport[c] + 0x15);
+ atp_writeb_io(dev, c, 0x15, atp_readb_io(dev, c, 0x15) | 0x20);
dev->id[c][target_id].dirct = 0x20;
- outb(0x08, dev->ioport[c] + 0x18);
- outb(0x01, dev->pciport[c]);
+ atp_writeb_io(dev, c, 0x18, 0x08);
+ atp_writeb_pci(dev, c, 0, 0x01);
dev->in_int[c] = 0;
return IRQ_HANDLED;
}
- if (i == 0x0a) {
- outb(0x30, dev->ioport[c] + 0x10);
- } else {
- outb(0x46, dev->ioport[c] + 0x10);
- }
+ if (i == 0x0a)
+ atp_writeb_io(dev, c, 0x10, 0x30);
+ else
+ atp_writeb_io(dev, c, 0x10, 0x46);
dev->id[c][target_id].dirct = 0x00;
- outb(0x00, dev->ioport[c] + 0x12);
- outb(0x00, dev->ioport[c] + 0x13);
- outb(0x00, dev->ioport[c] + 0x14);
- outb(0x08, dev->ioport[c] + 0x18);
+ atp_writeb_io(dev, c, 0x12, 0x00);
+ atp_writeb_io(dev, c, 0x13, 0x00);
+ atp_writeb_io(dev, c, 0x14, 0x00);
+ atp_writeb_io(dev, c, 0x18, 0x08);
}
dev->in_int[c] = 0;
@@ -590,9 +629,9 @@ static int atp870u_queuecommand_lck(struct scsi_cmnd *req_p,
}
dev->quereq[c][dev->quend[c]] = req_p;
#ifdef ED_DBGP
- printk("dev->ioport[c] = %x inb(dev->ioport[c] + 0x1c) = %x dev->in_int[%d] = %d dev->in_snd[%d] = %d\n",dev->ioport[c],inb(dev->ioport[c] + 0x1c),c,dev->in_int[c],c,dev->in_snd[c]);
+ printk("dev->ioport[c] = %x atp_readb_io(dev, c, 0x1c) = %x dev->in_int[%d] = %d dev->in_snd[%d] = %d\n",dev->ioport[c],atp_readb_io(dev, c, 0x1c),c,dev->in_int[c],c,dev->in_snd[c]);
#endif
- if ((inb(dev->ioport[c] + 0x1c) == 0) && (dev->in_int[c] == 0) && (dev->in_snd[c] == 0)) {
+ if ((atp_readb_io(dev, c, 0x1c) == 0) && (dev->in_int[c] == 0) && (dev->in_snd[c] == 0)) {
#ifdef ED_DBGP
printk("Call sent_s870(atp870u_queuecommand)\n");
#endif
@@ -666,7 +705,7 @@ static void send_s870(struct atp_unit *dev,unsigned char c)
dev->id[c][scmd_id(workreq)].curr_req = workreq;
dev->last_cmd[c] = scmd_id(workreq);
}
- if ((inb(dev->ioport[c] + 0x1f) & 0xb0) != 0 || inb(dev->ioport[c] + 0x1c) != 0) {
+ if ((atp_readb_io(dev, c, 0x1f) & 0xb0) != 0 || atp_readb_io(dev, c, 0x1c) != 0) {
#ifdef ED_DBGP
printk("Abort to Send\n");
#endif
@@ -685,8 +724,8 @@ static void send_s870(struct atp_unit *dev,unsigned char c)
l = scsi_bufflen(workreq);
if (dev->dev_id == ATP885_DEVID) {
- j = inb(dev->baseport + 0x29) & 0xfe;
- outb(j, dev->baseport + 0x29);
+ j = atp_readb_base(dev, 0x29) & 0xfe;
+ atp_writeb_base(dev, 0x29, j);
dev->r1f[c][scmd_id(workreq)] = 0;
}
@@ -709,9 +748,9 @@ static void send_s870(struct atp_unit *dev,unsigned char c)
if ((w & dev->wide_id[c]) != 0) {
j |= 0x01;
}
- outb(j, dev->ioport[c] + 0x1b);
- while ((inb(dev->ioport[c] + 0x1b) & 0x01) != j) {
- outb(j,dev->ioport[c] + 0x1b);
+ atp_writeb_io(dev, c, 0x1b, j);
+ while ((atp_readb_io(dev, c, 0x1b) & 0x01) != j) {
+ atp_writeb_pci(dev, c, 0x1b, j);
#ifdef ED_DBGP
printk("send_s870 while loop 1\n");
#endif
@@ -720,21 +759,19 @@ static void send_s870(struct atp_unit *dev,unsigned char c)
* Write the command
*/
- outb(workreq->cmd_len, dev->ioport[c] + 0x00);
- outb(0x2c, dev->ioport[c] + 0x01);
- if (dev->dev_id == ATP885_DEVID) {
- outb(0x7f, dev->ioport[c] + 0x02);
- } else {
- outb(0xcf, dev->ioport[c] + 0x02);
- }
- for (i = 0; i < workreq->cmd_len; i++) {
- outb(workreq->cmnd[i], dev->ioport[c] + 0x03 + i);
- }
- outb(workreq->device->lun, dev->ioport[c] + 0x0f);
+ atp_writeb_io(dev, c, 0x00, workreq->cmd_len);
+ atp_writeb_io(dev, c, 0x01, 0x2c);
+ if (dev->dev_id == ATP885_DEVID)
+ atp_writeb_io(dev, c, 0x02, 0x7f);
+ else
+ atp_writeb_io(dev, c, 0x02, 0xcf);
+ for (i = 0; i < workreq->cmd_len; i++)
+ atp_writeb_io(dev, c, 0x03 + i, workreq->cmnd[i]);
+ atp_writeb_io(dev, c, 0x0f, workreq->device->lun);
/*
* Write the target
*/
- outb(dev->id[c][target_id].devsp, dev->ioport[c] + 0x11);
+ atp_writeb_io(dev, c, 0x11, dev->id[c][target_id].devsp);
#ifdef ED_DBGP
printk("dev->id[%d][%d].devsp = %2x\n",c,target_id,dev->id[c][target_id].devsp);
#endif
@@ -743,9 +780,9 @@ static void send_s870(struct atp_unit *dev,unsigned char c)
/*
* Write transfer size
*/
- outb((unsigned char) (((unsigned char *) (&l))[2]), dev->ioport[c] + 0x12);
- outb((unsigned char) (((unsigned char *) (&l))[1]), dev->ioport[c] + 0x13);
- outb((unsigned char) (((unsigned char *) (&l))[0]), dev->ioport[c] + 0x14);
+ atp_writeb_io(dev, c, 0x12, ((unsigned char *) (&l))[2]);
+ atp_writeb_io(dev, c, 0x13, ((unsigned char *) (&l))[1]);
+ atp_writeb_io(dev, c, 0x14, ((unsigned char *) (&l))[0]);
j = target_id;
dev->id[c][j].last_len = l;
dev->id[c][j].tran_len = 0;
@@ -761,23 +798,21 @@ static void send_s870(struct atp_unit *dev,unsigned char c)
/*
* Check transfer direction
*/
- if (workreq->sc_data_direction == DMA_TO_DEVICE) {
- outb((unsigned char) (j | 0x20), dev->ioport[c] + 0x15);
- } else {
- outb(j, dev->ioport[c] + 0x15);
- }
- outb((unsigned char) (inb(dev->ioport[c] + 0x16) | 0x80), dev->ioport[c] + 0x16);
- outb(0x80, dev->ioport[c] + 0x16);
+ if (workreq->sc_data_direction == DMA_TO_DEVICE)
+ atp_writeb_io(dev, c, 0x15, j | 0x20);
+ else
+ atp_writeb_io(dev, c, 0x15, j);
+ atp_writeb_io(dev, c, 0x16, atp_readb_io(dev, c, 0x16) | 0x80);
+ atp_writeb_io(dev, c, 0x16, 0x80);
dev->id[c][target_id].dirct = 0;
if (l == 0) {
- if (inb(dev->ioport[c] + 0x1c) == 0) {
+ if (atp_readb_io(dev, c, 0x1c) == 0) {
#ifdef ED_DBGP
printk("change SCSI_CMD_REG 0x08\n");
#endif
- outb(0x08, dev->ioport[c] + 0x18);
- } else {
+ atp_writeb_io(dev, c, 0x18, 0x08);
+ } else
dev->last_cmd[c] |= 0x40;
- }
dev->in_snd[c] = 0;
return;
}
@@ -821,36 +856,34 @@ static void send_s870(struct atp_unit *dev,unsigned char c)
printk("send_s870: prdaddr_2 0x%8x target_id %d\n", dev->id[c][target_id].prdaddr,target_id);
#endif
dev->id[c][target_id].prdaddr = dev->id[c][target_id].prd_bus;
- outl(dev->id[c][target_id].prdaddr, dev->pciport[c] + 4);
- outb(0x06, dev->pciport[c] + 2);
- outb(0x00, dev->pciport[c] + 2);
+ atp_writel_pci(dev, c, 4, dev->id[c][target_id].prdaddr);
+ atp_writeb_pci(dev, c, 2, 0x06);
+ atp_writeb_pci(dev, c, 2, 0x00);
if (dev->dev_id == ATP885_DEVID) {
- j = inb(dev->pciport[c] + 1) & 0xf3;
+ j = atp_readb_pci(dev, c, 1) & 0xf3;
if ((workreq->cmnd[0] == 0x08) || (workreq->cmnd[0] == 0x28) ||
(workreq->cmnd[0] == 0x0a) || (workreq->cmnd[0] == 0x2a)) {
j |= 0x0c;
}
- outb(j, dev->pciport[c] + 1);
+ atp_writeb_pci(dev, c, 1, j);
} else if ((dev->dev_id == ATP880_DEVID1) ||
(dev->dev_id == ATP880_DEVID2)) {
- if ((workreq->cmnd[0] == 0x08) || (workreq->cmnd[0] == 0x28) || (workreq->cmnd[0] == 0x0a) || (workreq->cmnd[0] == 0x2a)) {
- outb((unsigned char) ((inb(dev->ioport[c] - 0x05) & 0x3f) | 0xc0), dev->ioport[c] - 0x05);
- } else {
- outb((unsigned char) (inb(dev->ioport[c] - 0x05) & 0x3f), dev->ioport[c] - 0x05);
- }
+ if ((workreq->cmnd[0] == 0x08) || (workreq->cmnd[0] == 0x28) || (workreq->cmnd[0] == 0x0a) || (workreq->cmnd[0] == 0x2a))
+ atp_writeb_base(dev, 0x3b, (atp_readb_base(dev, 0x3b) & 0x3f) | 0xc0);
+ else
+ atp_writeb_base(dev, 0x3b, atp_readb_base(dev, 0x3b) & 0x3f);
} else {
- if ((workreq->cmnd[0] == 0x08) || (workreq->cmnd[0] == 0x28) || (workreq->cmnd[0] == 0x0a) || (workreq->cmnd[0] == 0x2a)) {
- outb((inb(dev->ioport[c] + 0x3a) & 0xf3) | 0x08, dev->ioport[c] + 0x3a);
- } else {
- outb(inb(dev->ioport[c] + 0x3a) & 0xf3, dev->ioport[c] + 0x3a);
- }
+ if ((workreq->cmnd[0] == 0x08) || (workreq->cmnd[0] == 0x28) || (workreq->cmnd[0] == 0x0a) || (workreq->cmnd[0] == 0x2a))
+ atp_writeb_io(dev, c, 0x3a, (atp_readb_io(dev, c, 0x3a) & 0xf3) | 0x08);
+ else
+ atp_writeb_io(dev, c, 0x3a, atp_readb_io(dev, c, 0x3a) & 0xf3);
}
if(workreq->sc_data_direction == DMA_TO_DEVICE) {
dev->id[c][target_id].dirct = 0x20;
- if (inb(dev->ioport[c] + 0x1c) == 0) {
- outb(0x08, dev->ioport[c] + 0x18);
- outb(0x01, dev->pciport[c]);
+ if (atp_readb_io(dev, c, 0x1c) == 0) {
+ atp_writeb_io(dev, c, 0x18, 0x08);
+ atp_writeb_pci(dev, c, 0, 0x01);
#ifdef ED_DBGP
printk( "start DMA(to target)\n");
#endif
@@ -860,9 +893,9 @@ static void send_s870(struct atp_unit *dev,unsigned char c)
dev->in_snd[c] = 0;
return;
}
- if (inb(dev->ioport[c] + 0x1c) == 0) {
- outb(0x08, dev->ioport[c] + 0x18);
- outb(0x09, dev->pciport[c]);
+ if (atp_readb_io(dev, c, 0x1c) == 0) {
+ atp_writeb_io(dev, c, 0x18, 0x08);
+ atp_writeb_pci(dev, c, 0, 0x09);
#ifdef ED_DBGP
printk( "start DMA(to host)\n");
#endif
@@ -879,28 +912,28 @@ static unsigned char fun_scam(struct atp_unit *dev, unsigned short int *val)
unsigned short int i, k;
unsigned char j;
- outw(*val, dev->ioport[0] + 0x1c);
+ atp_writew_io(dev, 0, 0x1c, *val);
for (i = 0; i < 10; i++) { /* stable >= bus settle delay(400 ns) */
- k = inw(dev->ioport[0] + 0x1c);
+ k = atp_readw_io(dev, 0, 0x1c);
j = (unsigned char) (k >> 8);
if ((k & 0x8000) != 0) /* DB7 all release? */
i = 0;
}
*val |= 0x4000; /* assert DB6 */
- outw(*val, dev->ioport[0] + 0x1c);
+ atp_writew_io(dev, 0, 0x1c, *val);
*val &= 0xdfff; /* assert DB5 */
- outw(*val, dev->ioport[0] + 0x1c);
+ atp_writew_io(dev, 0, 0x1c, *val);
for (i = 0; i < 10; i++) { /* stable >= bus settle delay(400 ns) */
- if ((inw(dev->ioport[0] + 0x1c) & 0x2000) != 0) /* DB5 all release? */
+ if ((atp_readw_io(dev, 0, 0x1c) & 0x2000) != 0) /* DB5 all release? */
i = 0;
}
*val |= 0x8000; /* no DB4-0, assert DB7 */
*val &= 0xe0ff;
- outw(*val, dev->ioport[0] + 0x1c);
+ atp_writew_io(dev, 0, 0x1c, *val);
*val &= 0xbfff; /* release DB6 */
- outw(*val, dev->ioport[0] + 0x1c);
+ atp_writew_io(dev, 0, 0x1c, *val);
for (i = 0; i < 10; i++) { /* stable >= bus settle delay(400 ns) */
- if ((inw(dev->ioport[0] + 0x1c) & 0x4000) != 0) /* DB6 all release? */
+ if ((atp_readw_io(dev, 0, 0x1c) & 0x4000) != 0) /* DB6 all release? */
i = 0;
}
@@ -926,9 +959,9 @@ static void tscam(struct Scsi_Host *host)
}
*/
- outb(0x08, dev->ioport[0] + 1);
- outb(0x7f, dev->ioport[0] + 2);
- outb(0x20, dev->ioport[0] + 0x11);
+ atp_writeb_io(dev, 0, 1, 0x08);
+ atp_writeb_io(dev, 0, 2, 0x7f);
+ atp_writeb_io(dev, 0, 0x11, 0x20);
if ((dev->scam_on & 0x40) == 0) {
return;
@@ -941,13 +974,13 @@ static void tscam(struct Scsi_Host *host)
j = 8;
}
assignid_map = m;
- outb(0x02, dev->ioport[0] + 0x02); /* 2*2=4ms,3EH 2/32*3E=3.9ms */
- outb(0, dev->ioport[0] + 0x03);
- outb(0, dev->ioport[0] + 0x04);
- outb(0, dev->ioport[0] + 0x05);
- outb(0, dev->ioport[0] + 0x06);
- outb(0, dev->ioport[0] + 0x07);
- outb(0, dev->ioport[0] + 0x08);
+ atp_writeb_io(dev, 0, 0x02, 0x02); /* 2*2=4ms,3EH 2/32*3E=3.9ms */
+ atp_writeb_io(dev, 0, 0x03, 0);
+ atp_writeb_io(dev, 0, 0x04, 0);
+ atp_writeb_io(dev, 0, 0x05, 0);
+ atp_writeb_io(dev, 0, 0x06, 0);
+ atp_writeb_io(dev, 0, 0x07, 0);
+ atp_writeb_io(dev, 0, 0x08, 0);
for (i = 0; i < j; i++) {
m = 1;
@@ -955,70 +988,69 @@ static void tscam(struct Scsi_Host *host)
if ((m & assignid_map) != 0) {
continue;
}
- outb(0, dev->ioport[0] + 0x0f);
- outb(0, dev->ioport[0] + 0x12);
- outb(0, dev->ioport[0] + 0x13);
- outb(0, dev->ioport[0] + 0x14);
+ atp_writeb_io(dev, 0, 0x0f, 0);
+ atp_writeb_io(dev, 0, 0x12, 0);
+ atp_writeb_io(dev, 0, 0x13, 0);
+ atp_writeb_io(dev, 0, 0x14, 0);
if (i > 7) {
k = (i & 0x07) | 0x40;
} else {
k = i;
}
- outb(k, dev->ioport[0] + 0x15);
- if (dev->chip_ver == 4) {
- outb(0x01, dev->ioport[0] + 0x1b);
- } else {
- outb(0x00, dev->ioport[0] + 0x1b);
- }
+ atp_writeb_io(dev, 0, 0x15, k);
+ if (dev->chip_ver == 4)
+ atp_writeb_io(dev, 0, 0x1b, 0x01);
+ else
+ atp_writeb_io(dev, 0, 0x1b, 0x00);
do {
- outb(0x09, dev->ioport[0] + 0x18);
+ atp_writeb_io(dev, 0, 0x18, 0x09);
- while ((inb(dev->ioport[0] + 0x1f) & 0x80) == 0x00)
+ while ((atp_readb_io(dev, 0, 0x1f) & 0x80) == 0x00)
cpu_relax();
- k = inb(dev->ioport[0] + 0x17);
+ k = atp_readb_io(dev, 0, 0x17);
if ((k == 0x85) || (k == 0x42))
break;
if (k != 0x16)
- outb(0x41, dev->ioport[0] + 0x10);
+ atp_writeb_io(dev, 0, 0x10, 0x41);
} while (k != 0x16);
if ((k == 0x85) || (k == 0x42))
continue;
assignid_map |= m;
}
- outb(0x7f, dev->ioport[0] + 0x02);
- outb(0x02, dev->ioport[0] + 0x1b);
+ atp_writeb_io(dev, 0, 0x02, 0x7f);
+ atp_writeb_io(dev, 0, 0x1b, 0x02);
outb(0, 0x80);
val = 0x0080; /* bsy */
- outw(val, dev->ioport[0] + 0x1c);
+ atp_writew_io(dev, 0, 0x1c, val);
val |= 0x0040; /* sel */
- outw(val, dev->ioport[0] + 0x1c);
+ atp_writew_io(dev, 0, 0x1c, val);
val |= 0x0004; /* msg */
- outw(val, dev->ioport[0] + 0x1c);
+ atp_writew_io(dev, 0, 0x1c, val);
inb(0x80); /* 2 deskew delay(45ns*2=90ns) */
val &= 0x007f; /* no bsy */
- outw(val, dev->ioport[0] + 0x1c);
+ atp_writew_io(dev, 0, 0x1c, val);
mdelay(128);
val &= 0x00fb; /* after 1ms no msg */
- outw(val, dev->ioport[0] + 0x1c);
- while ((inb(dev->ioport[0] + 0x1c) & 0x04) != 0)
+ atp_writew_io(dev, 0, 0x1c, val);
+ while ((atp_readb_io(dev, 0, 0x1c) & 0x04) != 0)
;
outb(1, 0x80);
udelay(100);
for (n = 0; n < 0x30000; n++)
- if ((inb(dev->ioport[0] + 0x1c) & 0x80) != 0) /* bsy ? */
+ if ((atp_readb_io(dev, 0, 0x1c) & 0x80) != 0) /* bsy ? */
break;
if (n < 0x30000)
for (n = 0; n < 0x30000; n++)
- if ((inb(dev->ioport[0] + 0x1c) & 0x81) == 0x0081) {
+ if ((atp_readb_io(dev, 0, 0x1c) & 0x81) == 0x0081) {
inb(0x80);
val |= 0x8003; /* io,cd,db7 */
- outw(val, dev->ioport[0] + 0x1c);
+ atp_writew_io(dev, 0, 0x1c, val);
inb(0x80);
val &= 0x00bf; /* no sel */
- outw(val, dev->ioport[0] + 0x1c);
+ atp_writew_io(dev, 0, 0x1c, val);
outb(2, 0x80);
break;
}
@@ -1033,14 +1065,14 @@ static void tscam(struct Scsi_Host *host)
*/
mdelay(2);
udelay(48);
- if ((inb(dev->ioport[0] + 0x1c) & 0x80) == 0x00) { /* bsy ? */
- outw(0, dev->ioport[0] + 0x1c);
- outb(0, dev->ioport[0] + 0x1b);
- outb(0, dev->ioport[0] + 0x15);
- outb(0x09, dev->ioport[0] + 0x18);
- while ((inb(dev->ioport[0] + 0x1f) & 0x80) == 0)
+ if ((atp_readb_io(dev, 0, 0x1c) & 0x80) == 0x00) { /* bsy ? */
+ atp_writew_io(dev, 0, 0x1c, 0);
+ atp_writeb_io(dev, 0, 0x1b, 0);
+ atp_writeb_io(dev, 0, 0x15, 0);
+ atp_writeb_io(dev, 0, 0x18, 0x09);
+ while ((atp_readb_io(dev, 0, 0x1f) & 0x80) == 0)
cpu_relax();
- inb(dev->ioport[0] + 0x17);
+ atp_readb_io(dev, 0, 0x17);
return;
}
val &= 0x00ff; /* synchronization */
@@ -1055,7 +1087,7 @@ static void tscam(struct Scsi_Host *host)
j = 0;
while (1) {
- if ((inw(dev->ioport[0] + 0x1c) & 0x2000) == 0)
+ if ((atp_readw_io(dev, 0, 0x1c) & 0x2000) == 0)
continue;
outb(5, 0x80);
val &= 0x00ff; /* get ID_STRING */
@@ -2232,6 +2264,7 @@ static int atp870u_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
}
base_io = pci_resource_start(pdev, 0);
base_io &= 0xfffffff8;
+ atpdev->baseport = base_io;
if ((ent->device == ATP880_DEVID1)||(ent->device == ATP880_DEVID2)) {
atpdev->chip_ver = pdev->revision;
@@ -2356,7 +2389,6 @@ flash_ok_880:
atpdev->pdev = pdev;
atpdev->dev_id = ent->device;
- atpdev->baseport = base_io;
atpdev->ioport[0] = base_io + 0x80;
atpdev->ioport[1] = base_io + 0xc0;
atpdev->pciport[0] = base_io + 0x40;
@@ -2651,12 +2683,12 @@ static int atp870u_abort(struct scsi_cmnd * SCpnt)
printk("working=%x last_cmd=%x ", dev->working[c], dev->last_cmd[c]);
printk(" quhdu=%x quendu=%x ", dev->quhd[c], dev->quend[c]);
for (j = 0; j < 0x18; j++) {
- printk(" r%2x=%2x", j, inb(dev->ioport[c] + j));
+ printk(" r%2x=%2x", j, atp_readb_io(dev, c, j));
}
- printk(" r1c=%2x", inb(dev->ioport[c] + 0x1c));
- printk(" r1f=%2x in_snd=%2x ", inb(dev->ioport[c] + 0x1f), dev->in_snd[c]);
- printk(" d00=%2x", inb(dev->pciport[c]));
- printk(" d02=%2x", inb(dev->pciport[c] + 0x02));
+ printk(" r1c=%2x", atp_readb_io(dev, c, 0x1c));
+ printk(" r1f=%2x in_snd=%2x ", atp_readb_io(dev, c, 0x1f), dev->in_snd[c]);
+ printk(" d00=%2x", atp_readb_pci(dev, c, 0x00));
+ printk(" d02=%2x", atp_readb_pci(dev, c, 0x02));
for(j=0;j<16;j++) {
if (dev->id[c][j].curr_req != NULL) {
workrequ = dev->id[c][j].curr_req;
--
Ondrej Zary
next prev parent reply other threads:[~2015-07-26 20:55 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-26 20:24 [PATCH 00/52] atp870u: Major rework Ondrej Zary
2015-07-26 20:24 ` [PATCH 01/52] atp870u: Remove workport Ondrej Zary
2015-07-26 20:24 ` [PATCH 02/52] atp870u: Remove tmport1 Ondrej Zary
2015-07-26 20:24 ` [PATCH 03/52] atp870u: Untangle tmport Ondrej Zary
2015-07-26 20:24 ` [PATCH 04/52] atp870u: Untangle tmport #2 Ondrej Zary
2015-07-26 20:24 ` [PATCH 05/52] atp870u: Untangle tmport #3 Ondrej Zary
2015-07-26 20:24 ` [PATCH 06/52] atp870u: Untangle tmport #4 Ondrej Zary
2015-07-26 20:24 ` [PATCH 07/52] atp870u: Untangle tmport #5 Ondrej Zary
2015-07-26 20:24 ` [PATCH 08/52] atp870u: Untangle tmport #6 Ondrej Zary
2015-07-26 20:24 ` [PATCH 09/52] atp870u: Untangle tmport #7 Ondrej Zary
2015-07-26 20:24 ` [PATCH 10/52] atp870u: Untangle tmport #8 Ondrej Zary
2015-07-26 20:24 ` [PATCH 11/52] atp870u: Untangle tmpcip Ondrej Zary
2015-07-26 20:24 ` [PATCH 12/52] atp870u: Untangle tmpcip #2 Ondrej Zary
2015-07-26 20:24 ` [PATCH 13/52] atp870u: Remove ugly gotos Ondrej Zary
2015-07-26 20:24 ` [PATCH 14/52] atp870u: Remove ugly gotos #2 Ondrej Zary
2015-07-26 20:24 ` [PATCH 15/52] atp870u: Remove ugly gotos #3 Ondrej Zary
2015-07-26 20:24 ` [PATCH 16/52] atp870u: Remove ugly gotos #4 Ondrej Zary
2015-07-26 20:24 ` [PATCH 17/52] atp870u: Remove ugly gotos #5 Ondrej Zary
2015-07-26 20:24 ` Ondrej Zary [this message]
2015-07-26 20:24 ` [PATCH 19/52] atp870u: Convert is870() to use wrappers Ondrej Zary
2015-07-26 20:24 ` [PATCH 20/52] atp870u: Convert is880() " Ondrej Zary
2015-07-26 20:24 ` [PATCH 21/52] atp870u: Convert is885() " Ondrej Zary
2015-07-26 20:24 ` [PATCH 22/52] atp870u: Unify code format in is870(), is880() and is885() Ondrej Zary
2015-07-26 20:24 ` [PATCH 23/52] atp870u: Add channel parameter to is870() and is880() Ondrej Zary
2015-07-26 20:24 ` [PATCH 24/52] atp870u: Move chip-specific lines out of is880() and is885() Ondrej Zary
2015-07-26 20:24 ` [PATCH 25/52] atp870u: Remove is880() Ondrej Zary
2015-07-26 20:24 ` [PATCH 26/52] atp870u: Add wide_chip parameter to is870() and is885() Ondrej Zary
2015-07-26 20:24 ` [PATCH 27/52] atp870u: Add remaining 870 support to is885() Ondrej Zary
2015-07-26 20:24 ` [PATCH 28/52] atp870u: Move 870-specific code out of is870() Ondrej Zary
2015-07-26 20:24 ` [PATCH 29/52] atp870u: Remove is870() Ondrej Zary
2015-07-26 20:24 ` [PATCH 30/52] atp870u: Rename is885() to atp_is() Ondrej Zary
2015-07-26 20:24 ` [PATCH 31/52] atp870u: Convert remaining in[bwl] and out[bwl] to wrappers Ondrej Zary
2015-07-26 20:24 ` [PATCH 32/52] atp870u: Replace port 0x80 delay by udelay Ondrej Zary
2015-07-26 20:24 ` [PATCH 33/52] atp870u: Fix incorrect writeb_io access to register 0x3a Ondrej Zary
2015-07-26 20:24 ` [PATCH 34/52] atp870u: Introduce atp_set_host_id Ondrej Zary
2015-07-26 20:24 ` [PATCH 35/52] atp870u: Reduce log spam on module load/unload Ondrej Zary
2015-07-26 20:24 ` [PATCH 36/52] atp870u: Remove empty tscam_885() Ondrej Zary
2015-07-26 20:24 ` [PATCH 37/52] atp870u: Use module_pci_driver Ondrej Zary
2015-07-26 20:24 ` [PATCH 38/52] atp870u: Use n_io_port in request_region and release_region Ondrej Zary
2015-07-26 20:24 ` [PATCH 39/52] atp870u: Remove useless and broken card counting Ondrej Zary
2015-07-26 20:24 ` [PATCH 40/52] atp870u: Remove unused irq from struct atp_unit Ondrej Zary
2015-07-26 20:24 ` [PATCH 41/52] atp870u: Improve _probe() Ondrej Zary
2015-07-26 20:24 ` [PATCH 42/52] atp870u: Improve unsupported chip detection Ondrej Zary
2015-07-26 20:24 ` [PATCH 43/52] atp870u: Remove chip_ver from struct atp_unit Ondrej Zary
2015-07-26 20:24 ` [PATCH 44/52] atp870u: Simplify _probe() Ondrej Zary
2015-07-26 20:24 ` [PATCH 45/52] atp870u: Introduce is880(), is885() and remove dev_id Ondrej Zary
2015-07-26 20:24 ` [PATCH 46/52] atp870u: Use pci_request_regions Ondrej Zary
2015-07-26 20:24 ` [PATCH 47/52] atp870u: Request IRQ later, remove weird locking Ondrej Zary
2015-07-26 20:24 ` [PATCH 48/52] atp870u: Remove scam_on from struct atp_unit Ondrej Zary
2015-07-26 20:24 ` [PATCH 49/52] atp870u: Initialize tables earlier Ondrej Zary
2015-07-26 20:24 ` [PATCH 50/52] atp870u: Introduce atp880_init() Ondrej Zary
2015-07-26 20:24 ` [PATCH 51/52] atp870u: Introduce atp885_init() Ondrej Zary
2015-07-26 20:24 ` [PATCH 52/52] atp870u: Introduce atp870_init() Ondrej Zary
2015-07-27 8:56 ` [PATCH 00/52] atp870u: Major rework Hannes Reinecke
2015-10-04 7:57 ` Christoph Hellwig
-- strict thread matches above, loose matches on Subject: below --
2015-11-17 18:23 [PATCH 00/52] [resend] " Ondrej Zary
2015-11-17 18:23 ` [PATCH 18/52] atp870u: Introduce HW access wrappers Ondrej Zary
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1437942299-26674-19-git-send-email-linux@rainbow-software.org \
--to=linux@rainbow-software.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.