Re: [PATCH v6 7/8] dmaengine: add a driver for Intel integrated DMA 64-bit

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

On Tue, 2015-07-28 at 08:53 +0100, Lee Jones wrote:
> FAO Vinod,
> 
> On Tue, 28 Jul 2015, Lee Jones wrote:
> > On Mon, 27 Jul 2015, Andy Shevchenko wrote:
> > 
> > > Intel integrated DMA (iDMA) 64-bit is a specific IP that is used 
> > > as a part of
> > > LPSS devices such as HSUART or SPI. The iDMA IP is attached for 
> > > private
> > > usage on each host controller independently.
> > > 
> > > While it has similarities with Synopsys DesignWare DMA, the 
> > > following
> > > distinctions doesn't allow to use the existing driver:
> > > - 64-bit mode with corresponding changes in Hardware Linked List 
> > > data structure
> > > - many slight differences in the channel registers
> > > 
> > > Moreover this driver is based on the DMA virtual channels 
> > > framework that helps
> > > to make the driver cleaner and easy to understand.
> > > 
> > > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com
> > > >
> > > ---
> > >  drivers/dma/Kconfig  |   8 +
> > >  drivers/dma/Makefile |   1 +
> > >  drivers/dma/idma64.c | 710 
> > > +++++++++++++++++++++++++++++++++++++++++++++++++++
> > >  drivers/dma/idma64.h | 233 +++++++++++++++++
> > >  4 files changed, 952 insertions(+)
> > >  create mode 100644 drivers/dma/idma64.c
> > >  create mode 100644 drivers/dma/idma64.h
> > 
> > Applied, thanks.  Pull request to follow.
> 
> Will send out a pull request when I have Vinod's Ack.

Vinod, could you have a look at this once again?

> 
> [...]
> 
> Patches will still be applied to -next for soak testing though.

Thanks!


-- 
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy