From: <gregkh@linuxfoundation.org>
To: ludovic.desroches@atmel.com, gregkh@linuxfoundation.org,
khilman@linaro.org, nicolas.ferre@atmel.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "ARM: at91/dt: sama5d4: fix dma conf for aes, sha and tdes nodes" has been added to the 4.1-stable tree
Date: Thu, 30 Jul 2015 12:12:03 -0700 [thread overview]
Message-ID: <143828352323418@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
ARM: at91/dt: sama5d4: fix dma conf for aes, sha and tdes nodes
to the 4.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm-at91-dt-sama5d4-fix-dma-conf-for-aes-sha-and-tdes-nodes.patch
and it can be found in the queue-4.1 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From aabbe8f1a561dd8318e693830d9ae377c9a04d2b Mon Sep 17 00:00:00 2001
From: "ludovic.desroches@atmel.com" <ludovic.desroches@atmel.com>
Date: Mon, 8 Jun 2015 15:55:48 +0200
Subject: ARM: at91/dt: sama5d4: fix dma conf for aes, sha and tdes nodes
From: "ludovic.desroches@atmel.com" <ludovic.desroches@atmel.com>
commit aabbe8f1a561dd8318e693830d9ae377c9a04d2b upstream.
The xdmac channel configuration is done in one cell not two. This error
prevents from probing devices correctly.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Fixes: 83906783b766 ("ARM: at91/dt: sama5d4: add aes, sha and tdes nodes")
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/boot/dts/sama5d4.dtsi | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -1125,10 +1125,10 @@
compatible = "atmel,at91sam9g46-aes";
reg = <0xfc044000 0x100>;
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
- dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
- AT91_XDMAC_DT_PERID(41)>,
- <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
- AT91_XDMAC_DT_PERID(40)>;
+ dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(41))>,
+ <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(40))>;
dma-names = "tx", "rx";
clocks = <&aes_clk>;
clock-names = "aes_clk";
@@ -1139,10 +1139,10 @@
compatible = "atmel,at91sam9g46-tdes";
reg = <0xfc04c000 0x100>;
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 0>;
- dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
- AT91_XDMAC_DT_PERID(42)>,
- <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
- AT91_XDMAC_DT_PERID(43)>;
+ dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(42))>,
+ <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(43))>;
dma-names = "tx", "rx";
clocks = <&tdes_clk>;
clock-names = "tdes_clk";
@@ -1153,8 +1153,8 @@
compatible = "atmel,at91sam9g46-sha";
reg = <0xfc050000 0x100>;
interrupts = <15 IRQ_TYPE_LEVEL_HIGH 0>;
- dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
- AT91_XDMAC_DT_PERID(44)>;
+ dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(44))>;
dma-names = "tx";
clocks = <&sha_clk>;
clock-names = "sha_clk";
Patches currently in stable-queue which might be from ludovic.desroches@atmel.com are
queue-4.1/arm-at91-dt-sama5d4ek-mci0-uses-slot-0.patch
queue-4.1/i2c-at91-fix-a-race-condition-when-using-the-dma-controller.patch
queue-4.1/arm-at91-dt-sama5d4-fix-dma-conf-for-aes-sha-and-tdes-nodes.patch
reply other threads:[~2015-07-30 19:12 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=143828352323418@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=khilman@linaro.org \
--cc=ludovic.desroches@atmel.com \
--cc=nicolas.ferre@atmel.com \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.