From: Tom Rini <trini@konsulko.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 4/5] dra7xx: Move CONS_INDEX to Kconfig and enable CONFIG_SPL_STACK_ADDR
Date: Fri, 31 Jul 2015 19:55:11 -0400 [thread overview]
Message-ID: <1438386912-14711-4-git-send-email-trini@konsulko.com> (raw)
In-Reply-To: <1438386912-14711-1-git-send-email-trini@konsulko.com>
- Move the CONS_INDEX selection out of CONFIG_SYS_EXTRA_OPTIONS and
into Kconfig proper.
- While in here, enable CONFIG_SPL_STACK_ADDR
Signed-off-by: Tom Rini <trini@konsulko.com>
---
board/ti/dra7xx/Kconfig | 8 ++++++++
configs/dra7xx_evm_defconfig | 3 ++-
configs/dra7xx_evm_qspiboot_defconfig | 4 +++-
configs/dra7xx_evm_uart3_defconfig | 5 ++++-
4 files changed, 17 insertions(+), 3 deletions(-)
diff --git a/board/ti/dra7xx/Kconfig b/board/ti/dra7xx/Kconfig
index 3bbd866..80341d9 100644
--- a/board/ti/dra7xx/Kconfig
+++ b/board/ti/dra7xx/Kconfig
@@ -9,4 +9,12 @@ config SYS_VENDOR
config SYS_CONFIG_NAME
default "dra7xx_evm"
+config CONS_INDEX
+ int "UART used for console"
+ range 1 6
+ default 1
+ help
+ The DRA7xx (and AM57x) SoC has a total of 6 UARTs available to it.
+ Depending on your specific board you may want something other than UART1
+ here.
endif
diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig
index 463a7e2..f98e7b7 100644
--- a/configs/dra7xx_evm_defconfig
+++ b/configs/dra7xx_evm_defconfig
@@ -2,7 +2,8 @@ CONFIG_ARM=y
CONFIG_OMAP54XX=y
CONFIG_TARGET_DRA7XX_EVM=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1"
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_ADDR=0x82000000
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_SETEXPR is not set
diff --git a/configs/dra7xx_evm_qspiboot_defconfig b/configs/dra7xx_evm_qspiboot_defconfig
index 90e3cf4..f14fa62 100644
--- a/configs/dra7xx_evm_qspiboot_defconfig
+++ b/configs/dra7xx_evm_qspiboot_defconfig
@@ -2,7 +2,9 @@ CONFIG_ARM=y
CONFIG_OMAP54XX=y
CONFIG_TARGET_DRA7XX_EVM=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1,QSPI_BOOT"
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_ADDR=0x82000000
+CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_SETEXPR is not set
diff --git a/configs/dra7xx_evm_uart3_defconfig b/configs/dra7xx_evm_uart3_defconfig
index 474cada..8882260 100644
--- a/configs/dra7xx_evm_uart3_defconfig
+++ b/configs/dra7xx_evm_uart3_defconfig
@@ -1,8 +1,11 @@
CONFIG_ARM=y
CONFIG_OMAP54XX=y
CONFIG_TARGET_DRA7XX_EVM=y
+CONFIG_CONS_INDEX=3
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=3,SPL_YMODEM_SUPPORT"
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_ADDR=0x82000000
+CONFIG_SYS_EXTRA_OPTIONS="SPL_YMODEM_SUPPORT"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_SETEXPR is not set
--
1.7.9.5
next prev parent reply other threads:[~2015-07-31 23:55 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-31 23:55 [U-Boot] [PATCH 1/5] am33xx: Update DT files, add am335x_gp_evm_config target Tom Rini
2015-07-31 23:55 ` [U-Boot] [PATCH 2/5] gpio: omap: Drop 'method' parameter Tom Rini
2015-08-13 13:22 ` [U-Boot] [U-Boot,2/5] " Tom Rini
2015-07-31 23:55 ` [U-Boot] [PATCH 3/5] ARM: SPL: Use CONFIG_SPL_DM not CONFIG_DM Tom Rini
2015-08-13 13:22 ` [U-Boot] [U-Boot, " Tom Rini
2015-07-31 23:55 ` Tom Rini [this message]
2015-08-13 13:22 ` [U-Boot] [U-Boot, 4/5] dra7xx: Move CONS_INDEX to Kconfig and enable CONFIG_SPL_STACK_ADDR Tom Rini
2015-07-31 23:55 ` [U-Boot] [PATCH 5/5] dra7xx: Add dra72_evm_defconfig using CONFIG_DM Tom Rini
2015-08-02 21:29 ` Simon Glass
2015-08-02 23:07 ` Tom Rini
2015-08-02 23:22 ` Simon Glass
2015-08-02 23:29 ` Tom Rini
2015-08-02 23:32 ` Simon Glass
2015-08-13 13:22 ` [U-Boot] [U-Boot, " Tom Rini
2015-08-13 13:22 ` [U-Boot] [U-Boot, 1/5] am33xx: Update DT files, add am335x_gp_evm_config target Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1438386912-14711-4-git-send-email-trini@konsulko.com \
--to=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.