Re: GPMC in device tree

[Scott Wood <scottwood@freescale.com>]

On Wed, 2015-08-05 at 00:22 +0300, Ran Shalit wrote:
> On Tue, Aug 4, 2015 at 11:31 PM, Scott Wood <scottwood@freescale.com> wrote:
> > On Tue, 2015-08-04 at 23:26 +0300, Ran Shalit wrote:
> > > On Tue, Aug 4, 2015 at 9:54 PM, Scott Wood <scottwood@freescale.com> 
> > > wrote:
> > > > On Tue, 2015-08-04 at 18:29 +0300, Ran Shalit wrote:
> > > > > Hello,
> > > > > 
> > > > > I would please like to ask if describing flash nor used with GPMC,
> > > > > whould be done as described in:
> > > > > https://www.kernel.org/doc/Documentation/devicetree/bindings/mtd/gpmc-nor.txt
> > > > > It is described in the above link as "TI's GPMC", so I'm not sure if
> > > > > it is relevent for powerpc too.
> > > > 
> > > > That binding is for TI GPMC.
> > > > 
> > > > Are you saying you have some PPC chip that has a flash controller 
> > > > called
> > > > GPMC?
> > > > 
> > > > -Scott
> > > > 
> > > 
> > > Hi Scott,
> > > 
> > > Thanks, I've worked with TI's chips, so I now understand that I made
> > > here some confusion...
> > > It is GPCM , not GPMC, my mistake.
> > > We already configured it in u-boot, but on doing read/write from
> > > kernel it doesn not work.
> > > It seems that for the linux to use the correct driver, we need to
> > > define the nor in the device tree.
> > > Is there any example how to define nor GPCM in device tree ? Is it
> > > possible not to override the existing GPCM configuration ?
> > 
> > Pretty much all of the mpc8xxx/qoriq device trees have GPCM NOR defined.  
> > See
> > Documentation/devicetree/bindings/powerpc/fsl/lbc.txt and examples such as
> > arch/powerpc/boot/dts/p4080ds.dts (part of the lbc node is in
> > arch/powerpc/boot/dts/fsl/p4080si-post.dtsi).
> > 
> > Linux will not change the GPCM configuration.
> > 
> > -Scott
> > 
> 
> On more thing, if I may.
> The localbus is also connected to nvram & cpld.
> I've noticed that read/write works well, even though I didn't define
> anything in device tree.
> Is there any reasom to add these devices into device tree, or can we
> use the cpld and nvram without the definition in device tree ?

I don't know what you're doing in your kernel to access devices that aren't 
in the device tree.  You should add the devices to the device tree, and have 
the kernel use it rather than hardcoded info.

-Scott