From: Arend van Spriel <arend@broadcom.com>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless <linux-wireless@vger.kernel.org>,
Arend van Spriel <arend@broadcom.com>
Subject: [PATCH V2 2/7] brcmfmac: correct interface combination info
Date: Sun, 16 Aug 2015 08:55:34 +0200 [thread overview]
Message-ID: <1439708139-7527-3-git-send-email-arend@broadcom.com> (raw)
In-Reply-To: <1439708139-7527-1-git-send-email-arend@broadcom.com>
The interface combination provided by brcmfmac did not truly reflect
the combinations supported by driver and/or firmware.
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Pontus Fuchs <pontusf@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
---
drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c | 151 +++++++++++++++------
1 file changed, 112 insertions(+), 39 deletions(-)
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
index ffe5260..17cf1bc 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
@@ -5695,63 +5695,132 @@ brcmf_txrx_stypes[NUM_NL80211_IFTYPES] = {
}
};
+/**
+ * brcmf_setup_ifmodes() - determine interface modes and combinations.
+ *
+ * @wiphy: wiphy object.
+ * @ifp: interface object needed for feat module api.
+ *
+ * The interface modes and combinations are determined dynamically here
+ * based on firmware functionality.
+ *
+ * no p2p and no mbss:
+ *
+ * #STA <= 1, #AP <= 1, channels = 1, 2 total
+ *
+ * no p2p and mbss:
+ *
+ * #STA <= 1, #AP <= 1, channels = 1, 2 total
+ * #AP <= 4, matching BI, channels = 1, 4 total
+ *
+ * p2p, no mchan, and mbss:
+ *
+ * #STA <= 1, #P2P-DEV <= 1, #{P2P-CL, P2P-GO} <= 1, channels = 1, 3 total
+ * #STA <= 1, #P2P-DEV <= 1, #AP <= 1, #P2P-CL <= 1, channels = 1, 4 total
+ * #AP <= 4, matching BI, channels = 1, 4 total
+ *
+ * p2p, mchan, and mbss:
+ *
+ * #STA <= 1, #P2P-DEV <= 1, #{P2P-CL, P2P-GO} <= 1, channels = 2, 3 total
+ * #STA <= 1, #P2P-DEV <= 1, #AP <= 1, #P2P-CL <= 1, channels = 1, 4 total
+ * #AP <= 4, matching BI, channels = 1, 4 total
+ */
static int brcmf_setup_ifmodes(struct wiphy *wiphy, struct brcmf_if *ifp)
{
struct ieee80211_iface_combination *combo = NULL;
- struct ieee80211_iface_limit *limits = NULL;
- int i = 0, max_iface_cnt;
+ struct ieee80211_iface_limit *c0_limits = NULL;
+ struct ieee80211_iface_limit *p2p_limits = NULL;
+ struct ieee80211_iface_limit *mbss_limits = NULL;
+ bool mbss, p2p;
+ int i, c, n_combos;
+
+ mbss = brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MBSS);
+ p2p = brcmf_feat_is_enabled(ifp, BRCMF_FEAT_P2P);
- combo = kzalloc(sizeof(*combo), GFP_KERNEL);
+ n_combos = 1 + !!p2p + !!mbss;
+ combo = kcalloc(n_combos, sizeof(*combo), GFP_KERNEL);
if (!combo)
goto err;
- limits = kzalloc(sizeof(*limits) * 4, GFP_KERNEL);
- if (!limits)
+ c0_limits = kcalloc(p2p ? 3 : 2, sizeof(*c0_limits), GFP_KERNEL);
+ if (!c0_limits)
goto err;
+ if (p2p) {
+ p2p_limits = kcalloc(4, sizeof(*p2p_limits), GFP_KERNEL);
+ if (!p2p_limits)
+ goto err;
+ }
+
+ if (mbss) {
+ mbss_limits = kcalloc(1, sizeof(*mbss_limits), GFP_KERNEL);
+ if (!mbss_limits)
+ goto err;
+ }
+
wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_ADHOC) |
BIT(NL80211_IFTYPE_AP);
- if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MCHAN))
- combo->num_different_channels = 2;
- else
- combo->num_different_channels = 1;
-
- if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MBSS)) {
- limits[i].max = 1;
- limits[i++].types = BIT(NL80211_IFTYPE_STATION);
- limits[i].max = 4;
- limits[i++].types = BIT(NL80211_IFTYPE_AP);
- max_iface_cnt = 5;
- } else {
- limits[i].max = 2;
- limits[i++].types = BIT(NL80211_IFTYPE_STATION) |
- BIT(NL80211_IFTYPE_AP);
- max_iface_cnt = 2;
- }
-
- if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_P2P)) {
+ c = 0;
+ i = 0;
+ combo[c].num_different_channels = 1;
+ c0_limits[i].max = 1;
+ c0_limits[i++].types = BIT(NL80211_IFTYPE_STATION);
+ if (p2p) {
+ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MCHAN))
+ combo[c].num_different_channels = 2;
wiphy->interface_modes |= BIT(NL80211_IFTYPE_P2P_CLIENT) |
BIT(NL80211_IFTYPE_P2P_GO) |
BIT(NL80211_IFTYPE_P2P_DEVICE);
- limits[i].max = 1;
- limits[i++].types = BIT(NL80211_IFTYPE_P2P_CLIENT) |
- BIT(NL80211_IFTYPE_P2P_GO);
- limits[i].max = 1;
- limits[i++].types = BIT(NL80211_IFTYPE_P2P_DEVICE);
- max_iface_cnt += 2;
- }
- combo->max_interfaces = max_iface_cnt;
- combo->limits = limits;
- combo->n_limits = i;
-
+ c0_limits[i].max = 1;
+ c0_limits[i++].types = BIT(NL80211_IFTYPE_P2P_DEVICE);
+ c0_limits[i].max = 1;
+ c0_limits[i++].types = BIT(NL80211_IFTYPE_P2P_CLIENT) |
+ BIT(NL80211_IFTYPE_P2P_GO);
+ } else {
+ c0_limits[i].max = 1;
+ c0_limits[i++].types = BIT(NL80211_IFTYPE_AP);
+ }
+ combo[c].max_interfaces = i;
+ combo[c].n_limits = i;
+ combo[c].limits = c0_limits;
+
+ if (p2p) {
+ c++;
+ i = 0;
+ combo[c].num_different_channels = 1;
+ p2p_limits[i].max = 1;
+ p2p_limits[i++].types = BIT(NL80211_IFTYPE_STATION);
+ p2p_limits[i].max = 1;
+ p2p_limits[i++].types = BIT(NL80211_IFTYPE_AP);
+ p2p_limits[i].max = 1;
+ p2p_limits[i++].types = BIT(NL80211_IFTYPE_P2P_CLIENT);
+ p2p_limits[i].max = 1;
+ p2p_limits[i++].types = BIT(NL80211_IFTYPE_P2P_DEVICE);
+ combo[c].max_interfaces = i;
+ combo[c].n_limits = i;
+ combo[c].limits = p2p_limits;
+ }
+
+ if (mbss) {
+ c++;
+ combo[c].beacon_int_infra_match = true;
+ combo[c].num_different_channels = 1;
+ mbss_limits[0].max = 4;
+ mbss_limits[0].types = BIT(NL80211_IFTYPE_AP);
+ combo[c].max_interfaces = 4;
+ combo[c].n_limits = 1;
+ combo[c].limits = mbss_limits;
+ }
+ wiphy->n_iface_combinations = n_combos;
wiphy->iface_combinations = combo;
- wiphy->n_iface_combinations = 1;
return 0;
err:
- kfree(limits);
+ kfree(c0_limits);
+ kfree(p2p_limits);
+ kfree(mbss_limits);
kfree(combo);
return -ENOMEM;
}
@@ -6073,11 +6142,15 @@ static void brcmf_cfg80211_reg_notifier(struct wiphy *wiphy,
static void brcmf_free_wiphy(struct wiphy *wiphy)
{
+ int i;
+
if (!wiphy)
return;
- if (wiphy->iface_combinations)
- kfree(wiphy->iface_combinations->limits);
+ if (wiphy->iface_combinations) {
+ for (i = 0; i < wiphy->n_iface_combinations; i++)
+ kfree(wiphy->iface_combinations[i].limits);
+ }
kfree(wiphy->iface_combinations);
if (wiphy->bands[IEEE80211_BAND_2GHZ]) {
kfree(wiphy->bands[IEEE80211_BAND_2GHZ]->channels);
--
1.9.1
next prev parent reply other threads:[~2015-08-16 6:55 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-16 6:55 [PATCH V2 0/7] brcmfmac: nvram loading and code rework Arend van Spriel
2015-08-16 6:55 ` [PATCH V2 1/7] brcmfmac: Add support for host platform NVRAM loading Arend van Spriel
2015-08-19 16:38 ` Rafał Miłecki
2015-08-19 20:55 ` Arend van Spriel
2015-08-20 19:50 ` Arend van Spriel
2015-08-24 19:28 ` Kalle Valo
2015-08-16 6:55 ` Arend van Spriel [this message]
2015-08-19 21:49 ` [PATCH V2 2/7] brcmfmac: correct interface combination info Rafał Miłecki
2015-08-19 21:59 ` Arend van Spriel
2015-08-16 6:55 ` [PATCH V2 3/7] brcmfmac: Increase nr of supported flowrings Arend van Spriel
2015-08-19 21:56 ` Rafał Miłecki
2015-08-24 14:15 ` Arend van Spriel
2015-08-24 20:02 ` Rafał Miłecki
2015-08-29 8:13 ` Arend van Spriel
2015-08-29 9:38 ` Rafał Miłecki
2015-08-29 10:48 ` Arend van Spriel
2015-08-20 16:16 ` Rafał Miłecki
2015-08-20 16:39 ` Arend van Spriel
2015-08-16 6:55 ` [PATCH V2 4/7] brcmfmac: add debugfs entry for msgbuf statistics Arend van Spriel
2015-08-16 6:55 ` [PATCH V2 5/7] brcmfmac: make use of cfg80211_check_combinations() Arend van Spriel
2015-08-16 6:55 ` [PATCH V2 6/7] brcmfmac: block the correct flowring when backup queue overflow Arend van Spriel
2015-08-16 6:55 ` [PATCH V2 7/7] brcmfmac: bump highest event number for 4339 firmware Arend van Spriel
2015-08-16 15:10 ` [PATCH V2 0/7] brcmfmac: nvram loading and code rework Rafał Miłecki
2015-08-17 8:01 ` Arend van Spriel
2015-08-17 14:25 ` Rafał Miłecki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1439708139-7527-3-git-send-email-arend@broadcom.com \
--to=arend@broadcom.com \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.