From: Michael Neuling <mikey@neuling.org>
To: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Linux PPC <linuxppc-dev@lists.ozlabs.org>,
"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>,
Michael Ellerman <mpe@ellerman.id.au>,
Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Subject: Re: [RESEND] Soft lockup after huge page offline attempt
Date: Wed, 02 Sep 2015 20:20:21 +1000 [thread overview]
Message-ID: <1441189221.7208.19.camel@neuling.org> (raw)
In-Reply-To: <55E6CA60.6030502@linux.vnet.ibm.com>
On Wed, 2015-09-02 at 15:37 +0530, Anshuman Khandual wrote:
> Hello,
>=20
> Worked on a modified version of the following selftest
> test case in the kernel source.
>=20
> tools/testing/selftests/vm/hugepage-mmap.c
Please send the test case and how to run it here.
Mikey
> This modified test will try to do the following sequence of
> events in the same order.
>=20
> (1) Allocate 16 Huge TLB pages (16MB each) through mmap
>=20
> (2) mlock() the entire range of 256MB memory
>=20
> (3) Fetch PFN from /proc/self/pagemap for each huge TLB page
> starting address present in the 256MB range
>=20
> (4) Convert each PFN into PA as PFN << PAGE_SHIFT which is then
> written into /sys/devices/system/memory/soft_offline_page
>=20
> (5) unmap() the 256MB memory range
>=20
> (6) unlink() the file (inside the hugetlbfs mount path) used for mmap
>=20
> The soft offline page attempts fail as expected as we dont support that o=
n
> POWER yet.
>=20
> [ 145.359405] soft offline: 0xba100: migration failed 1, type 43ffff0000=
04008
> [ 145.359572] soft offline: 0xba200: migration failed 1, type 43ffff0000=
04008
> [ 145.359644] soft offline: 0xba300: migration failed 1, type 43ffff0000=
04008
> [ 145.359716] soft offline: 0xba400: migration failed 1, type 43ffff0000=
04008
> [ 145.359783] soft offline: 0xba500: migration failed 1, type 43ffff0000=
04008
> [ 145.359853] soft offline: 0xba600: migration failed 1, type 43ffff0000=
04008
> [ 145.359931] soft offline: 0xba700: migration failed 1, type 43ffff0000=
04008
> [ 145.360008] soft offline: 0xba800: migration failed 1, type 43ffff0000=
04008
> [ 145.360080] soft offline: 0xba900: migration failed 1, type 43ffff0000=
04008
> [ 145.360148] soft offline: 0xbaa00: migration failed 1, type 43ffff0000=
04008
> [ 145.360218] soft offline: 0xbab00: migration failed 1, type 43ffff0000=
04008
> [ 145.360286] soft offline: 0xbac00: migration failed 1, type 43ffff0000=
04008
> [ 145.360353] soft offline: 0xbad00: migration failed 1, type 43ffff0000=
04008
> [ 145.360420] soft offline: 0xbae00: migration failed 1, type 43ffff0000=
04008
> [ 145.360485] soft offline: 0xbaf00: migration failed 1, type 43ffff0000=
04008
> [ 145.360552] soft offline: 0xbb000: migration failed 1, type 43ffff0000=
04008
>=20
> But interestingly the test thread hangs for good after that. We can see t=
his
> soft lock up message in the console.
>=20
> [ 168.038353] NMI watchdog: BUG: soft lockup - CPU#3 stuck for 22s! [hug=
epage-mmap:1238]
> [ 168.038384] Modules linked in: windfarm_smu_sat i2c_core pseries_rng w=
indfarm_pid xfs libcrc32c ibmvscsi scsi_transport_srp ibmveth
> [ 168.038411] CPU: 3 PID: 1238 Comm: hugepage-mmap Not tainted 4.2.0+ #7
> [ 168.038416] task: c0000000ffa304b0 ti: c000000beff8c000 task.ti: c0000=
00beff8c000
> [ 168.038422] NIP: c000000000228164 LR: c00000000022820c CTR: c000000000=
3ff060
> [ 168.038428] REGS: c000000beff8f8c0 TRAP: 0901 Not tainted (4.2.0+)
> [ 168.038432] MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 22000228=
XER: 00000000
> [ 168.038446] CFAR: c000000000228180 SOFTE: 1=20
> GPR00: 0000000000000000 c000000beff8fb40 c000000001306000 f000000002e8400=
0=20
> GPR04: c000000beff8fb60 0000000000000220 c000000bf98b5248 000000000000000=
0=20
> GPR08: 0000000000000044 0000000000000000 f000000002e8401c 000000000000000=
0=20
> GPR12: 0000000000000000 c00000000ea51c80=20
> [ 168.038483] NIP [c000000000228164] find_get_pages+0xa4/0x1e0
> [ 168.038489] LR [c00000000022820c] find_get_pages+0x14c/0x1e0
> [ 168.038493] Call Trace:
> [ 168.038496] [c000000beff8fb40] [c000000beff8fbc0] 0xc000000beff8fbc0 (=
unreliable)
> [ 168.038503] [c000000beff8fbc0] [c00000000023ba20] pagevec_lookup+0x50/=
0x80
> [ 168.038510] [c000000beff8fc00] [c0000000003fe630] truncate_hugepages+0=
xb0/0x280
> [ 168.038517] [c000000beff8fd10] [c0000000003ff090] hugetlbfs_evict_inod=
e+0x30/0x70
> [ 168.038524] [c000000beff8fd40] [c0000000002f1d34] evict+0xf4/0x290
> [ 168.038531] [c000000beff8fd80] [c0000000002e3268] do_unlinkat+0x208/0x=
370
> [ 168.038538] [c000000beff8fe30] [c000000000009360] system_call+0x38/0xd=
0
> [ 168.038543] Instruction dump:
> [ 168.038546] 419e00c8 e87f0000 2fa30000 419e0080 786907a1 408200d8 813b=
000c 552902ee=20
> [ 168.038556] 0b090000 3943001c 7c2004ac 7d205028 <2c090000> 41c20014 31=
090001 7d00512d=20
>=20
> After a while, we see these messages as well on the console before it fre=
ezes.
>=20
> INFO: rcu_sched self-detected stall on CPU
> [ 205.368370] 3: (5999 ticks this GP) idle=3Db23/140000000000001/0 soft=
irq=3D1329/1329 fqs=3D6000=20
> [ 205.368375] (t=3D6000 jiffies g=3D896 c=3D895 q=3D678)
> [ 205.368383] Task dump for CPU 3:
> [ 205.368387] hugepage-mmap R running task 0 1238 1233 0x00=
042004
> [ 205.368394] Call Trace:
> [ 205.368401] [c000000beff8f3e0] [c000000000106660] sched_show_task+0xe0=
/0x180 (unreliable)
> [ 205.368409] [c000000beff8f450] [c00000000014d9e4] rcu_dump_cpu_stacks+=
0xe4/0x150
> [ 205.368416] [c000000beff8f4a0] [c0000000001529c4] rcu_check_callbacks+=
0x6b4/0x9b0
> [ 205.368424] [c000000beff8f5d0] [c000000000159ee4] update_process_times=
+0x54/0xa0
> [ 205.368431] [c000000beff8f600] [c000000000170b48] tick_sched_handle.is=
ra.6+0x48/0xe0
> [ 205.368437] [c000000beff8f640] [c000000000170c44] tick_sched_timer+0x6=
4/0xd0
> [ 205.368444] [c000000beff8f680] [c00000000015a954] __hrtimer_run_queues=
+0x124/0x3c0
> [ 205.368450] [c000000beff8f710] [c00000000015b88c] hrtimer_interrupt+0x=
ec/0x2c0
> [ 205.368457] [c000000beff8f7d0] [c00000000001f77c] __timer_interrupt+0x=
8c/0x230
> [ 205.368464] [c000000beff8f820] [c00000000001fe30] timer_interrupt+0xa0=
/0xe0
> [ 205.368470] [c000000beff8f850] [c000000000002768] decrementer_common+0=
x168/0x180
> [ 205.368478] --- interrupt: 901 at find_get_pages+0xa0/0x1e0
> [ 205.368478] LR =3D find_get_pages+0x14c/0x1e0
> [ 205.368486] [c000000beff8fb40] [c000000beff8fbc0] 0xc000000beff8fbc0 (=
unreliable)
> [ 205.368493] [c000000beff8fbc0] [c00000000023ba20] pagevec_lookup+0x50/=
0x80
> [ 205.368500] [c000000beff8fc00] [c0000000003fe630] truncate_hugepages+0=
xb0/0x280
> [ 205.368507] [c000000beff8fd10] [c0000000003ff090] hugetlbfs_evict_inod=
e+0x30/0x70
> [ 205.368513] [c000000beff8fd40] [c0000000002f1d34] evict+0xf4/0x290
> [ 205.368520] [c000000beff8fd80] [c0000000002e3268] do_unlinkat+0x208/0x=
370
> [ 205.368526] [c000000beff8fe30] [c000000000009360] system_call+0x38/0xd=
0
>=20
>=20
> Then the entire system hangs for good, requiring a reboot. The problem ca=
n be recreated
> without unlink() step if we just try to unmount the hugetlbfs afterwards.=
I am still
> looking into this problem. Please do let me know if you have any suggesti=
ons/thoughts
> or comments about this issue.
>=20
> Regards
> Anshuman
>=20
next prev parent reply other threads:[~2015-09-02 10:20 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-02 10:07 [RESEND] Soft lockup after huge page offline attempt Anshuman Khandual
2015-09-02 10:20 ` Michael Neuling [this message]
2015-09-02 11:14 ` Anshuman Khandual
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1441189221.7208.19.camel@neuling.org \
--to=mikey@neuling.org \
--cc=aneesh.kumar@linux.vnet.ibm.com \
--cc=khandual@linux.vnet.ibm.com \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=nacc@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.