3rd posting: em28xx: new board id [1f4d:1abe]

[Ronald Tallent <ron@tallent.ws>]

Hi, 

This is my third attempt to post this information to mailing list in a
little over a week. Am I invisible? Can nobody see my messages? I have
precisely followed the instructions posted on
linuxtv.org/wiki/index.php/Em28xx_devices#How_to_validate_my_vendor.2Fproduct_id_at_upstream_kernel.3F
trying to get my hardware validated. What else do I need to do?  Can
someone answer please and help me. 

Thanks,
--Ronald


I've tested my USB easycap device (Geniatech iGrabber) in Ubuntu
14.04.

Make: Geniatech
Model: iGrabber for MAC
Vendor/Product ID: [1f4d:1abe]
Product website: www.geniatech.com/pa/igrabber.asp

Tests Made:
- Audio Capture [worked]
- Video Capture [device not detected]
- DVB [does not have DVB]

Tested by:
ron@tallent.ws


Detailed information on device and system below for reference:

uname -a:
3.13.0-62-generic #102-Ubuntu SMP Tue Aug 11 14:29:36 UTC 2015 x86_64 
x86_64 x86_64 GNU/Linux

dmesg:
[] usb 3-3.3: new high-speed USB device number 8 using xhci_hcd
[] usb 3-3.3: New USB device found, idVendor=1f4d, idProduct=1abe
[] usb 3-3.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[] usb 3-3.3: Product: USB Device
[] usbcore: registered new interface driver snd-usb-audio

lsusb:
Bus 003 Device 008: ID 1f4d:1abe G-Tek Electronics Group 

Hardware: 
Opened the case and found the following text printed on the board:
   HandyCap
   v1.51
   2007-4-24

Three chips on board are:
1: empia
   EM2860
   P8367-010
   201036-01AG

2: Trident
   SAA7113H
   C2P409.00 02
   A5G11152

3: eMPIA
   Technology
   EMP202
   UT11958
   1027