From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
To: <lee.jones@linaro.org>
Cc: <sameo@linux.intel.com>, <linux-kernel@vger.kernel.org>,
<patches@opensource.wolfsonmicro.com>
Subject: [PATCH] mfd: wm8998: Fixup register defaults/readables
Date: Wed, 9 Sep 2015 09:39:30 +0100 [thread overview]
Message-ID: <1441787970-30438-1-git-send-email-ckeepax@opensource.wolfsonmicro.com> (raw)
Remove defaults for a bunch of volatile registers and remove
ARIZONA_CTRL_IF_SPI_CFG_1 from the readable list since it doesn't exist
on wm8998 which is I2C only.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---
drivers/mfd/wm8998-tables.c | 8 --------
1 files changed, 0 insertions(+), 8 deletions(-)
diff --git a/drivers/mfd/wm8998-tables.c b/drivers/mfd/wm8998-tables.c
index e6de3cd..08fc520 100644
--- a/drivers/mfd/wm8998-tables.c
+++ b/drivers/mfd/wm8998-tables.c
@@ -199,8 +199,6 @@ static const struct reg_default wm8998_reg_default[] = {
{ 0x00000069, 0x01FF }, /* R105 - Always On Triggers Sequence Select 4 */
{ 0x0000006A, 0x01FF }, /* R106 - Always On Triggers Sequence Select 5 */
{ 0x0000006B, 0x01FF }, /* R107 - Always On Triggers Sequence Select 6 */
- { 0x0000006E, 0x01FF }, /* R110 - Trigger Sequence Select 32 */
- { 0x0000006F, 0x01FF }, /* R111 - Trigger Sequence Select 33 */
{ 0x00000090, 0x0000 }, /* R144 - Haptics Control 1 */
{ 0x00000091, 0x7FFF }, /* R145 - Haptics Control 2 */
{ 0x00000092, 0x0000 }, /* R146 - Haptics phase 1 intensity */
@@ -270,16 +268,13 @@ static const struct reg_default wm8998_reg_default[] = {
{ 0x0000021A, 0x01A6 }, /* R538 - Mic Bias Ctrl 3 */
{ 0x00000293, 0x0080 }, /* R659 - Accessory Detect Mode 1 */
{ 0x0000029B, 0x0000 }, /* R667 - Headphone Detect 1 */
- { 0x0000029C, 0x0000 }, /* R668 - Headphone Detect 2 */
{ 0x000002A2, 0x0000 }, /* R674 - Micd Clamp control */
{ 0x000002A3, 0x1102 }, /* R675 - Mic Detect 1 */
{ 0x000002A4, 0x009F }, /* R676 - Mic Detect 2 */
- { 0x000002A5, 0x0000 }, /* R677 - Mic Detect 3 */
{ 0x000002A6, 0x3737 }, /* R678 - Mic Detect Level 1 */
{ 0x000002A7, 0x2C37 }, /* R679 - Mic Detect Level 2 */
{ 0x000002A8, 0x1422 }, /* R680 - Mic Detect Level 3 */
{ 0x000002A9, 0x030A }, /* R681 - Mic Detect Level 4 */
- { 0x000002AB, 0x0000 }, /* R683 - Mic Detect 4 */
{ 0x000002CB, 0x0000 }, /* R715 - Isolation control */
{ 0x000002D3, 0x0000 }, /* R723 - Jack detect analogue */
{ 0x00000300, 0x0000 }, /* R768 - Input Enables */
@@ -707,13 +702,11 @@ static const struct reg_default wm8998_reg_default[] = {
{ 0x00000D1A, 0xFFFF }, /* R3354 - IRQ2 Status 3 Mask */
{ 0x00000D1B, 0xFFFF }, /* R3355 - IRQ2 Status 4 Mask */
{ 0x00000D1C, 0xFEFF }, /* R3356 - IRQ2 Status 5 Mask */
- { 0x00000D1D, 0xFFFF }, /* R3357 - IRQ2 Status 6 Mask */
{ 0x00000D1F, 0x0000 }, /* R3359 - IRQ2 Control */
{ 0x00000D53, 0xFFFF }, /* R3411 - AOD IRQ Mask IRQ1 */
{ 0x00000D54, 0xFFFF }, /* R3412 - AOD IRQ Mask IRQ2 */
{ 0x00000D56, 0x0000 }, /* R3414 - Jack detect debounce */
{ 0x00000E00, 0x0000 }, /* R3584 - FX_Ctrl1 */
- { 0x00000E01, 0x0000 }, /* R3585 - FX_Ctrl2 */
{ 0x00000E10, 0x6318 }, /* R3600 - EQ1_1 */
{ 0x00000E11, 0x6300 }, /* R3601 - EQ1_2 */
{ 0x00000E12, 0x0FC8 }, /* R3602 - EQ1_3 */
@@ -833,7 +826,6 @@ static bool wm8998_readable_register(struct device *dev, unsigned int reg)
switch (reg) {
case ARIZONA_SOFTWARE_RESET:
case ARIZONA_DEVICE_REVISION:
- case ARIZONA_CTRL_IF_SPI_CFG_1:
case ARIZONA_CTRL_IF_I2C1_CFG_1:
case ARIZONA_CTRL_IF_I2C1_CFG_2:
case ARIZONA_WRITE_SEQUENCER_CTRL_0:
--
1.7.2.5
next reply other threads:[~2015-09-09 9:02 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-09 8:39 Charles Keepax [this message]
2015-09-20 4:19 ` [PATCH] mfd: wm8998: Fixup register defaults/readables Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1441787970-30438-1-git-send-email-ckeepax@opensource.wolfsonmicro.com \
--to=ckeepax@opensource.wolfsonmicro.com \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.wolfsonmicro.com \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.