From: <gregkh@linuxfoundation.org>
To: torvalds@linux-foundation.org, gregkh@linuxfoundation.org,
luto@amacapital.net, mingo@kernel.org, stsp@list.ru
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "Revert x86 sigcontext cleanups" has been added to the 4.1-stable tree
Date: Thu, 10 Sep 2015 23:23:24 -0700 [thread overview]
Message-ID: <1441952604129173@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
Revert x86 sigcontext cleanups
to the 4.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
revert-x86-sigcontext-cleanups.patch
and it can be found in the queue-4.1 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From ed596cde9425509ec6ce88e19f03e9b13b6f518b Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Thu, 13 Aug 2015 08:25:20 -0700
Subject: Revert x86 sigcontext cleanups
From: Linus Torvalds <torvalds@linux-foundation.org>
commit ed596cde9425509ec6ce88e19f03e9b13b6f518b upstream.
This reverts commits 9a036b93a344 ("x86/signal/64: Remove 'fs' and 'gs'
from sigcontext") and c6f2062935c8 ("x86/signal/64: Fix SS handling for
signals delivered to 64-bit programs").
They were cleanups, but they break dosemu by changing the signal return
behavior (and removing 'fs' and 'gs' from the sigcontext struct - while
not actually changing any behavior - causes build problems).
Reported-and-tested-by: Stas Sergeev <stsp@list.ru>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/include/asm/sigcontext.h | 6 +++---
arch/x86/include/uapi/asm/sigcontext.h | 21 +++------------------
arch/x86/kernel/signal.c | 26 +++++++++++---------------
3 files changed, 17 insertions(+), 36 deletions(-)
--- a/arch/x86/include/asm/sigcontext.h
+++ b/arch/x86/include/asm/sigcontext.h
@@ -57,9 +57,9 @@ struct sigcontext {
unsigned long ip;
unsigned long flags;
unsigned short cs;
- unsigned short __pad2; /* Was called gs, but was always zero. */
- unsigned short __pad1; /* Was called fs, but was always zero. */
- unsigned short ss;
+ unsigned short gs;
+ unsigned short fs;
+ unsigned short __pad0;
unsigned long err;
unsigned long trapno;
unsigned long oldmask;
--- a/arch/x86/include/uapi/asm/sigcontext.h
+++ b/arch/x86/include/uapi/asm/sigcontext.h
@@ -177,24 +177,9 @@ struct sigcontext {
__u64 rip;
__u64 eflags; /* RFLAGS */
__u16 cs;
-
- /*
- * Prior to 2.5.64 ("[PATCH] x86-64 updates for 2.5.64-bk3"),
- * Linux saved and restored fs and gs in these slots. This
- * was counterproductive, as fsbase and gsbase were never
- * saved, so arch_prctl was presumably unreliable.
- *
- * If these slots are ever needed for any other purpose, there
- * is some risk that very old 64-bit binaries could get
- * confused. I doubt that many such binaries still work,
- * though, since the same patch in 2.5.64 also removed the
- * 64-bit set_thread_area syscall, so it appears that there is
- * no TLS API that works in both pre- and post-2.5.64 kernels.
- */
- __u16 __pad2; /* Was gs. */
- __u16 __pad1; /* Was fs. */
-
- __u16 ss;
+ __u16 gs;
+ __u16 fs;
+ __u16 __pad0;
__u64 err;
__u64 trapno;
__u64 oldmask;
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -93,8 +93,15 @@ int restore_sigcontext(struct pt_regs *r
COPY(r15);
#endif /* CONFIG_X86_64 */
+#ifdef CONFIG_X86_32
COPY_SEG_CPL3(cs);
COPY_SEG_CPL3(ss);
+#else /* !CONFIG_X86_32 */
+ /* Kernel saves and restores only the CS segment register on signals,
+ * which is the bare minimum needed to allow mixed 32/64-bit code.
+ * App's signal handler can save/restore other segments if needed. */
+ COPY_SEG_CPL3(cs);
+#endif /* CONFIG_X86_32 */
get_user_ex(tmpflags, &sc->flags);
regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS);
@@ -154,9 +161,8 @@ int setup_sigcontext(struct sigcontext _
#else /* !CONFIG_X86_32 */
put_user_ex(regs->flags, &sc->flags);
put_user_ex(regs->cs, &sc->cs);
- put_user_ex(0, &sc->__pad2);
- put_user_ex(0, &sc->__pad1);
- put_user_ex(regs->ss, &sc->ss);
+ put_user_ex(0, &sc->gs);
+ put_user_ex(0, &sc->fs);
#endif /* CONFIG_X86_32 */
put_user_ex(fpstate, &sc->fpstate);
@@ -450,19 +456,9 @@ static int __setup_rt_frame(int sig, str
regs->sp = (unsigned long)frame;
- /*
- * Set up the CS and SS registers to run signal handlers in
- * 64-bit mode, even if the handler happens to be interrupting
- * 32-bit or 16-bit code.
- *
- * SS is subtle. In 64-bit mode, we don't need any particular
- * SS descriptor, but we do need SS to be valid. It's possible
- * that the old SS is entirely bogus -- this can happen if the
- * signal we're trying to deliver is #GP or #SS caused by a bad
- * SS value.
- */
+ /* Set up the CS register to run signal handlers in 64-bit mode,
+ even if the handler happens to be interrupting 32-bit code. */
regs->cs = __USER_CS;
- regs->ss = __USER_DS;
return 0;
}
Patches currently in stable-queue which might be from torvalds@linux-foundation.org are
queue-4.1/mm-hwpoison-fix-fail-isolate-hugetlbfs-page-w-refcount-held.patch
queue-4.1/perf-fix-perf_event_ioc_period-migration-race.patch
queue-4.1/ipc-sem.c-update-correct-memory-barriers.patch
queue-4.1/ipc-sem-fix-use-after-free-on-ipc_rmid-after-a-task-using-same-semaphore-set-exits.patch
queue-4.1/perf-fix-fasync-handling-on-inherited-events.patch
queue-4.1/perf-fix-double-free-of-the-aux-buffer.patch
queue-4.1/revert-x86-sigcontext-cleanups.patch
queue-4.1/mm-hwpoison-fix-page-refcount-of-unknown-non-lru-page.patch
reply other threads:[~2015-09-11 6:23 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1441952604129173@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=luto@amacapital.net \
--cc=mingo@kernel.org \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=stsp@list.ru \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.