[PATCH v2 2/2] PCI: imx6: Add some defines for improving code readability

[Fabio Estevam <festevam@gmail.com>]

From: Fabio Estevam <fabio.estevam@freescale.com>

Instead of having some hardcoded values, it is preferred to use
defines when possible.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
Changes since v1:
- Make clear that the defines represent bitfields (Lucas)

 drivers/pci/host/pci-imx6.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
index 2d0d0fe..6f43086 100644
--- a/drivers/pci/host/pci-imx6.c
+++ b/drivers/pci/host/pci-imx6.c
@@ -55,6 +55,7 @@ struct imx6_pcie {
 #define PCIE_PL_PFLR_LINK_STATE_MASK		(0x3f << 16)
 #define PCIE_PL_PFLR_FORCE_LINK			(1 << 15)
 #define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28)
+#define PCIE_PHY_DEBUG_R0_LTSSM_MASK		(0x3f << 0)
 #define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c)
 #define PCIE_PHY_DEBUG_R1_XMLH_LINK_IN_TRAINING	(1 << 29)
 #define PCIE_PHY_DEBUG_R1_XMLH_LINK_UP		(1 << 4)
@@ -74,6 +75,7 @@ struct imx6_pcie {
 
 /* PHY registers (not memory-mapped) */
 #define PCIE_PHY_RX_ASIC_OUT 0x100D
+#define PCIE_PHY_RX_ASIC_OUT_VALID	(1 << 0)
 
 #define PHY_RX_OVRD_IN_LO 0x1005
 #define PHY_RX_OVRD_IN_LO_RX_DATA_EN (1 << 5)
@@ -503,10 +505,10 @@ static int imx6_pcie_link_up(struct pcie_port *pp)
 	pcie_phy_read(pp->dbi_base, PCIE_PHY_RX_ASIC_OUT, &rx_valid);
 	debug_r0 = readl(pp->dbi_base + PCIE_PHY_DEBUG_R0);
 
-	if (rx_valid & 0x01)
+	if (rx_valid & PCIE_PHY_RX_ASIC_OUT_VALID)
 		return 0;
 
-	if ((debug_r0 & 0x3f) != 0x0d)
+	if ((debug_r0 & PCIE_PHY_DEBUG_R0_LTSSM_MASK) != 0x0d)
 		return 0;
 
 	dev_err(pp->dev, "transition to gen2 is stuck, reset PHY!\n");
-- 
1.9.1