Re: [PATCH v3] powerpc32: memset: only use dcbz once cache is enabled

[Scott Wood <scottwood@freescale.com>]

On Mon, 2015-09-14 at 17:44 +0200, Christophe LEROY wrote:
> Le 14/09/2015 17:20, Scott Wood a écrit :
> > On Mon, 2015-09-14 at 08:21 +0200, Christophe Leroy wrote:
> > > memset() uses instruction dcbz to speed up clearing by not wasting time
> > > loading cache line with data that will be overwritten.
> > > Some platform like mpc52xx do no have cache active at startup and
> > > can therefore not use memset(). Allthough no part of the code
> > > explicitly uses memset(), GCC may makes calls to it.
> > > 
> > > This patch modifies memset() such that at startup, memset()
> > > unconditionally jumps to simple_memset() which doesn't use
> > > the dcbz instruction.
> > > 
> > > Once the initial MMU is set up, in machine_init() we patch memset()
> > > by replacing this inconditional jump by a NOP
> > > 
> > > Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
> > > ---
> > > This patch goes on to of [v3] powerpc32: memcpy: only use dcbz once 
> > > cache
> > > is enabled
> > > 
> > > Changes in v2:
> > >     was part of [v2] powerpc32: memcpy/memset: only use dcbz once cache 
> > > is
> > > enabled
> > > changes in v3:
> > >    Not using anymore feature-fixups
> > >    Handling of memcpy() and memset() split in two patches
> > >    
> > >   arch/powerpc/kernel/setup_32.c |  1 +
> > >   arch/powerpc/lib/copy_32.S     | 15 +++++++++++++++
> > >   2 files changed, 16 insertions(+)
> > > 
> > > diff --git a/arch/powerpc/kernel/setup_32.c 
> > > b/arch/powerpc/kernel/setup_32.c
> > > index 362495f..345ec3a 100644
> > > --- a/arch/powerpc/kernel/setup_32.c
> > > +++ b/arch/powerpc/kernel/setup_32.c
> > > @@ -124,6 +124,7 @@ notrace void __init machine_init(u64 dt_ptr)
> > >        udbg_early_init();
> > >   
> > >        patch_instruction((unsigned int *)&memcpy, PPC_INST_NOP);
> > > +     patch_instruction((unsigned int *)&memset, PPC_INST_NOP);
> > >   
> > >        /* Do some early initialization based on the flat device tree */
> > >        early_init_devtree(__va(dt_ptr));
> > > diff --git a/arch/powerpc/lib/copy_32.S b/arch/powerpc/lib/copy_32.S
> > > index da5847d..68a59d4 100644
> > > --- a/arch/powerpc/lib/copy_32.S
> > > +++ b/arch/powerpc/lib/copy_32.S
> > > @@ -73,8 +73,13 @@ CACHELINE_MASK = (L1_CACHE_BYTES-1)
> > >    * Use dcbz on the complete cache lines in the destination
> > >    * to set them to zero.  This requires that the destination
> > >    * area is cacheable.  -- paulus
> > > + *
> > > + * During early init, cache might not be active yet, so dcbz cannot be
> > > used.
> > > + * We therefore jump to simple_memset which doesn't use dcbz. This 
> > > jump is
> > > + * replaced by a nop once cache is active. This is done in 
> > > machine_init()
> > >    */
> > >   _GLOBAL(memset)
> > > +     b       simple_memset
> > >        rlwimi  r4,r4,8,16,23
> > >        rlwimi  r4,r4,16,0,15
> > >   
> > > @@ -122,6 +127,16 @@ _GLOBAL(memset)
> > >        bdnz    8b
> > >        blr
> > >   
> > > +/* Simple version of memset used during early boot until cache is 
> > > enabled
> > > */
> > > +simple_memset:
> > > +     cmplwi  cr0,r5,0
> > > +     addi    r6,r3,-1
> > > +     beqlr
> > > +     mtctr   r5
> > > +1:   stbu    r4,1(r6)
> > > +     bdnz    1b
> > > +     blr
> > Instead couldn't you use the generic memset at label 2: and patch the "bne
> > 2f"?
> 
> Yes I could but it means adding a global symbol there at the "bne 2f". I 
> thought it was what Michael didn't like in my v1 of memcpy().
> What name could I give to that symbol ? Something like 
> memcpy_nocache_patch: ?
> What would be the best ? Having b 2f, and replacing it with bne 2f ? Or 
> have b 2f just above and replace it by nop once cache is up ?

I'm not sure why a global symbol for an instruction to be patched would be a 
big deal (similar to kvm_emul.S)...  I thought Michael just wanted existing 
infrastructure to be used if it's practical to do so.

-Scott