[PATCH 7/9] extcon: arizona: Ignore jd_invert for MICD_CLAMP_STS

[Charles Keepax <ckeepax@opensource.wolfsonmicro.com>]

From: Nariman Poushin <nariman@opensource.wolfsonmicro.com>

The polarity of MICD_CLAMP_STS does not change when different clamp
modes are used, this patch corrects this issue.

Signed-off-by: Nariman Poushin <nariman@opensource.wolfsonmicro.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
---
 drivers/extcon/extcon-arizona.c |    5 +----
 1 files changed, 1 insertions(+), 4 deletions(-)

diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index 6d35147b..ece5892 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -1059,10 +1059,7 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
 
 	if (arizona->pdata.jd_gpio5) {
 		mask = ARIZONA_MICD_CLAMP_STS;
-		if (arizona->pdata.jd_invert)
-			present = ARIZONA_MICD_CLAMP_STS;
-		else
-			present = 0;
+		present = 0;
 	} else {
 		mask = ARIZONA_JD1_STS;
 		if (arizona->pdata.jd_invert)
-- 
1.7.2.5