All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Benoît Thébaudeau" <benoit@wsystem.com>
To: alsa-devel@alsa-project.org
Cc: "Nicolin Chen" <nicoleotsuka@gmail.com>,
	"Timur Tabi" <timur@tabi.org>,
	"Benoît Thébaudeau" <benoit@wsystem.com>,
	"Xiubo Li" <Xiubo.Lee@gmail.com>
Subject: [PATCH] ASoC: imx-ssi: Fix DAI hardware signal inversions
Date: Thu, 17 Sep 2015 17:46:54 +0200	[thread overview]
Message-ID: <1442504814-16965-1-git-send-email-benoit@wsystem.com> (raw)

SND_SOC_DAIFMT_{IB|NB}_{IF|NF} are defined as inverting or not BCLK or
FRM relatively to what is standard for the specified DAI hardware audio
format. Consequently, the absolute polarities of these signals cannot be
derived only from these settings as this driver did. The format has to
be taken into account too.

This fixes inverted left/right channels in I²S mode.

Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
---
 sound/soc/fsl/imx-ssi.c | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)

diff --git a/sound/soc/fsl/imx-ssi.c b/sound/soc/fsl/imx-ssi.c
index 48b2d24..b95132e 100644
--- a/sound/soc/fsl/imx-ssi.c
+++ b/sound/soc/fsl/imx-ssi.c
@@ -95,7 +95,8 @@ static int imx_ssi_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt)
 	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
 	case SND_SOC_DAIFMT_I2S:
 		/* data on rising edge of bclk, frame low 1clk before data */
-		strcr |= SSI_STCR_TFSI | SSI_STCR_TEFS | SSI_STCR_TXBIT0;
+		strcr |= SSI_STCR_TXBIT0 | SSI_STCR_TSCKP | SSI_STCR_TFSI |
+			SSI_STCR_TEFS;
 		scr |= SSI_SCR_NET;
 		if (ssi->flags & IMX_SSI_USE_I2S_SLAVE) {
 			scr &= ~SSI_I2S_MODE_MASK;
@@ -104,33 +105,31 @@ static int imx_ssi_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt)
 		break;
 	case SND_SOC_DAIFMT_LEFT_J:
 		/* data on rising edge of bclk, frame high with data */
-		strcr |= SSI_STCR_TXBIT0;
+		strcr |= SSI_STCR_TXBIT0 | SSI_STCR_TSCKP;
 		break;
 	case SND_SOC_DAIFMT_DSP_B:
 		/* data on rising edge of bclk, frame high with data */
-		strcr |= SSI_STCR_TFSL | SSI_STCR_TXBIT0;
+		strcr |= SSI_STCR_TXBIT0 | SSI_STCR_TSCKP | SSI_STCR_TFSL;
 		break;
 	case SND_SOC_DAIFMT_DSP_A:
 		/* data on rising edge of bclk, frame high 1clk before data */
-		strcr |= SSI_STCR_TFSL | SSI_STCR_TXBIT0 | SSI_STCR_TEFS;
+		strcr |= SSI_STCR_TXBIT0 | SSI_STCR_TSCKP | SSI_STCR_TFSL |
+			SSI_STCR_TEFS;
 		break;
 	}
 
 	/* DAI clock inversion */
 	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
 	case SND_SOC_DAIFMT_IB_IF:
-		strcr |= SSI_STCR_TFSI;
-		strcr &= ~SSI_STCR_TSCKP;
+		strcr ^= SSI_STCR_TSCKP | SSI_STCR_TFSI;
 		break;
 	case SND_SOC_DAIFMT_IB_NF:
-		strcr &= ~(SSI_STCR_TSCKP | SSI_STCR_TFSI);
+		strcr ^= SSI_STCR_TSCKP;
 		break;
 	case SND_SOC_DAIFMT_NB_IF:
-		strcr |= SSI_STCR_TFSI | SSI_STCR_TSCKP;
+		strcr ^= SSI_STCR_TFSI;
 		break;
 	case SND_SOC_DAIFMT_NB_NF:
-		strcr &= ~SSI_STCR_TFSI;
-		strcr |= SSI_STCR_TSCKP;
 		break;
 	}
 
-- 
2.1.4

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

             reply	other threads:[~2015-09-17 15:47 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-17 15:46 Benoît Thébaudeau [this message]
2015-09-17 17:59 ` [PATCH] ASoC: imx-ssi: Fix DAI hardware signal inversions Nicolin Chen
2015-09-19  0:51   ` undefined
2015-09-28 19:36   ` Benoît Thébaudeau
2015-09-29 15:35     ` Mark Brown
2015-09-29 15:59       ` [PATCH][RESEND] " Benoît Thébaudeau
2015-09-30 19:32 ` Applied "ASoC: imx-ssi: Fix DAI hardware signal inversions" to the asoc tree Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1442504814-16965-1-git-send-email-benoit@wsystem.com \
    --to=benoit@wsystem.com \
    --cc=Xiubo.Lee@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=nicoleotsuka@gmail.com \
    --cc=timur@tabi.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.