From: <gregkh@linuxfoundation.org>
To: benoar@dolka.fr, dv@vollmann.ch, gregkh@linuxfoundation.org,
gregory.clement@free-electrons.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "ARM: orion5x: fix legacy orion5x IRQ numbers" has been added to the 4.2-stable tree
Date: Fri, 18 Sep 2015 20:34:02 -0700 [thread overview]
Message-ID: <1442633642156182@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
ARM: orion5x: fix legacy orion5x IRQ numbers
to the 4.2-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm-orion5x-fix-legacy-orion5x-irq-numbers.patch
and it can be found in the queue-4.2 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From 5be9fc23cdb42e1d383ecc8eae8a8ff70a752708 Mon Sep 17 00:00:00 2001
From: Benjamin Cama <benoar@dolka.fr>
Date: Tue, 14 Jul 2015 16:25:58 +0200
Subject: ARM: orion5x: fix legacy orion5x IRQ numbers
From: Benjamin Cama <benoar@dolka.fr>
commit 5be9fc23cdb42e1d383ecc8eae8a8ff70a752708 upstream.
Since v3.18, attempts to deliver IRQ0 are rejected, breaking orion5x.
Fix this by increasing all interrupts by one, as did 5d6bed2a9c8b for
dove. Also, force MULTI_IRQ_HANDLER for all orion platforms (including
dove) as the specific handler is needed to shift back IRQ numbers by
one.
[gregory.clement@free-electrons.com]: moved the select
MULTI_IRQ_HANDLER from PLAT_ORION_LEGACY to ARCH_ORION5X as it broke
the build for dove.
Fixes: a71b092a9c68 ("ARM: Convert handle_IRQ to use __handle_domain_irq")
Signed-off-by: Benjamin Cama <benoar@dolka.fr>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Detlef Vollmann <dv@vollmann.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/Kconfig | 1
arch/arm/mach-orion5x/include/mach/irqs.h | 64 +++++++++++++++---------------
arch/arm/mach-orion5x/irq.c | 4 -
3 files changed, 35 insertions(+), 34 deletions(-)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -536,6 +536,7 @@ config ARCH_ORION5X
select MVEBU_MBUS
select PCI
select PLAT_ORION_LEGACY
+ select MULTI_IRQ_HANDLER
help
Support for the following Marvell Orion 5x series SoCs:
Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
--- a/arch/arm/mach-orion5x/include/mach/irqs.h
+++ b/arch/arm/mach-orion5x/include/mach/irqs.h
@@ -16,42 +16,42 @@
/*
* Orion Main Interrupt Controller
*/
-#define IRQ_ORION5X_BRIDGE 0
-#define IRQ_ORION5X_DOORBELL_H2C 1
-#define IRQ_ORION5X_DOORBELL_C2H 2
-#define IRQ_ORION5X_UART0 3
-#define IRQ_ORION5X_UART1 4
-#define IRQ_ORION5X_I2C 5
-#define IRQ_ORION5X_GPIO_0_7 6
-#define IRQ_ORION5X_GPIO_8_15 7
-#define IRQ_ORION5X_GPIO_16_23 8
-#define IRQ_ORION5X_GPIO_24_31 9
-#define IRQ_ORION5X_PCIE0_ERR 10
-#define IRQ_ORION5X_PCIE0_INT 11
-#define IRQ_ORION5X_USB1_CTRL 12
-#define IRQ_ORION5X_DEV_BUS_ERR 14
-#define IRQ_ORION5X_PCI_ERR 15
-#define IRQ_ORION5X_USB_BR_ERR 16
-#define IRQ_ORION5X_USB0_CTRL 17
-#define IRQ_ORION5X_ETH_RX 18
-#define IRQ_ORION5X_ETH_TX 19
-#define IRQ_ORION5X_ETH_MISC 20
-#define IRQ_ORION5X_ETH_SUM 21
-#define IRQ_ORION5X_ETH_ERR 22
-#define IRQ_ORION5X_IDMA_ERR 23
-#define IRQ_ORION5X_IDMA_0 24
-#define IRQ_ORION5X_IDMA_1 25
-#define IRQ_ORION5X_IDMA_2 26
-#define IRQ_ORION5X_IDMA_3 27
-#define IRQ_ORION5X_CESA 28
-#define IRQ_ORION5X_SATA 29
-#define IRQ_ORION5X_XOR0 30
-#define IRQ_ORION5X_XOR1 31
+#define IRQ_ORION5X_BRIDGE (1 + 0)
+#define IRQ_ORION5X_DOORBELL_H2C (1 + 1)
+#define IRQ_ORION5X_DOORBELL_C2H (1 + 2)
+#define IRQ_ORION5X_UART0 (1 + 3)
+#define IRQ_ORION5X_UART1 (1 + 4)
+#define IRQ_ORION5X_I2C (1 + 5)
+#define IRQ_ORION5X_GPIO_0_7 (1 + 6)
+#define IRQ_ORION5X_GPIO_8_15 (1 + 7)
+#define IRQ_ORION5X_GPIO_16_23 (1 + 8)
+#define IRQ_ORION5X_GPIO_24_31 (1 + 9)
+#define IRQ_ORION5X_PCIE0_ERR (1 + 10)
+#define IRQ_ORION5X_PCIE0_INT (1 + 11)
+#define IRQ_ORION5X_USB1_CTRL (1 + 12)
+#define IRQ_ORION5X_DEV_BUS_ERR (1 + 14)
+#define IRQ_ORION5X_PCI_ERR (1 + 15)
+#define IRQ_ORION5X_USB_BR_ERR (1 + 16)
+#define IRQ_ORION5X_USB0_CTRL (1 + 17)
+#define IRQ_ORION5X_ETH_RX (1 + 18)
+#define IRQ_ORION5X_ETH_TX (1 + 19)
+#define IRQ_ORION5X_ETH_MISC (1 + 20)
+#define IRQ_ORION5X_ETH_SUM (1 + 21)
+#define IRQ_ORION5X_ETH_ERR (1 + 22)
+#define IRQ_ORION5X_IDMA_ERR (1 + 23)
+#define IRQ_ORION5X_IDMA_0 (1 + 24)
+#define IRQ_ORION5X_IDMA_1 (1 + 25)
+#define IRQ_ORION5X_IDMA_2 (1 + 26)
+#define IRQ_ORION5X_IDMA_3 (1 + 27)
+#define IRQ_ORION5X_CESA (1 + 28)
+#define IRQ_ORION5X_SATA (1 + 29)
+#define IRQ_ORION5X_XOR0 (1 + 30)
+#define IRQ_ORION5X_XOR1 (1 + 31)
/*
* Orion General Purpose Pins
*/
-#define IRQ_ORION5X_GPIO_START 32
+#define IRQ_ORION5X_GPIO_START 33
#define NR_GPIO_IRQS 32
#define NR_IRQS (IRQ_ORION5X_GPIO_START + NR_GPIO_IRQS)
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -42,7 +42,7 @@ __exception_irq_entry orion5x_legacy_han
stat = readl_relaxed(MAIN_IRQ_CAUSE);
stat &= readl_relaxed(MAIN_IRQ_MASK);
if (stat) {
- unsigned int hwirq = __fls(stat);
+ unsigned int hwirq = 1 + __fls(stat);
handle_IRQ(hwirq, regs);
return;
}
@@ -51,7 +51,7 @@ __exception_irq_entry orion5x_legacy_han
void __init orion5x_init_irq(void)
{
- orion_irq_init(0, MAIN_IRQ_MASK);
+ orion_irq_init(1, MAIN_IRQ_MASK);
#ifdef CONFIG_MULTI_IRQ_HANDLER
set_handle_irq(orion5x_legacy_handle_irq);
Patches currently in stable-queue which might be from benoar@dolka.fr are
queue-4.2/arm-orion5x-fix-legacy-orion5x-irq-numbers.patch
reply other threads:[~2015-09-19 5:00 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1442633642156182@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=benoar@dolka.fr \
--cc=dv@vollmann.ch \
--cc=gregory.clement@free-electrons.com \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.