From: Daniel J Blueman <daniel@numascale.com>
To: Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>, "H. Peter Anvin" <hpa@zytor.com>
Cc: Daniel J Blueman <daniel@numascale.com>, <x86@kernel.org>,
<linux-kernel@vger.kernel.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Steffen Persvold <sp@numascale.com>
Subject: [PATCH 2/4] x86: Add Numachip2 APIC support
Date: Mon, 21 Sep 2015 01:02:00 +0800 [thread overview]
Message-ID: <1442768522-19217-2-git-send-email-daniel@numascale.com> (raw)
In-Reply-To: <1442768522-19217-1-git-send-email-daniel@numascale.com>
Introduce support for Numachip2 remote interrupts via detecting the right
ACPI SRAT signature.
Access is performed via a fixed mapping in the x86 physical address space.
Signed-off-by: Daniel J Blueman <daniel@numascale.com>
Acked-by: Steffen Persvold <sp@numascale.com>
---
arch/x86/include/asm/numachip/numachip.h | 1 +
arch/x86/include/asm/numachip/numachip_csr.h | 34 ++++++++++
arch/x86/kernel/apic/apic_numachip.c | 93 ++++++++++++++++++++++++++++
3 files changed, 128 insertions(+)
diff --git a/arch/x86/include/asm/numachip/numachip.h b/arch/x86/include/asm/numachip/numachip.h
index 1c6f7f6..c64373a 100644
--- a/arch/x86/include/asm/numachip/numachip.h
+++ b/arch/x86/include/asm/numachip/numachip.h
@@ -14,6 +14,7 @@
#ifndef _ASM_X86_NUMACHIP_NUMACHIP_H
#define _ASM_X86_NUMACHIP_NUMACHIP_H
+extern u8 numachip_system;
extern int __init pci_numachip_init(void);
#endif /* _ASM_X86_NUMACHIP_NUMACHIP_H */
diff --git a/arch/x86/include/asm/numachip/numachip_csr.h b/arch/x86/include/asm/numachip/numachip_csr.h
index 7469b13..c7efc25 100644
--- a/arch/x86/include/asm/numachip/numachip_csr.h
+++ b/arch/x86/include/asm/numachip/numachip_csr.h
@@ -14,6 +14,7 @@
#ifndef _ASM_X86_NUMACHIP_NUMACHIP_CSR_H
#define _ASM_X86_NUMACHIP_NUMACHIP_CSR_H
+#include <linux/smp.h>
#include <linux/io.h>
#define CSR_NODE_SHIFT 16
@@ -50,4 +51,38 @@ static inline void write_lcsr(unsigned long offset, unsigned int val)
writel(swab32(val), lcsr_address(offset));
}
+/*
+ * On NumaChip2, local CSR space is 16MB and starts at fixed offset below 4G
+ */
+
+#define NUMACHIP2_LCSR_BASE 0xf0000000UL
+#define NUMACHIP2_LCSR_SIZE 0x1000000UL
+#define NUMACHIP2_APIC_ICR 0x100000
+
+static inline void __iomem *numachip2_lcsr_address(unsigned long offset)
+{
+ return (void __iomem *)__va(NUMACHIP2_LCSR_BASE |
+ (offset & (NUMACHIP2_LCSR_SIZE - 1)));
+}
+
+static inline u32 numachip2_read32_lcsr(unsigned long offset)
+{
+ return readl(numachip2_lcsr_address(offset));
+}
+
+static inline u64 numachip2_read64_lcsr(unsigned long offset)
+{
+ return readq(numachip2_lcsr_address(offset));
+}
+
+static inline void numachip2_write32_lcsr(unsigned long offset, u32 val)
+{
+ writel(val, numachip2_lcsr_address(offset));
+}
+
+static inline void numachip2_write64_lcsr(unsigned long offset, u64 val)
+{
+ writeq(val, numachip2_lcsr_address(offset));
+}
+
#endif /* _ASM_X86_NUMACHIP_NUMACHIP_CSR_H */
diff --git a/arch/x86/kernel/apic/apic_numachip.c b/arch/x86/kernel/apic/apic_numachip.c
index 8729249..dfe2b1c 100644
--- a/arch/x86/kernel/apic/apic_numachip.c
+++ b/arch/x86/kernel/apic/apic_numachip.c
@@ -22,6 +22,7 @@
u8 numachip_system __read_mostly;
static const struct apic apic_numachip1;
+static const struct apic apic_numachip2;
static void (*numachip_apic_icr_write)(int apicid, unsigned int val) __read_mostly;
static unsigned int numachip1_get_apic_id(unsigned long x)
@@ -45,6 +46,19 @@ static unsigned long numachip1_set_apic_id(unsigned int id)
return x;
}
+static unsigned int numachip2_get_apic_id(unsigned long x)
+{
+ u64 mcfg;
+
+ rdmsrl(MSR_FAM10H_MMIO_CONF_BASE, mcfg);
+ return ((mcfg >> (28 - 8)) & 0xfff00) | (x >> 24);
+}
+
+static unsigned long numachip2_set_apic_id(unsigned int id)
+{
+ return id << 24;
+}
+
static int numachip_apic_id_valid(int apicid)
{
/* Trust what bootloader passes in MADT */
@@ -66,6 +80,11 @@ static void numachip1_apic_icr_write(int apicid, unsigned int val)
write_lcsr(CSR_G3_EXT_IRQ_GEN, (apicid << 16) | val);
}
+static void numachip2_apic_icr_write(int apicid, unsigned int val)
+{
+ numachip2_write32_lcsr(NUMACHIP2_APIC_ICR, (apicid << 12) | val);
+}
+
static int numachip_wakeup_secondary(int phys_apicid, unsigned long start_rip)
{
numachip_apic_icr_write(phys_apicid, APIC_DM_INIT);
@@ -129,6 +148,11 @@ static int __init numachip1_probe(void)
return apic == &apic_numachip1;
}
+static int __init numachip2_probe(void)
+{
+ return apic == &apic_numachip2;
+}
+
static void fixup_cpu_id(struct cpuinfo_x86 *c, int node)
{
u64 val;
@@ -154,6 +178,13 @@ static int __init numachip_system_init(void)
numachip_apic_icr_write = numachip1_apic_icr_write;
x86_init.pci.arch_init = pci_numachip_init;
break;
+ case 2:
+ init_extra_mapping_uc(NUMACHIP2_LCSR_BASE, NUMACHIP2_LCSR_SIZE);
+ numachip_apic_icr_write = numachip2_apic_icr_write;
+
+ /* Use MCFG config cycles rather than locked CF8 cycles */
+ raw_pci_ops = &pci_mmcfg;
+ break;
default:
return 0;
}
@@ -175,6 +206,17 @@ static int numachip1_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
return 1;
}
+static int numachip2_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+ if ((strncmp(oem_id, "NUMASC", 6) != 0) ||
+ (strncmp(oem_table_id, "NCONECT2", 8) != 0))
+ return 0;
+
+ numachip_system = 2;
+
+ return 1;
+}
+
static const struct apic apic_numachip1 __refconst = {
.name = "NumaConnect system",
.probe = numachip1_probe,
@@ -225,3 +267,54 @@ static const struct apic apic_numachip1 __refconst = {
};
apic_driver(apic_numachip1);
+
+static const struct apic apic_numachip2 __refconst = {
+ .name = "NumaConnect2 system",
+ .probe = numachip2_probe,
+ .acpi_madt_oem_check = numachip2_acpi_madt_oem_check,
+ .apic_id_valid = numachip_apic_id_valid,
+ .apic_id_registered = numachip_apic_id_registered,
+
+ .irq_delivery_mode = dest_Fixed,
+ .irq_dest_mode = 0, /* physical */
+
+ .target_cpus = online_target_cpus,
+ .disable_esr = 0,
+ .dest_logical = 0,
+ .check_apicid_used = NULL,
+
+ .vector_allocation_domain = default_vector_allocation_domain,
+ .init_apic_ldr = flat_init_apic_ldr,
+
+ .ioapic_phys_id_map = NULL,
+ .setup_apic_routing = NULL,
+ .cpu_present_to_apicid = default_cpu_present_to_apicid,
+ .apicid_to_cpu_present = NULL,
+ .check_phys_apicid_present = default_check_phys_apicid_present,
+ .phys_pkg_id = numachip_phys_pkg_id,
+
+ .get_apic_id = numachip2_get_apic_id,
+ .set_apic_id = numachip2_set_apic_id,
+ .apic_id_mask = 0xffU << 24,
+
+ .cpu_mask_to_apicid_and = default_cpu_mask_to_apicid_and,
+
+ .send_IPI_mask = numachip_send_IPI_mask,
+ .send_IPI_mask_allbutself = numachip_send_IPI_mask_allbutself,
+ .send_IPI_allbutself = numachip_send_IPI_allbutself,
+ .send_IPI_all = numachip_send_IPI_all,
+ .send_IPI_self = numachip_send_IPI_self,
+
+ .wakeup_secondary_cpu = numachip_wakeup_secondary,
+ .inquire_remote_apic = NULL, /* REMRD not supported */
+
+ .read = native_apic_mem_read,
+ .write = native_apic_mem_write,
+ .eoi_write = native_apic_mem_write,
+ .icr_read = native_apic_icr_read,
+ .icr_write = native_apic_icr_write,
+ .wait_icr_idle = native_apic_wait_icr_idle,
+ .safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
+};
+
+apic_driver(apic_numachip2);
--
2.5.0
next prev parent reply other threads:[~2015-09-20 17:17 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-20 17:01 [PATCH 1/4] x86: Cleanup Numachip support Daniel J Blueman
2015-09-20 17:02 ` Daniel J Blueman [this message]
2015-09-22 20:33 ` [tip:x86/apic] x86/numachip: Add Numachip2 APIC support tip-bot for Daniel J Blueman
2015-09-20 17:02 ` [PATCH 3/4] x86: Add Numachip IPI optimisations Daniel J Blueman
2015-09-22 20:34 ` [tip:x86/apic] x86/numachip: " tip-bot for Daniel J Blueman
2015-09-20 17:02 ` [PATCH 4/4] x86: Introduce Numachip2 timer mechanisms Daniel J Blueman
2015-09-21 10:02 ` [PATCH v2] " Daniel J Blueman
2015-09-22 20:34 ` [tip:x86/apic] x86/numachip: " tip-bot for Daniel J Blueman
2015-09-22 20:33 ` [tip:x86/apic] x86/numachip: Cleanup Numachip support tip-bot for Daniel J Blueman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1442768522-19217-2-git-send-email-daniel@numascale.com \
--to=daniel@numascale.com \
--cc=daniel.lezcano@linaro.org \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=sp@numascale.com \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.