From: Ondrej Zary <linux@rainbow-software.org>
To: linux-wireless@vger.kernel.org
Cc: Dan Williams <dcbw@redhat.com>,
netdev@vger.kernel.org,
Kernel development list <linux-kernel@vger.kernel.org>
Subject: [PATCH v3 1/2] airo: fix IW_AUTH_ALG_OPEN_SYSTEM
Date: Mon, 21 Sep 2015 15:44:24 +0200 [thread overview]
Message-ID: <1442843065-30234-1-git-send-email-linux@rainbow-software.org> (raw)
IW_AUTH_ALG_OPEN_SYSTEM is ambiguous in set_auth for WEP as
wpa_supplicant uses it for both no encryption and WEP open system.
Cache the last mode set (only of these two) and use it here.
This allows wpa_supplicant to work with unencrypted APs.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
---
drivers/net/wireless/airo.c | 59 +++++++++++++++++++++++++------------------
1 file changed, 35 insertions(+), 24 deletions(-)
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index d0c97c2..67001a8 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -1237,6 +1237,7 @@ struct airo_info {
int wep_capable;
int max_wep_idx;
+ int last_auth;
/* WPA-related stuff */
unsigned int bssListFirst;
@@ -3786,6 +3787,16 @@ badrx:
}
}
+static inline void set_auth_type(struct airo_info *local, int auth_type)
+{
+ local->config.authType = auth_type;
+ /* Cache the last auth type used (of AUTH_OPEN and AUTH_ENCRYPT).
+ * Used by airo_set_auth()
+ */
+ if (auth_type == AUTH_OPEN || auth_type == AUTH_ENCRYPT)
+ local->last_auth = auth_type;
+}
+
static u16 setup_card(struct airo_info *ai, u8 *mac, int lock)
{
Cmd cmd;
@@ -3862,7 +3873,7 @@ static u16 setup_card(struct airo_info *ai, u8 *mac, int lock)
"level scale");
}
ai->config.opmode = adhoc ? MODE_STA_IBSS : MODE_STA_ESS;
- ai->config.authType = AUTH_OPEN;
+ set_auth_type(ai, AUTH_OPEN);
ai->config.modulation = MOD_CCK;
if (le16_to_cpu(cap_rid.len) >= sizeof(cap_rid) &&
@@ -4880,13 +4891,13 @@ static void proc_config_on_close(struct inode *inode, struct file *file)
line += 5;
switch( line[0] ) {
case 's':
- ai->config.authType = AUTH_SHAREDKEY;
+ set_auth_type(ai, AUTH_SHAREDKEY);
break;
case 'e':
- ai->config.authType = AUTH_ENCRYPT;
+ set_auth_type(ai, AUTH_ENCRYPT);
break;
default:
- ai->config.authType = AUTH_OPEN;
+ set_auth_type(ai, AUTH_OPEN);
break;
}
set_bit (FLAG_COMMIT, &ai->flags);
@@ -6368,9 +6379,8 @@ static int airo_set_encode(struct net_device *dev,
* should be enabled (user may turn it off later)
* This is also how "iwconfig ethX key on" works */
if((index == current_index) && (key.len > 0) &&
- (local->config.authType == AUTH_OPEN)) {
- local->config.authType = AUTH_ENCRYPT;
- }
+ (local->config.authType == AUTH_OPEN))
+ set_auth_type(local, AUTH_ENCRYPT);
} else {
/* Do we want to just set the transmit key index ? */
int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
@@ -6389,12 +6399,12 @@ static int airo_set_encode(struct net_device *dev,
}
}
/* Read the flags */
- if(dwrq->flags & IW_ENCODE_DISABLED)
- local->config.authType = AUTH_OPEN; // disable encryption
+ if (dwrq->flags & IW_ENCODE_DISABLED)
+ set_auth_type(local, AUTH_OPEN); /* disable encryption */
if(dwrq->flags & IW_ENCODE_RESTRICTED)
- local->config.authType = AUTH_SHAREDKEY; // Only Both
- if(dwrq->flags & IW_ENCODE_OPEN)
- local->config.authType = AUTH_ENCRYPT; // Only Wep
+ set_auth_type(local, AUTH_SHAREDKEY); /* Only Both */
+ if (dwrq->flags & IW_ENCODE_OPEN)
+ set_auth_type(local, AUTH_ENCRYPT); /* Only Wep */
/* Commit the changes to flags if needed */
if (local->config.authType != currentAuthType)
set_bit (FLAG_COMMIT, &local->flags);
@@ -6549,12 +6559,12 @@ static int airo_set_encodeext(struct net_device *dev,
}
/* Read the flags */
- if(encoding->flags & IW_ENCODE_DISABLED)
- local->config.authType = AUTH_OPEN; // disable encryption
+ if (encoding->flags & IW_ENCODE_DISABLED)
+ set_auth_type(local, AUTH_OPEN); /* disable encryption */
if(encoding->flags & IW_ENCODE_RESTRICTED)
- local->config.authType = AUTH_SHAREDKEY; // Only Both
- if(encoding->flags & IW_ENCODE_OPEN)
- local->config.authType = AUTH_ENCRYPT; // Only Wep
+ set_auth_type(local, AUTH_SHAREDKEY); /* Only Both */
+ if (encoding->flags & IW_ENCODE_OPEN)
+ set_auth_type(local, AUTH_ENCRYPT);
/* Commit the changes to flags if needed */
if (local->config.authType != currentAuthType)
set_bit (FLAG_COMMIT, &local->flags);
@@ -6659,9 +6669,9 @@ static int airo_set_auth(struct net_device *dev,
if (param->value) {
/* Only change auth type if unencrypted */
if (currentAuthType == AUTH_OPEN)
- local->config.authType = AUTH_ENCRYPT;
+ set_auth_type(local, AUTH_ENCRYPT);
} else {
- local->config.authType = AUTH_OPEN;
+ set_auth_type(local, AUTH_OPEN);
}
/* Commit the changes to flags if needed */
@@ -6670,13 +6680,14 @@ static int airo_set_auth(struct net_device *dev,
break;
case IW_AUTH_80211_AUTH_ALG: {
- /* FIXME: What about AUTH_OPEN? This API seems to
- * disallow setting our auth to AUTH_OPEN.
- */
if (param->value & IW_AUTH_ALG_SHARED_KEY) {
- local->config.authType = AUTH_SHAREDKEY;
+ set_auth_type(local, AUTH_SHAREDKEY);
} else if (param->value & IW_AUTH_ALG_OPEN_SYSTEM) {
- local->config.authType = AUTH_ENCRYPT;
+ /* We don't know here if WEP open system or
+ * unencrypted mode was requested - so use the
+ * last mode (of these two) used last time
+ */
+ set_auth_type(local, local->last_auth);
} else
return -EINVAL;
--
Ondrej Zary
next reply other threads:[~2015-09-21 14:15 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-21 13:44 Ondrej Zary [this message]
2015-09-21 13:44 ` [PATCH v3 2/2] airo: Implement netif_carrier_on/off Ondrej Zary
2015-09-21 16:22 ` [PATCH v3 1/2] airo: fix IW_AUTH_ALG_OPEN_SYSTEM Dan Williams
2015-09-21 16:22 ` Dan Williams
2015-09-29 8:08 ` [v3,1/2] " Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1442843065-30234-1-git-send-email-linux@rainbow-software.org \
--to=linux@rainbow-software.org \
--cc=dcbw@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.