From: "Andrew F. Davis" <afd@ti.com>
To: Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Lee Jones <lee.jones@linaro.org>, Mark Brown <broonie@kernel.org>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
"Andrew F. Davis" <afd@ti.com>
Subject: [PATCH v2 1/3] Documentation: tps65912: Add DT bindings for the TPS65912 PMIC
Date: Wed, 23 Sep 2015 11:07:37 -0500 [thread overview]
Message-ID: <1443024459-15770-2-git-send-email-afd@ti.com> (raw)
In-Reply-To: <1443024459-15770-1-git-send-email-afd@ti.com>
The TPS65912 PMIC contains several regulators and a GPIO controller.
Add bindings for the TPS65912 PMIC.
Signed-off-by: Andrew F. Davis <afd@ti.com>
---
.../devicetree/bindings/gpio/gpio-tps65912.txt | 16 +++++++++
Documentation/devicetree/bindings/mfd/tps65912.txt | 42 ++++++++++++++++++++++
.../bindings/regulator/tps65912-regulator.txt | 32 +++++++++++++++++
3 files changed, 90 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-tps65912.txt
create mode 100644 Documentation/devicetree/bindings/mfd/tps65912.txt
create mode 100644 Documentation/devicetree/bindings/regulator/tps65912-regulator.txt
diff --git a/Documentation/devicetree/bindings/gpio/gpio-tps65912.txt b/Documentation/devicetree/bindings/gpio/gpio-tps65912.txt
new file mode 100644
index 0000000..0c5c05c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-tps65912.txt
@@ -0,0 +1,16 @@
+* TPS65912 GPIO Controller bindings
+
+Required properties:
+ - compatible : Should be "ti,tps65912-gpio".
+ - gpio-controller : Marks the device node as a GPIO Controller.
+ - #gpio-cells : Should be two. The first cell is the pin number and
+ the second cell is used to specify flags.
+ See include/dt-bindings/gpio/gpio.h for possible values.
+
+Example:
+
+ gpio4: tps65912_gpio {
+ compatible = "ti,tps65912-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/mfd/tps65912.txt b/Documentation/devicetree/bindings/mfd/tps65912.txt
new file mode 100644
index 0000000..a2c94b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/tps65912.txt
@@ -0,0 +1,42 @@
+* TPS65912 Power Management Integrated Circuit bindings
+
+Required properties:
+ - compatible : Should be "ti,tps65912".
+ - reg : Slave address or chip select number (I2C / SPI).
+ - interrupt-parent : The parent interrupt controller.
+ - interrupts : The interrupt line the device is connected to.
+ - interrupt-controller : Marks the device node as an interrupt controller.
+ - #interrupt-cells: The number of cells to describe an IRQ, this should be 2.
+ The first cell is the IRQ number.
+ The second cell is the flags, encoded as the trigger masks from
+ ../interrupt-controller/interrupts.txt
+
+Additional nodes defined in:
+ - Regulators: ../regulator/tps65912-regulator.txt
+ - GPIO: ../gpio/gpio-tps65912.txt.
+
+Example:
+
+ pmic: tps65912@2d {
+ compatible = "ti,tps65912";
+ reg = <0x2d>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ dcdc1: regulator-dcdc1 {
+ compatible = "ti,tps65912-dcdc1";
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <1144000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ gpio4: tps65912_gpio {
+ compatible = "ti,tps65912-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/tps65912-regulator.txt b/Documentation/devicetree/bindings/regulator/tps65912-regulator.txt
new file mode 100644
index 0000000..e8c21f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/tps65912-regulator.txt
@@ -0,0 +1,32 @@
+* TPS65912 regulator bindings
+
+Required properties:
+ - compatible: Should be:
+ - "ti,tps65912-dcdc1" for DCDC1
+ - "ti,tps65912-dcdc2" for DCDC2
+ - "ti,tps65912-dcdc3" for DCDC3
+ - "ti,tps65912-dcdc4" for DCDC4
+ - "ti,tps65912-ldo1" for LDO1
+ - "ti,tps65912-ldo2" for LDO2
+ - "ti,tps65912-ldo3" for LDO3
+ - "ti,tps65912-ldo4" for LDO4
+ - "ti,tps65912-ldo5" for LDO5
+ - "ti,tps65912-ldo6" for LDO6
+ - "ti,tps65912-ldo7" for LDO7
+ - "ti,tps65912-ldo8" for LDO8
+ - "ti,tps65912-ldo9" for LDO9
+ - "ti,tps65912-ldo10" for LDO10
+
+Optional properties:
+ - Any optional property defined in ../regulator/regulator.txt
+
+Example:
+
+ xyz: regulator@0 {
+ compatible = "ti,tps65912-dcdc1";
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <1144000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: "Andrew F. Davis" <afd@ti.com>
To: Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Lee Jones <lee.jones@linaro.org>, Mark Brown <broonie@kernel.org>
Cc: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
"Andrew F. Davis" <afd@ti.com>
Subject: [PATCH v2 1/3] Documentation: tps65912: Add DT bindings for the TPS65912 PMIC
Date: Wed, 23 Sep 2015 11:07:37 -0500 [thread overview]
Message-ID: <1443024459-15770-2-git-send-email-afd@ti.com> (raw)
In-Reply-To: <1443024459-15770-1-git-send-email-afd@ti.com>
The TPS65912 PMIC contains several regulators and a GPIO controller.
Add bindings for the TPS65912 PMIC.
Signed-off-by: Andrew F. Davis <afd@ti.com>
---
.../devicetree/bindings/gpio/gpio-tps65912.txt | 16 +++++++++
Documentation/devicetree/bindings/mfd/tps65912.txt | 42 ++++++++++++++++++++++
.../bindings/regulator/tps65912-regulator.txt | 32 +++++++++++++++++
3 files changed, 90 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-tps65912.txt
create mode 100644 Documentation/devicetree/bindings/mfd/tps65912.txt
create mode 100644 Documentation/devicetree/bindings/regulator/tps65912-regulator.txt
diff --git a/Documentation/devicetree/bindings/gpio/gpio-tps65912.txt b/Documentation/devicetree/bindings/gpio/gpio-tps65912.txt
new file mode 100644
index 0000000..0c5c05c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-tps65912.txt
@@ -0,0 +1,16 @@
+* TPS65912 GPIO Controller bindings
+
+Required properties:
+ - compatible : Should be "ti,tps65912-gpio".
+ - gpio-controller : Marks the device node as a GPIO Controller.
+ - #gpio-cells : Should be two. The first cell is the pin number and
+ the second cell is used to specify flags.
+ See include/dt-bindings/gpio/gpio.h for possible values.
+
+Example:
+
+ gpio4: tps65912_gpio {
+ compatible = "ti,tps65912-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/mfd/tps65912.txt b/Documentation/devicetree/bindings/mfd/tps65912.txt
new file mode 100644
index 0000000..a2c94b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/tps65912.txt
@@ -0,0 +1,42 @@
+* TPS65912 Power Management Integrated Circuit bindings
+
+Required properties:
+ - compatible : Should be "ti,tps65912".
+ - reg : Slave address or chip select number (I2C / SPI).
+ - interrupt-parent : The parent interrupt controller.
+ - interrupts : The interrupt line the device is connected to.
+ - interrupt-controller : Marks the device node as an interrupt controller.
+ - #interrupt-cells: The number of cells to describe an IRQ, this should be 2.
+ The first cell is the IRQ number.
+ The second cell is the flags, encoded as the trigger masks from
+ ../interrupt-controller/interrupts.txt
+
+Additional nodes defined in:
+ - Regulators: ../regulator/tps65912-regulator.txt
+ - GPIO: ../gpio/gpio-tps65912.txt.
+
+Example:
+
+ pmic: tps65912@2d {
+ compatible = "ti,tps65912";
+ reg = <0x2d>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ dcdc1: regulator-dcdc1 {
+ compatible = "ti,tps65912-dcdc1";
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <1144000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ gpio4: tps65912_gpio {
+ compatible = "ti,tps65912-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/tps65912-regulator.txt b/Documentation/devicetree/bindings/regulator/tps65912-regulator.txt
new file mode 100644
index 0000000..e8c21f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/tps65912-regulator.txt
@@ -0,0 +1,32 @@
+* TPS65912 regulator bindings
+
+Required properties:
+ - compatible: Should be:
+ - "ti,tps65912-dcdc1" for DCDC1
+ - "ti,tps65912-dcdc2" for DCDC2
+ - "ti,tps65912-dcdc3" for DCDC3
+ - "ti,tps65912-dcdc4" for DCDC4
+ - "ti,tps65912-ldo1" for LDO1
+ - "ti,tps65912-ldo2" for LDO2
+ - "ti,tps65912-ldo3" for LDO3
+ - "ti,tps65912-ldo4" for LDO4
+ - "ti,tps65912-ldo5" for LDO5
+ - "ti,tps65912-ldo6" for LDO6
+ - "ti,tps65912-ldo7" for LDO7
+ - "ti,tps65912-ldo8" for LDO8
+ - "ti,tps65912-ldo9" for LDO9
+ - "ti,tps65912-ldo10" for LDO10
+
+Optional properties:
+ - Any optional property defined in ../regulator/regulator.txt
+
+Example:
+
+ xyz: regulator@0 {
+ compatible = "ti,tps65912-dcdc1";
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <1144000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
--
1.9.1
next prev parent reply other threads:[~2015-09-23 16:07 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-23 16:07 [PATCH v2 0/3] mfd: tps65912: Driver rewrite with DT support Andrew F. Davis
2015-09-23 16:07 ` Andrew F. Davis
2015-09-23 16:07 ` Andrew F. Davis [this message]
2015-09-23 16:07 ` [PATCH v2 1/3] Documentation: tps65912: Add DT bindings for the TPS65912 PMIC Andrew F. Davis
2015-09-23 16:07 ` [PATCH v2 2/3] mfd: tps65912: Remove old driver in preparation for new driver Andrew F. Davis
2015-09-23 16:07 ` Andrew F. Davis
2015-09-23 16:07 ` [PATCH v2 3/3] mfd: tps65912: Rewrite driver adding DT support and using regmap Andrew F. Davis
2015-09-23 16:07 ` Andrew F. Davis
2015-09-23 17:53 ` Mark Brown
[not found] ` <20150923175317.GU30445-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2015-09-23 18:49 ` Andrew F. Davis
2015-09-23 18:49 ` Andrew F. Davis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1443024459-15770-2-git-send-email-afd@ti.com \
--to=afd@ti.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.