[PATCH 2/6] chipidea-imx: allow phymode configuration in pdata

["Eric Bénard" <eric@eukrea.com>]

it's currently only handled through DT and for i.MX25 OTG port (at least),
we need to configure portsc to get host mode working but it actually fails
as ci->phymode is 0 which is USBPHY_INTERFACE_MODE_UNKNOWN

Signed-off-by: Eric Bénard <eric@eukrea.com>
---
 drivers/usb/imx/chipidea-imx.c | 1 +
 include/usb/chipidea-imx.h     | 3 +++
 2 files changed, 4 insertions(+)

diff --git a/drivers/usb/imx/chipidea-imx.c b/drivers/usb/imx/chipidea-imx.c
index 1dca6bf..28a0fff 100644
--- a/drivers/usb/imx/chipidea-imx.c
+++ b/drivers/usb/imx/chipidea-imx.c
@@ -236,6 +236,7 @@ static int imx_chipidea_probe(struct device_d *dev)
 		}
 		ci->portno = dev->id;
 		ci->flags = pdata->flags;
+		ci->phymode = pdata->phymode;
 		ci->mode = pdata->mode;
 	}
 
diff --git a/include/usb/chipidea-imx.h b/include/usb/chipidea-imx.h
index 09e19af..64f086a 100644
--- a/include/usb/chipidea-imx.h
+++ b/include/usb/chipidea-imx.h
@@ -1,6 +1,8 @@
 #ifndef __USB_CHIPIDEA_IMX_H
 #define __USB_CHIPIDEA_IMX_H
 
+#include <usb/phy.h>
+
 /*
  * POTSC flags
  */
@@ -42,6 +44,7 @@ enum imx_usb_mode {
 
 struct imxusb_platformdata {
 	unsigned long flags;
+	enum usb_phy_interface phymode;
 	enum imx_usb_mode mode;
 };
 
-- 
2.4.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox