All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: Alexey.Brodkin@synopsys.com, abrodkin@synopsys.com,
	davem@davemloft.net, gregkh@linuxfoundation.org,
	peppe.cavallaro@st.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "stmmac: troubleshoot unexpected bits in des0 & des1" has been added to the 3.14-stable tree
Date: Sat, 26 Sep 2015 10:53:21 -0700	[thread overview]
Message-ID: <1443290001164224@kroah.com> (raw)


This is a note to let you know that I've just added the patch titled

    stmmac: troubleshoot unexpected bits in des0 & des1

to the 3.14-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     stmmac-troubleshoot-unexpected-bits-in-des0-des1.patch
and it can be found in the queue-3.14 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From f1590670ce069eefeb93916391a67643e6ad1630 Mon Sep 17 00:00:00 2001
From: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Date: Wed, 24 Jun 2015 11:47:41 +0300
Subject: stmmac: troubleshoot unexpected bits in des0 & des1

From: Alexey Brodkin <Alexey.Brodkin@synopsys.com>

commit f1590670ce069eefeb93916391a67643e6ad1630 upstream.

Current implementation of descriptor init procedure only takes
care about setting/clearing ownership flag in "des0"/"des1"
fields while it is perfectly possible to get unexpected bits
set because of the following factors:

 [1] On driver probe underlying memory allocated with
     dma_alloc_coherent() might not be zeroed and so
     it will be filled with garbage.

 [2] During driver operation some bits could be set by SD/MMC
     controller (for example error flags etc).

And unexpected and/or randomly set flags in "des0"/"des1"
fields may lead to unpredictable behavior of GMAC DMA block.

This change addresses both items above with:

 [1] Use of dma_zalloc_coherent() instead of simple
     dma_alloc_coherent() to make sure allocated memory is
     zeroed. That shouldn't affect performance because
     this allocation only happens once on driver probe.

 [2] Do explicit zeroing of both "des0" and "des1" fields
     of all buffer descriptors during initialization of
     DMA transfer.

And while at it fixed identation of dma_free_coherent()
counterpart as well.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: arc-linux-dev@synopsys.com
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Cc: David Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/ethernet/stmicro/stmmac/descs.h       |    2 +
 drivers/net/ethernet/stmicro/stmmac/enh_desc.c    |    3 +
 drivers/net/ethernet/stmicro/stmmac/norm_desc.c   |    3 +
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c |   44 +++++++++++-----------
 4 files changed, 28 insertions(+), 24 deletions(-)

--- a/drivers/net/ethernet/stmicro/stmmac/descs.h
+++ b/drivers/net/ethernet/stmicro/stmmac/descs.h
@@ -158,6 +158,8 @@ struct dma_desc {
 			u32 buffer2_size:13;
 			u32 reserved4:3;
 		} etx;		/* -- enhanced -- */
+
+		u64 all_flags;
 	} des01;
 	unsigned int des2;
 	unsigned int des3;
--- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
@@ -240,6 +240,7 @@ static int enh_desc_get_rx_status(void *
 static void enh_desc_init_rx_desc(struct dma_desc *p, int disable_rx_ic,
 				  int mode, int end)
 {
+	p->des01.all_flags = 0;
 	p->des01.erx.own = 1;
 	p->des01.erx.buffer1_size = BUF_SIZE_8KiB - 1;
 
@@ -254,7 +255,7 @@ static void enh_desc_init_rx_desc(struct
 
 static void enh_desc_init_tx_desc(struct dma_desc *p, int mode, int end)
 {
-	p->des01.etx.own = 0;
+	p->des01.all_flags = 0;
 	if (mode == STMMAC_CHAIN_MODE)
 		ehn_desc_tx_set_on_chain(p, end);
 	else
--- a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
@@ -123,6 +123,7 @@ static int ndesc_get_rx_status(void *dat
 static void ndesc_init_rx_desc(struct dma_desc *p, int disable_rx_ic, int mode,
 			       int end)
 {
+	p->des01.all_flags = 0;
 	p->des01.rx.own = 1;
 	p->des01.rx.buffer1_size = BUF_SIZE_2KiB - 1;
 
@@ -137,7 +138,7 @@ static void ndesc_init_rx_desc(struct dm
 
 static void ndesc_init_tx_desc(struct dma_desc *p, int mode, int end)
 {
-	p->des01.tx.own = 0;
+	p->des01.all_flags = 0;
 	if (mode == STMMAC_CHAIN_MODE)
 		ndesc_tx_set_on_chain(p, end);
 	else
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1145,41 +1145,41 @@ static int alloc_dma_desc_resources(stru
 		goto err_tx_skbuff;
 
 	if (priv->extend_desc) {
-		priv->dma_erx = dma_alloc_coherent(priv->device, rxsize *
-						   sizeof(struct
-							  dma_extended_desc),
-						   &priv->dma_rx_phy,
-						   GFP_KERNEL);
+		priv->dma_erx = dma_zalloc_coherent(priv->device, rxsize *
+						    sizeof(struct
+							   dma_extended_desc),
+						    &priv->dma_rx_phy,
+						    GFP_KERNEL);
 		if (!priv->dma_erx)
 			goto err_dma;
 
-		priv->dma_etx = dma_alloc_coherent(priv->device, txsize *
-						   sizeof(struct
-							  dma_extended_desc),
-						   &priv->dma_tx_phy,
-						   GFP_KERNEL);
+		priv->dma_etx = dma_zalloc_coherent(priv->device, txsize *
+						    sizeof(struct
+							   dma_extended_desc),
+						    &priv->dma_tx_phy,
+						    GFP_KERNEL);
 		if (!priv->dma_etx) {
 			dma_free_coherent(priv->device, priv->dma_rx_size *
-					sizeof(struct dma_extended_desc),
-					priv->dma_erx, priv->dma_rx_phy);
+					  sizeof(struct dma_extended_desc),
+					  priv->dma_erx, priv->dma_rx_phy);
 			goto err_dma;
 		}
 	} else {
-		priv->dma_rx = dma_alloc_coherent(priv->device, rxsize *
-						  sizeof(struct dma_desc),
-						  &priv->dma_rx_phy,
-						  GFP_KERNEL);
+		priv->dma_rx = dma_zalloc_coherent(priv->device, rxsize *
+						   sizeof(struct dma_desc),
+						   &priv->dma_rx_phy,
+						   GFP_KERNEL);
 		if (!priv->dma_rx)
 			goto err_dma;
 
-		priv->dma_tx = dma_alloc_coherent(priv->device, txsize *
-						  sizeof(struct dma_desc),
-						  &priv->dma_tx_phy,
-						  GFP_KERNEL);
+		priv->dma_tx = dma_zalloc_coherent(priv->device, txsize *
+						   sizeof(struct dma_desc),
+						   &priv->dma_tx_phy,
+						   GFP_KERNEL);
 		if (!priv->dma_tx) {
 			dma_free_coherent(priv->device, priv->dma_rx_size *
-					sizeof(struct dma_desc),
-					priv->dma_rx, priv->dma_rx_phy);
+					  sizeof(struct dma_desc),
+					  priv->dma_rx, priv->dma_rx_phy);
 			goto err_dma;
 		}
 	}


Patches currently in stable-queue which might be from Alexey.Brodkin@synopsys.com are

queue-3.14/stmmac-troubleshoot-unexpected-bits-in-des0-des1.patch
queue-3.14/stmmac-fix-check-for-phydev-being-open.patch

                 reply	other threads:[~2015-09-26 17:53 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1443290001164224@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=Alexey.Brodkin@synopsys.com \
    --cc=abrodkin@synopsys.com \
    --cc=davem@davemloft.net \
    --cc=peppe.cavallaro@st.com \
    --cc=stable-commits@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.