From: Chin Liang See <clsee@altera.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/2] nios2: convert altera sysid to driver model
Date: Tue, 29 Sep 2015 19:54:20 -0500 [thread overview]
Message-ID: <1443574460.2125.11.camel@clsee-VirtualBox> (raw)
In-Reply-To: <1443511438-18625-2-git-send-email-thomas@wytron.com.tw>
Hi Thomas,
On Tue, 2015-09-29 at 15:23 +0800, thomas at wytron.com.tw wrote:
> Convert altera sysid to driver model with misc uclass.
>
> Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Thanks for the patch.
> ---
> arch/nios2/cpu/Makefile | 2 +-
> arch/nios2/cpu/cpu.c | 15 +----
> arch/nios2/cpu/sysid.c | 46 --------------
> arch/nios2/dts/3c120_devboard.dts | 8 +++
> board/altera/nios2-generic/nios2-generic.c | 6 +-
> configs/nios2-generic_defconfig | 2 +
> drivers/misc/Kconfig | 7 +++
> drivers/misc/Makefile | 1 +
> drivers/misc/altera_sysid.c | 99 ++++++++++++++++++++++++++++++
> include/configs/nios2-generic.h | 3 +-
> 10 files changed, 126 insertions(+), 63 deletions(-)
> delete mode 100644 arch/nios2/cpu/sysid.c
> create mode 100644 drivers/misc/altera_sysid.c
>
> diff --git a/arch/nios2/cpu/Makefile b/arch/nios2/cpu/Makefile
> index 3fe7847..185ca3c 100644
> --- a/arch/nios2/cpu/Makefile
> +++ b/arch/nios2/cpu/Makefile
> @@ -7,5 +7,5 @@
>
> extra-y = start.o
> obj-y = exceptions.o
> -obj-y += cpu.o interrupts.o sysid.o traps.o
> +obj-y += cpu.o interrupts.o traps.o
> obj-y += fdt.o
> diff --git a/arch/nios2/cpu/cpu.c b/arch/nios2/cpu/cpu.c
> index 88984e2..7b1717c 100644
> --- a/arch/nios2/cpu/cpu.c
> +++ b/arch/nios2/cpu/cpu.c
> @@ -13,22 +13,11 @@
>
> DECLARE_GLOBAL_DATA_PTR;
>
> -#if defined (CONFIG_SYS_NIOS_SYSID_BASE)
> -extern void display_sysid (void);
> -#endif /* CONFIG_SYS_NIOS_SYSID_BASE */
> -
> -#ifdef CONFIG_DISPLAY_CPUINFO
> int print_cpuinfo(void)
> {
> - printf ("CPU : Nios-II\n");
> -#if !defined(CONFIG_SYS_NIOS_SYSID_BASE)
> - printf ("SYSID : <unknown>\n");
> -#else
> - display_sysid ();
> -#endif
> - return (0);
> + printf("CPU: Nios-II\n");
> + return 0;
> }
> -#endif /* CONFIG_DISPLAY_CPUINFO */
>
> int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
> {
> diff --git a/arch/nios2/cpu/sysid.c b/arch/nios2/cpu/sysid.c
> deleted file mode 100644
> index 50819b2..0000000
> --- a/arch/nios2/cpu/sysid.c
> +++ /dev/null
> @@ -1,46 +0,0 @@
> -/*
> - * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
> - * Scott McNutt <smcnutt@psyent.com>
> - *
> - * SPDX-License-Identifier: GPL-2.0+
> - */
> -
> -#include <common.h>
> -
> -#if defined (CONFIG_SYS_NIOS_SYSID_BASE)
> -
> -#include <command.h>
> -#include <asm/io.h>
> -#include <linux/time.h>
> -
> -typedef volatile struct {
> - unsigned id; /* The system build id */
> - unsigned timestamp; /* Timestamp */
> -} nios_sysid_t;
> -
> -void display_sysid (void)
> -{
> - nios_sysid_t *sysid = (nios_sysid_t *)CONFIG_SYS_NIOS_SYSID_BASE;
> - struct tm t;
> - char asc[32];
> - time_t stamp;
> -
> - stamp = readl (&sysid->timestamp);
> - localtime_r (&stamp, &t);
> - asctime_r (&t, asc);
> - printf ("SYSID : %08lx, %s", readl (&sysid->id), asc);
> -
> -}
> -
> -int do_sysid (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
> -{
> - display_sysid ();
> - return (0);
> -}
> -
> -U_BOOT_CMD(
> - sysid, 1, 1, do_sysid,
> - "display Nios-II system id",
> - ""
> -);
> -#endif /* CONFIG_SYS_NIOS_SYSID_BASE */
> diff --git a/arch/nios2/dts/3c120_devboard.dts b/arch/nios2/dts/3c120_devboard.dts
> index 2e2956f..2eb339c 100644
> --- a/arch/nios2/dts/3c120_devboard.dts
> +++ b/arch/nios2/dts/3c120_devboard.dts
> @@ -72,6 +72,7 @@
> <0x00004cc0 0x08004cc0 0x00000010>,
> <0x00004ce0 0x08004ce0 0x00000010>,
> <0x00004d00 0x08004d00 0x00000010>,
> + <0x00004d40 0x08004d40 0x00000008>,
> <0x00004d50 0x08004d50 0x00000008>,
> <0x00008000 0x08008000 0x00000020>,
> <0x00400000 0x08400000 0x00000020>;
> @@ -92,6 +93,13 @@
> clock-frequency = < 125000000 >;
> };
>
> + sysid: sysid at 0x4d40 {
> + compatible = "altr,sysid-1.0";
> + reg = <0x00004d40 0x00000008>;
> + id = <0>;
> + timestamp = <1440939556>;
I believe we won't need the id and timestamp as these will be read from
sysid register.
Thanks
Chin Liang
p/s: Oh ya, let me know if you need my help to send new revision of
those patches commented by me. I can share the load :)
> + };
> +
> jtag_uart: serial at 0x4d50 {
> compatible = "altr,juart-1.0";
> reg = <0x00004d50 0x00000008>;
> diff --git a/board/altera/nios2-generic/nios2-generic.c b/board/altera/nios2-generic/nios2-generic.c
> index 61d32c7..e08b8f7 100644
> --- a/board/altera/nios2-generic/nios2-generic.c
> +++ b/board/altera/nios2-generic/nios2-generic.c
> @@ -42,7 +42,11 @@ int board_early_init_r(void)
>
> int checkboard(void)
> {
> - printf("BOARD : %s\n", CONFIG_BOARD_NAME);
> +#ifdef CONFIG_ALTERA_SYSID
> + extern void display_sysid(void);
> + display_sysid();
> +#endif
> + printf("BOARD: %s\n", CONFIG_BOARD_NAME);
> return 0;
> }
>
> diff --git a/configs/nios2-generic_defconfig b/configs/nios2-generic_defconfig
> index 1aa2d9e..d8d26e5 100644
> --- a/configs/nios2-generic_defconfig
> +++ b/configs/nios2-generic_defconfig
> @@ -15,6 +15,8 @@ CONFIG_CMD_DHCP=y
> CONFIG_CMD_PING=y
> CONFIG_NET_RANDOM_ETHADDR=y
> CONFIG_ALTERA_PIO=y
> +CONFIG_DM_MISC=y
> +CONFIG_ALTERA_SYSID=y
> CONFIG_ALTERA_JTAG_UART=y
> CONFIG_ALTERA_JTAG_UART_BYPASS=y
> CONFIG_DM_TIMER=y
> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> index 51c2a08..06a10d4 100644
> --- a/drivers/misc/Kconfig
> +++ b/drivers/misc/Kconfig
> @@ -10,6 +10,13 @@ config DM_MISC
> help
> Enable driver model for miscellaneous devices.
>
> +config ALTERA_SYSID
> + bool "Altera Sysid support"
> + depends on DM_MISC
> + help
> + Select this to enable a sysid for Altera devices. Please find
> + details on the "Embedded Peripherals IP User Guide" of Altera.
> +
> config CMD_CROS_EC
> bool "Enable crosec command"
> depends on CROS_EC
> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
> index b285946..449425e 100644
> --- a/drivers/misc/Makefile
> +++ b/drivers/misc/Makefile
> @@ -7,6 +7,7 @@
>
> obj-$(CONFIG_DM_MISC) += misc-uclass.o
> obj-$(CONFIG_ALI152X) += ali512x.o
> +obj-$(CONFIG_ALTERA_SYSID) += altera_sysid.o
> obj-$(CONFIG_DS4510) += ds4510.o
> obj-$(CONFIG_CBMEM_CONSOLE) += cbmem_console.o
> obj-$(CONFIG_CROS_EC) += cros_ec.o
> diff --git a/drivers/misc/altera_sysid.c b/drivers/misc/altera_sysid.c
> new file mode 100644
> index 0000000..648fdb1
> --- /dev/null
> +++ b/drivers/misc/altera_sysid.c
> @@ -0,0 +1,99 @@
> +/*
> + * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
> + * Scott McNutt <smcnutt@psyent.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <dm.h>
> +#include <misc.h>
> +#include <errno.h>
> +#include <command.h>
> +#include <asm/io.h>
> +#include <linux/time.h>
> +
> +struct altera_sysid_regs {
> + u32 id; /* The system build id */
> + u32 timestamp; /* Timestamp */
> +};
> +
> +struct altera_sysid_platdata {
> + struct altera_sysid_regs *regs;
> +};
> +
> +void display_sysid (void)
> +{
> + struct udevice *dev;
> + const struct dm_misc_ops *ops;
> + u32 sysid[2];
> + struct tm t;
> + char asc[32];
> + time_t stamp;
> +
> + uclass_first_device(UCLASS_MISC, &dev);
> + if (!dev)
> + return;
> + ops = device_get_ops(dev);
> + if (!ops->read)
> + return;
> + ops->read(dev, 0, &sysid, sizeof(sysid));
> +
> + stamp = sysid[1];
> + localtime_r(&stamp, &t);
> + asctime_r(&t, asc);
> + printf("SYSID: %08x, %s", sysid[0], asc);
> +}
> +
> +int do_sysid (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
> +{
> + display_sysid();
> + return 0;
> +}
> +
> +U_BOOT_CMD(
> + sysid, 1, 1, do_sysid,
> + "display Nios-II system id",
> + ""
> +);
> +
> +static int altera_sysid_read(struct udevice *dev,
> + int offset, void *buf, int size)
> +{
> + struct altera_sysid_platdata *plat = dev->platdata;
> + struct altera_sysid_regs *const regs = plat->regs;
> + u32 *sysid = buf;
> +
> + sysid[0] = readl(®s->id);
> + sysid[1] = readl(®s->timestamp);
> +
> + return 0;
> +}
> +
> +static int altera_sysid_ofdata_to_platdata(struct udevice *dev)
> +{
> + struct altera_sysid_platdata *plat = dev_get_platdata(dev);
> +
> + plat->regs = ioremap(dev_get_addr(dev),
> + sizeof(struct altera_sysid_regs));
> +
> + return 0;
> +}
> +
> +static const struct dm_misc_ops altera_sysid_ops = {
> + .read = altera_sysid_read,
> +};
> +
> +static const struct udevice_id altera_sysid_ids[] = {
> + { .compatible = "altr,sysid-1.0", },
> + { }
> +};
> +
> +U_BOOT_DRIVER(altera_sysid) = {
> + .name = "altera_sysid",
> + .id = UCLASS_MISC,
> + .of_match = altera_sysid_ids,
> + .ofdata_to_platdata = altera_sysid_ofdata_to_platdata,
> + .platdata_auto_alloc_size = sizeof(struct altera_sysid_platdata),
> + .ops = &altera_sysid_ops,
> +};
> diff --git a/include/configs/nios2-generic.h b/include/configs/nios2-generic.h
> index ae19676..bd219e3 100644
> --- a/include/configs/nios2-generic.h
> +++ b/include/configs/nios2-generic.h
> @@ -16,8 +16,7 @@
> #define CONFIG_BOARD_NAME "nios2-generic" /* custom board name */
> #define CONFIG_BOARD_EARLY_INIT_F /* enable early board-spec. init */
> #define CONFIG_BOARD_EARLY_INIT_R
> -#define CONFIG_DISPLAY_CPUINFO
> -#define CONFIG_DISPLAY_BOARDINFO
> +#define CONFIG_DISPLAY_BOARDINFO_LATE
> #define CONFIG_SYS_NIOS_SYSID_BASE CONFIG_SYS_SYSID_BASE
>
> /*
next prev parent reply other threads:[~2015-09-30 0:54 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-29 7:23 [U-Boot] [PATCH 1/2] dm: implement a Miscellaneous uclass Thomas Chou
2015-09-29 7:23 ` [U-Boot] [PATCH 2/2] nios2: convert altera sysid to driver model Thomas Chou
2015-09-30 0:54 ` Chin Liang See [this message]
2015-09-29 9:04 ` [U-Boot] [PATCH v2 1/2] dm: implement a Miscellaneous uclass Thomas Chou
2015-09-29 9:04 ` [U-Boot] [PATCH v2 2/2] nios2: convert altera sysid to driver model Thomas Chou
2015-09-29 9:30 ` Stefan Roese
2015-09-29 11:55 ` Thomas Chou
2015-09-29 11:59 ` [U-Boot] [PATCH v3 1/2] dm: implement a Miscellaneous uclass Thomas Chou
2015-09-29 11:59 ` [U-Boot] [PATCH v3 2/2] nios2: convert altera sysid to driver model Thomas Chou
2015-10-03 14:29 ` [U-Boot] [PATCH v3 1/2] dm: implement a Miscellaneous uclass Simon Glass
2015-10-05 2:18 ` [U-Boot] [PATCH v4 " Thomas Chou
2015-10-05 2:18 ` [U-Boot] [PATCH v4 2/2] nios2: convert altera sysid to driver model Thomas Chou
2015-10-06 22:49 ` Simon Glass
2015-10-07 2:20 ` Chin Liang See
2015-10-06 22:49 ` [U-Boot] [PATCH v4 1/2] dm: implement a Miscellaneous uclass Simon Glass
2015-10-07 12:29 ` [U-Boot] [PATCH v5 " Thomas Chou
2015-10-07 12:29 ` [U-Boot] [PATCH v5 2/2] nios2: convert altera sysid to driver model Thomas Chou
2015-10-07 22:47 ` Simon Glass
2015-10-10 9:07 ` [U-Boot] [PATCH v6 1/2] dm: implement a Miscellaneous uclass Thomas Chou
2015-10-10 9:07 ` [U-Boot] [PATCH v6 2/2] nios2: convert altera sysid to driver model Thomas Chou
2015-10-13 13:18 ` Thomas Chou
2015-10-13 13:18 ` [U-Boot] [PATCH v6 1/2] dm: implement a Miscellaneous uclass Thomas Chou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1443574460.2125.11.camel@clsee-VirtualBox \
--to=clsee@altera.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.