All of lore.kernel.org
 help / color / mirror / Atom feed
diff for duplicates of <1443634479-18111-1-git-send-email-codekipper@gmail.com>

diff --git a/a/1.txt b/N1/1.txt
index 2dede44..e492e43 100644
--- a/a/1.txt
+++ b/N1/1.txt
@@ -1,4 +1,4 @@
-From: Marcus Cooper <codekipper@gmail.com>
+From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
 
 The A20-SOM-EVB is a reference design of a 2-layer board for the
 A20-SOM.
@@ -6,7 +6,7 @@ It expands the features of A20-SOM by adding VGA connector, HDMI
 connector, audio In/Out, LCD connector, 2 Mpix camera, gigabit
 Ethernet, SATA, USB-OTG and 2 USB hosts.
 
-Signed-off-by: Marcus Cooper <codekipper@gmail.com>
+Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
 ---
 Changes since v4:
 - removed reg_usb0_vbus which will return when usb otg is added.
@@ -44,7 +44,7 @@ index 0000000..f6c37cd
 +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
 @@ -0,0 +1,198 @@
 +/*
-+ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
++ * Copyright 2015 - Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
 + *
 + * This file is dual-licensed: you can use it either under the terms
 + * of the GPL or the X11 license, at your option. Note that this dual
@@ -138,7 +138,7 @@ index 0000000..f6c37cd
 +	phy-mode = "rgmii";
 +	status = "okay";
 +
-+	phy1: ethernet-phy at 1 {
++	phy1: ethernet-phy@1 {
 +		reg = <1>;
 +	};
 +};
@@ -148,7 +148,7 @@ index 0000000..f6c37cd
 +	pinctrl-0 = <&i2c0_pins_a>;
 +	status = "okay";
 +
-+	axp209: pmic at 34 {
++	axp209: pmic@34 {
 +		reg = <0x34>;
 +		interrupt-parent = <&nmi_intc>;
 +		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
@@ -174,14 +174,14 @@ index 0000000..f6c37cd
 +};
 +
 +&pio {
-+	ahci_pwr_pin_olimex_som_evb: ahci_pwr_pin at 1 {
++	ahci_pwr_pin_olimex_som_evb: ahci_pwr_pin@1 {
 +		allwinner,pins = "PC3";
 +		allwinner,function = "gpio_out";
 +		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 +		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 +	};
 +
-+	led_pins_olimex_som_evb: led_pins at 0 {
++	led_pins_olimex_som_evb: led_pins@0 {
 +		allwinner,pins = "PH2";
 +		allwinner,function = "gpio_out";
 +		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
diff --git a/a/content_digest b/N1/content_digest
index 1904b5f..b74fdd6 100644
--- a/a/content_digest
+++ b/N1/content_digest
@@ -1,10 +1,14 @@
- "From\0codekipper@gmail.com (codekipper at gmail.com)\0"
- "Subject\0[linux-sunxi][PATCH v5] ARM: sun7i: dt: Add new Olimex A20 EVB device\0"
+ "From\0codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org\0"
+ "Subject\0[PATCH v5] ARM: sun7i: dt: Add new Olimex A20 EVB device\0"
  "Date\0Wed, 30 Sep 2015 19:34:39 +0200\0"
- "To\0linux-arm-kernel@lists.infradead.org\0"
+ "To\0maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org\0"
+ "Cc\0linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org"
+  devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
+  linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
+ " Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\0"
  "\00:1\0"
  "b\0"
- "From: Marcus Cooper <codekipper@gmail.com>\n"
+ "From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\n"
  "\n"
  "The A20-SOM-EVB is a reference design of a 2-layer board for the\n"
  "A20-SOM.\n"
@@ -12,7 +16,7 @@
  "connector, audio In/Out, LCD connector, 2 Mpix camera, gigabit\n"
  "Ethernet, SATA, USB-OTG and 2 USB hosts.\n"
  "\n"
- "Signed-off-by: Marcus Cooper <codekipper@gmail.com>\n"
+ "Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\n"
  "---\n"
  "Changes since v4:\n"
  "- removed reg_usb0_vbus which will return when usb otg is added.\n"
@@ -50,7 +54,7 @@
  "+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts\n"
  "@@ -0,0 +1,198 @@\n"
  "+/*\n"
- "+ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>\n"
+ "+ * Copyright 2015 - Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\n"
  "+ *\n"
  "+ * This file is dual-licensed: you can use it either under the terms\n"
  "+ * of the GPL or the X11 license, at your option. Note that this dual\n"
@@ -144,7 +148,7 @@
  "+\tphy-mode = \"rgmii\";\n"
  "+\tstatus = \"okay\";\n"
  "+\n"
- "+\tphy1: ethernet-phy at 1 {\n"
+ "+\tphy1: ethernet-phy@1 {\n"
  "+\t\treg = <1>;\n"
  "+\t};\n"
  "+};\n"
@@ -154,7 +158,7 @@
  "+\tpinctrl-0 = <&i2c0_pins_a>;\n"
  "+\tstatus = \"okay\";\n"
  "+\n"
- "+\taxp209: pmic at 34 {\n"
+ "+\taxp209: pmic@34 {\n"
  "+\t\treg = <0x34>;\n"
  "+\t\tinterrupt-parent = <&nmi_intc>;\n"
  "+\t\tinterrupts = <0 IRQ_TYPE_LEVEL_LOW>;\n"
@@ -180,14 +184,14 @@
  "+};\n"
  "+\n"
  "+&pio {\n"
- "+\tahci_pwr_pin_olimex_som_evb: ahci_pwr_pin at 1 {\n"
+ "+\tahci_pwr_pin_olimex_som_evb: ahci_pwr_pin@1 {\n"
  "+\t\tallwinner,pins = \"PC3\";\n"
  "+\t\tallwinner,function = \"gpio_out\";\n"
  "+\t\tallwinner,drive = <SUN4I_PINCTRL_10_MA>;\n"
  "+\t\tallwinner,pull = <SUN4I_PINCTRL_NO_PULL>;\n"
  "+\t};\n"
  "+\n"
- "+\tled_pins_olimex_som_evb: led_pins at 0 {\n"
+ "+\tled_pins_olimex_som_evb: led_pins@0 {\n"
  "+\t\tallwinner,pins = \"PH2\";\n"
  "+\t\tallwinner,function = \"gpio_out\";\n"
  "+\t\tallwinner,drive = <SUN4I_PINCTRL_20_MA>;\n"
@@ -250,4 +254,4 @@
  "-- \n"
  2.6.0
 
-0f1e1ea5d0288c2d0fefac87935a3bbb41965474f6c2835c45fad07f292b9566
+47a25c1d4381541550e8f1e7b1050f472d5fdb192ec85c49dda3aa20a6c1521b

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.