Re: [PATCH v2 3/8] mfd: intel_quark_i2c_gpio: load gpio driver first

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

On Thu, 2015-10-01 at 15:54 +0100, Lee Jones wrote:
> On Thu, 01 Oct 2015, Andy Shevchenko wrote:
> 
> > On Intel Galileo boards the GPIO expander is connected to i2c bus. 
> > Moreover it
> > is able to generate interrupt, but interrupt line is connected to 
> > GPIO. That's
> > why we have to have GPIO driver in place when we will probe i2c 
> > host with
> > device connected to it.
> > 
> > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> > ---
> >  drivers/mfd/intel_quark_i2c_gpio.c | 19 +++++++++----------
> >  1 file changed, 9 insertions(+), 10 deletions(-)
> 
> Acked-by: Lee Jones <lee.jones@linaro.org>
> 
> Are there build dependancies in this set?  Or can all patches filter
> through their own subsystems?

Practically patches 4-8 can go by their own, though it makes not much
sense since it doesn't add a value (they will be not enumerated until
patches 1-4 made an upstream).

> 
> > diff --git a/drivers/mfd/intel_quark_i2c_gpio.c 
> > b/drivers/mfd/intel_quark_i2c_gpio.c
> > index 1ce1603..958c134 100644
> > --- a/drivers/mfd/intel_quark_i2c_gpio.c
> > +++ b/drivers/mfd/intel_quark_i2c_gpio.c
> > @@ -90,19 +90,19 @@ static struct resource intel_quark_gpio_res[] = 
> > {
> >  
> >  static struct mfd_cell intel_quark_mfd_cells[] = {
> >  	{
> > -		.id = MFD_I2C_BAR,
> > -		.name = "i2c_designware",
> > -		.num_resources = ARRAY_SIZE(intel_quark_i2c_res),
> > -		.resources = intel_quark_i2c_res,
> > -		.ignore_resource_conflicts = true,
> > -	},
> > -	{
> >  		.id = MFD_GPIO_BAR,
> >  		.name = "gpio-dwapb",
> >  		.num_resources = ARRAY_SIZE(intel_quark_gpio_res),
> >  		.resources = intel_quark_gpio_res,
> >  		.ignore_resource_conflicts = true,
> >  	},
> > +	{
> > +		.id = MFD_I2C_BAR,
> > +		.name = "i2c_designware",
> > +		.num_resources = ARRAY_SIZE(intel_quark_i2c_res),
> > +		.resources = intel_quark_i2c_res,
> > +		.ignore_resource_conflicts = true,
> > +	},
> >  };
> >  
> >  static const struct pci_device_id intel_quark_mfd_ids[] = {
> > @@ -248,12 +248,11 @@ static int intel_quark_mfd_probe(struct 
> > pci_dev *pdev,
> >  
> >  	dev_set_drvdata(&pdev->dev, quark_mfd);
> >  
> > -	ret = intel_quark_i2c_setup(pdev, 
> > &intel_quark_mfd_cells[MFD_I2C_BAR]);
> > +	ret = intel_quark_i2c_setup(pdev, 
> > &intel_quark_mfd_cells[1]);
> >  	if (ret)
> >  		return ret;
> >  
> > -	ret = intel_quark_gpio_setup(pdev,
> > -				    
> >  &intel_quark_mfd_cells[MFD_GPIO_BAR]);
> > +	ret = intel_quark_gpio_setup(pdev, 
> > &intel_quark_mfd_cells[0]);
> >  	if (ret)
> >  		return ret;
> >  
> 

-- 
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy