[PATCH 4/6] docs: add getting started guides for multi-buffer pmd and qat pmd

[Declan Doherty <declan.doherty@intel.com>]

Signed-off-by: Declan Doherty <declan.doherty@intel.com>
---
 doc/guides/cryptodevs/aesni_mb.rst |  76 ++++++++++++++++++
 doc/guides/cryptodevs/index.rst    |  43 ++++++++++
 doc/guides/cryptodevs/qat.rst      | 155 +++++++++++++++++++++++++++++++++++++
 doc/guides/index.rst               |   1 +
 4 files changed, 275 insertions(+)
 create mode 100644 doc/guides/cryptodevs/aesni_mb.rst
 create mode 100644 doc/guides/cryptodevs/index.rst
 create mode 100644 doc/guides/cryptodevs/qat.rst

diff --git a/doc/guides/cryptodevs/aesni_mb.rst b/doc/guides/cryptodevs/aesni_mb.rst
new file mode 100644
index 0000000..826b632
--- /dev/null
+++ b/doc/guides/cryptodevs/aesni_mb.rst
@@ -0,0 +1,76 @@
+..  BSD LICENSE
+    Copyright(c) 2015 Intel Corporation. All rights reserved.
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions
+    are met:
+
+    * Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in
+    the documentation and/or other materials provided with the
+    distribution.
+    * Neither the name of Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived
+    from this software without specific prior written permission.
+
+    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+    "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+    A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+    OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+    SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+    LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+    DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+    THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+    OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+AESN-NI Multi Buffer Crytpo Poll Mode Driver
+============================================
+
+
+The AESNI MB PMD (**librte_pmd_aesni_mb**) provides poll mode crypto driver
+support for utilising Intel multi buffer library, see the white paper
+`Fast Multi-buffer IPsec Implementations on Intel® Architecture Processors
+<https://www-ssl.intel.com/content/www/us/en/intelligent-systems/intel-technology/fast-multi-buffer-ipsec-implementations-ia-processors-paper.html?wapkw=multi+buffer>`_.
+
+The AES-NI MB PMD has current only been tested on Fedora 21 64-bit with gcc.
+
+Features
+--------
+
+AESNI MB PMD has support for:
+
+Cipher algorithms:
+
+* RTE_CRYPTO_SYM_CIPHER_AES128_CBC
+* RTE_CRYPTO_SYM_CIPHER_AES256_CBC
+* RTE_CRYPTO_SYM_CIPHER_AES512_CBC
+
+Hash algorithms:
+
+* RTE_CRYPTO_SYM_HASH_SHA1_HMAC
+* RTE_CRYPTO_SYM_HASH_SHA256_HMAC
+* RTE_CRYPTO_SYM_HASH_SHA512_HMAC
+
+Limitations
+-----------
+
+* Chained mbufs are not supported.
+* Hash only is not supported.
+* Cipher only is not supported.
+* Only in-place is currently supported (destination address is the same as source address).
+* Only supports session-oriented API implementation (session-less APIs are not supported).
+*  Not performance tuned.
+
+Installation
+------------
+
+To build DPKD with the AESNI_MB_PMD the user is required to download the library
+from `here <https://downloadcenter.intel.com/download/22972>`_ and compile it on
+their user system before building DPDK. The environmental variable
+AESNI_MULTI_BUFFER_LIB_PATH must be exported with the path where you extracted
+and built the multi buffer library and finally set
+CONFIG_RTE_LIBRTE_PMD_AESNI_MB=y in config/common_linuxapp.
diff --git a/doc/guides/cryptodevs/index.rst b/doc/guides/cryptodevs/index.rst
new file mode 100644
index 0000000..8949fd0
--- /dev/null
+++ b/doc/guides/cryptodevs/index.rst
@@ -0,0 +1,43 @@
+..  BSD LICENSE
+    Copyright(c) 2015 Intel Corporation. All rights reserved.
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions
+    are met:
+
+    * Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in
+    the documentation and/or other materials provided with the
+    distribution.
+    * Neither the name of Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived
+    from this software without specific prior written permission.
+
+    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+    "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+    A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+    OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+    SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+    LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+    DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+    THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+    OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+Crypto Device Drivers
+====================================
+
+|today|
+
+
+**Contents**
+
+.. toctree::
+    :maxdepth: 2
+    :numbered:
+
+    aesni_mb
+    qat
diff --git a/doc/guides/cryptodevs/qat.rst b/doc/guides/cryptodevs/qat.rst
new file mode 100644
index 0000000..c5c7b2b
--- /dev/null
+++ b/doc/guides/cryptodevs/qat.rst
@@ -0,0 +1,155 @@
+..  BSD LICENSE
+    Copyright(c) 2015 Intel Corporation. All rights reserved.
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions
+    are met:
+
+    * Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in
+    the documentation and/or other materials provided with the
+    distribution.
+    * Neither the name of Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived
+    from this software without specific prior written permission.
+
+    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+    "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+    A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+    OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+    SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+    LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+    DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+    THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+    OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+Quick Assist Crypto Poll Mode Driver
+====================================
+
+
+The QAT PMD provides poll mode crypto driver support for **Intel
+QuickAssist Technology DH895xxC hardware accelerator. QAT PMD has
+current only been tested on Fedora 21 64-bit with gcc.
+
+Features
+--------
+
+QAT PMD has support for:
+
+Cipher algorithms:
+
+* RTE_CRYPTO_SYM_CIPHER_AES128_CBC
+* RTE_CRYPTO_SYM_CIPHER_AES256_CBC
+* RTE_CRYPTO_SYM_CIPHER_AES512_CBC
+
+Hash algorithms:
+
+* RTE_CRYPTO_SYM_HASH_SHA1_HMAC
+* RTE_CRYPTO_SYM_HASH_SHA256_HMAC
+* RTE_CRYPTO_SYM_HASH_SHA512_HMAC
+
+Limitations
+-----------
+
+* Chained mbufs are not supported.
+* Hash only is not supported.
+* Cipher only is not supported.
+* Only in-place is currently supported (destination address is the same as source address).
+* Only supports session-oriented API implementation (session-less APIs are not supported).
+* Not performance tuned.
+
+Installation
+------------
+
+To use the DPDK QAT PMD an SRIOV-enabled QAT kernel driver is required.
+The VF devices exposed by this driver will be used by QAT PMD
+Future kernel versions will provide this as standard, in the interim the
+following steps are necessary to load this driver.
+
+
+Download the latest QuickAssist Technology Driver from 01.org
+https://01.org/packet-processing/intel%C2%AE-quickassist-technology-drivers-and-patches
+Consult the Getting Started Guide at the same URL for further information.
+
+Steps below assume
+  * building on a platform with one DH895xCC device
+  * using package qatmux.l.2.3.0-34.tgz
+  * on Fedora21 kernel 3.17.4-301.fc21.x86_64
+
+In BIOS ensure that SRIOV is enabled and VT-d is disabled.
+
+Uninstall any existing QAT driver, e.g. by running
+  *  "./installer.sh uninstall" in the directory where originally installed
+     or
+  *  "rmmod qat_dh895xcc; rmmod intel_qat"
+
+Build and install the SRIOV-enabled QAT driver
+
+.. code-block:: console
+
+    "mkdir /QAT; cd /QAT"
+    copy qatmux.l.2.3.0-34.tgz to this location
+    "tar zxof qatmux.l.2.3.0-34.tgz"
+    "export ICP_WITHOUT_IOMMU=1"
+    "./installer.sh install QAT1.6 host"
+
+You can use "cat /proc/icp_dh895xcc_dev0/version" to confirm the driver is correctly installed.
+You can use "lspci -d:443" to confirm the bdf of the 32 VF devices available per DH895xCC device.
+
+The unbind command below assumes bdfs of 02:01.00-02:04.07, if yours are different adjust the unbind command below.
+
+Make available to DPDK
+
+.. code-block:: console
+
+   cd $(RTE_SDK) (See http://dpdk.org/doc/quick-start to install DPDK)
+   "modprobe uio"
+   "insmod ./build/kmod/igb_uio.ko"
+   "for device in $(seq 1 4); do for fn in $(seq 0 7); do echo -n 0000:02:0${device}.${fn} > /sys/bus/pci/devices/0000\:02\:0${device}.${fn}/driver/unbind;done ;done"
+   "echo "8086 0443" > /sys/bus/pci/drivers/igb_uio/new_id"
+
+You can use "lspci -vvd:443" to confirm that all devices are now in use by igb_uio kernel driver
+
+
+Notes:
+If using a later kernel and the build fails with an error relating to strict_stroul not being available patch the following file:
+
+.. code-block:: console
+
+  /QAT/QAT1.6/quickassist/utilities/downloader/Target_CoreLibs/uclo/include/linux/uclo_platform.h
+  + #if LINUX_VERSION_CODE >= KERNEL_VERSION(3,18,5)
+  + #define STR_TO_64(str, base, num, endPtr) {endPtr=NULL; if (kstrtoul((str), (base), (num))) printk("Error strtoull convert %s\n", str); }
+  + #else
+  #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)
+  #define STR_TO_64(str, base, num, endPtr) {endPtr=NULL; if (strict_strtoull((str), (base), (num))) printk("Error strtoull convert %s\n", str); }
+  #else
+  #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25)
+  #define STR_TO_64(str, base, num, endPtr) {endPtr=NULL; strict_strtoll((str), (base), (num));}
+  #else
+  #define STR_TO_64(str, base, num, endPtr)                                 \
+       do {                                                               \
+             if (str[0] == '-')                                           \
+             {                                                            \
+                  *(num) = -(simple_strtoull((str+1), &(endPtr), (base))); \
+             }else {                                                      \
+                  *(num) = simple_strtoull((str), &(endPtr), (base));      \
+             }                                                            \
+       } while(0)
+  + #endif
+  #endif
+  #endif
+
+
+If build fails due to missing header files you may need to do following:
+  *  sudo yum install zlib-devel
+  *  sudo yum install openssl-devel
+
+If build or install fails due to mismatching kernel sources you may need to do the following:
+  *  sudo yum install kernel-headers-`uname -r`
+  *  sudo yum install kernel-src-`uname -r`
+  *  sudo yum install kernel-devel-`uname -r`
+
diff --git a/doc/guides/index.rst b/doc/guides/index.rst
index 439c7e3..c5d7a9f 100644
--- a/doc/guides/index.rst
+++ b/doc/guides/index.rst
@@ -42,6 +42,7 @@ Contents:
    xen/index
    prog_guide/index
    nics/index
+   cryptodevs/index
    sample_app_ug/index
    testpmd_app_ug/index
    faq/index
-- 
2.4.3