From: Jason Gerecke <killertofu@gmail.com>
To: linux-input@vger.kernel.org
Cc: Jiri Kosina <jkosina@suse.cz>,
Benjamin Tissoires <benjamin.tissoires@redhat.com>,
Ping Cheng <pinglinux@gmail.com>, Aaron Skomra <skomra@gmail.com>,
expiredpopsicle@gmail.com, Jason Gerecke <killertofu@gmail.com>,
Jason Gerecke <jason.gerecke@wacom.com>
Subject: [PATCH] HID: wacom: Add support for Cintiq Companion 2
Date: Wed, 7 Oct 2015 16:55:44 -0700 [thread overview]
Message-ID: <1444262144-19327-1-git-send-email-killertofu@gmail.com> (raw)
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Clifford Jolly <expiredpopsicle@gmail.com>
---
drivers/hid/wacom_sys.c | 2 +-
drivers/hid/wacom_wac.c | 41 ++++++++++++++++++++++++++++++++++++++++-
drivers/hid/wacom_wac.h | 1 +
3 files changed, 42 insertions(+), 2 deletions(-)
diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c
index 5f6e48e..2e7a1c7 100644
--- a/drivers/hid/wacom_sys.c
+++ b/drivers/hid/wacom_sys.c
@@ -420,7 +420,7 @@ static int wacom_query_tablet_data(struct hid_device *hdev,
/* MT Tablet PC touch */
return wacom_set_device_mode(hdev, 3, 4, 4);
}
- else if (features->type == WACOM_24HDT || features->type == CINTIQ_HYBRID) {
+ else if (features->type == WACOM_24HDT || features->type == CINTIQ_HYBRID || features->type == CINTIQ_COMPANION_2) {
return wacom_set_device_mode(hdev, 18, 3, 2);
}
else if (features->type == WACOM_27QHDT) {
diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c
index 46bd02b..44d4cc3 100644
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -765,7 +765,7 @@ static void wacom_intuos_general(struct wacom_wac *wacom)
/* general pen packet */
if ((data[1] & 0xb8) == 0xa0) {
t = (data[6] << 2) | ((data[7] >> 6) & 3);
- if (features->type >= INTUOS4S && features->type <= CINTIQ_HYBRID) {
+ if (features->type >= INTUOS4S && features->type <= CINTIQ_COMPANION_2) {
t = (t << 1) | (data[1] & 1);
}
input_report_abs(input, ABS_PRESSURE, t);
@@ -948,6 +948,27 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
} else {
input_report_abs(input, ABS_MISC, 0);
}
+
+ } else if (features->type == CINTIQ_COMPANION_2) {
+ input_report_key(input, BTN_1, (data[1] & 0x02));
+ input_report_key(input, BTN_2, (data[2] & 0x01));
+ input_report_key(input, BTN_3, (data[2] & 0x02));
+ input_report_key(input, BTN_4, (data[2] & 0x04));
+ input_report_key(input, BTN_5, (data[2] & 0x08));
+ input_report_key(input, BTN_6, (data[1] & 0x04));
+
+ input_report_key(input, BTN_7, (data[2] & 0x10)); /* Right */
+ input_report_key(input, BTN_8, (data[2] & 0x20)); /* Up */
+ input_report_key(input, BTN_9, (data[2] & 0x40)); /* Left */
+ input_report_key(input, BTN_A, (data[2] & 0x80)); /* Down */
+ input_report_key(input, BTN_0, (data[1] & 0x01)); /* Center */
+
+ if (data[4] | (data[3] & 0x01)) {
+ input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
+ } else {
+ input_report_abs(input, ABS_MISC, 0);
+ }
+
} else if (features->type >= INTUOS5S && features->type <= INTUOSPL) {
int i;
@@ -2290,6 +2311,7 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
case WACOM_27QHD:
case DTK:
case CINTIQ_HYBRID:
+ case CINTIQ_COMPANION_2:
sync = wacom_intuos_irq(wacom_wac);
break;
@@ -2543,6 +2565,7 @@ int wacom_setup_pen_input_capabilities(struct input_dev *input_dev,
case CINTIQ:
case WACOM_13HD:
case CINTIQ_HYBRID:
+ case CINTIQ_COMPANION_2:
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
input_abs_set_res(input_dev, ABS_Z, 287);
__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
@@ -2595,6 +2618,12 @@ int wacom_setup_pen_input_capabilities(struct input_dev *input_dev,
__clear_bit(ABS_MISC, input_dev->absbit);
/* fall through */
+ case CINTIQ_COMPANION_2:
+ for (i = 0; i < 10; i++)
+ __set_bit(BTN_0 + i, input_dev->keybit);
+ __set_bit(BTN_A, input_dev->keybit);
+ break;
+
case DTUS:
case DTUSX:
case PL:
@@ -3347,6 +3376,14 @@ static const struct wacom_features wacom_features_0x318 =
static const struct wacom_features wacom_features_0x319 =
{ "Wacom Wireless Bamboo PAD", 4095, 4095, /* Touch */
.type = BAMBOO_PAD, 35, 48, .touch_max = 4 };
+static const struct wacom_features wacom_features_0x325 =
+ { "Wacom ISDv5 325", 59552, 33848, 2047, 63,
+ CINTIQ_COMPANION_2, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+ WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
+ .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x326 };
+static const struct wacom_features wacom_features_0x326 = /* Touch */
+ { "Wacom ISDv5 326", .type = HID_GENERIC, .oVid = USB_VENDOR_ID_WACOM,
+ .oPid = 0x325 };
static const struct wacom_features wacom_features_0x323 =
{ "Wacom Intuos P M", 21600, 13500, 1023, 31,
INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
@@ -3506,6 +3543,8 @@ const struct hid_device_id wacom_ids[] = {
{ USB_DEVICE_WACOM(0x318) },
{ USB_DEVICE_WACOM(0x319) },
{ USB_DEVICE_WACOM(0x323) },
+ { USB_DEVICE_WACOM(0x325) },
+ { USB_DEVICE_WACOM(0x326) },
{ USB_DEVICE_WACOM(0x32A) },
{ USB_DEVICE_WACOM(0x32B) },
{ USB_DEVICE_WACOM(0x32C) },
diff --git a/drivers/hid/wacom_wac.h b/drivers/hid/wacom_wac.h
index 809c03e..5a1ec76 100644
--- a/drivers/hid/wacom_wac.h
+++ b/drivers/hid/wacom_wac.h
@@ -124,6 +124,7 @@ enum {
WACOM_24HD,
WACOM_27QHD,
CINTIQ_HYBRID,
+ CINTIQ_COMPANION_2,
CINTIQ,
WACOM_BEE,
WACOM_13HD,
--
2.6.1
next reply other threads:[~2015-10-07 23:56 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-07 23:55 Jason Gerecke [this message]
2015-10-08 0:59 ` [PATCH] HID: wacom: Add support for Cintiq Companion 2 Bastien Nocera
2015-10-08 2:31 ` Cliff Jolly
2015-10-08 18:28 ` [PATCH v2] " Jason Gerecke
2015-10-11 23:02 ` Jiri Kosina
2015-10-12 16:23 ` Jason Gerecke
2015-10-13 17:03 ` [PATCH v3] " Jason Gerecke
2015-10-21 9:21 ` Jiri Kosina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1444262144-19327-1-git-send-email-killertofu@gmail.com \
--to=killertofu@gmail.com \
--cc=benjamin.tissoires@redhat.com \
--cc=expiredpopsicle@gmail.com \
--cc=jason.gerecke@wacom.com \
--cc=jkosina@suse.cz \
--cc=linux-input@vger.kernel.org \
--cc=pinglinux@gmail.com \
--cc=skomra@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.