[PATCH v3 3/3] PCI: imx6: Use the common LTSSM state mask

[Fabio Estevam <festevam@gmail.com>]

From: Fabio Estevam <fabio.estevam@freescale.com>

Use the common LTSSM_STATE_MASK instead of a local definition.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
Changes since v2:
- Newly introduced in this version.

 drivers/pci/host/pci-imx6.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
index 4e7b577..4c788d27 100644
--- a/drivers/pci/host/pci-imx6.c
+++ b/drivers/pci/host/pci-imx6.c
@@ -55,7 +55,6 @@ struct imx6_pcie {
 #define PCIE_PL_PFLR_LINK_STATE_MASK		(0x3f << 16)
 #define PCIE_PL_PFLR_FORCE_LINK			(1 << 15)
 #define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28)
-#define PCIE_PHY_DEBUG_R0_LTSSM_MASK		(0x3f << 0)
 #define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c)
 #define PCIE_PHY_DEBUG_R1_XMLH_LINK_IN_TRAINING	(1 << 29)
 #define PCIE_PHY_DEBUG_R1_XMLH_LINK_UP		(1 << 4)
@@ -508,7 +507,7 @@ static int imx6_pcie_link_up(struct pcie_port *pp)
 	if (rx_valid & PCIE_PHY_RX_ASIC_OUT_VALID)
 		return 0;
 
-	if ((debug_r0 & PCIE_PHY_DEBUG_R0_LTSSM_MASK) != LTSSM_STATE_RCVRY_LOCK)
+	if ((debug_r0 & LTSSM_STATE_MASK) != LTSSM_STATE_RCVRY_LOCK)
 		return 0;
 
 	dev_err(pp->dev, "transition to gen2 is stuck, reset PHY!\n");
-- 
1.9.1