All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: smfrench@gmail.com, gregkh@linuxfoundation.org, jmcd@samba.org,
	noel.power@suse.com, steve.french@primarydata.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "[SMB3] Fix sec=krb5 on smb3 mounts" has been added to the 4.1-stable tree
Date: Sat, 17 Oct 2015 13:17:38 -0700	[thread overview]
Message-ID: <1445113058237120@kroah.com> (raw)


This is a note to let you know that I've just added the patch titled

    [SMB3] Fix sec=krb5 on smb3 mounts

to the 4.1-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     fix-sec-krb5-on-smb3-mounts.patch
and it can be found in the queue-4.1 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From ceb1b0b9b4d1089e9f2731a314689ae17784c861 Mon Sep 17 00:00:00 2001
From: Steve French <smfrench@gmail.com>
Date: Thu, 24 Sep 2015 00:52:37 -0500
Subject: [SMB3] Fix sec=krb5 on smb3 mounts

From: Steve French <smfrench@gmail.com>

commit ceb1b0b9b4d1089e9f2731a314689ae17784c861 upstream.

Kerberos, which is very important for security, was only enabled for
CIFS not SMB2/SMB3 mounts (e.g. vers=3.0)

Patch based on the information detailed in
http://thread.gmane.org/gmane.linux.kernel.cifs/10081/focus=10307
to enable Kerberized SMB2/SMB3

a) SMB2_negotiate: enable/use decode_negTokenInit in SMB2_negotiate
b) SMB2_sess_setup: handle Kerberos sectype and replicate Kerberos
   SMB1 processing done in sess_auth_kerberos

Signed-off-by: Noel Power <noel.power@suse.com>
Signed-off-by: Jim McDonough <jmcd@samba.org>
Signed-off-by: Steve French <steve.french@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/smb2pdu.c |   76 +++++++++++++++++++++++++++++++++++++++++++-----------
 1 file changed, 61 insertions(+), 15 deletions(-)

--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -46,6 +46,7 @@
 #include "smb2status.h"
 #include "smb2glob.h"
 #include "cifspdu.h"
+#include "cifs_spnego.h"
 
 /*
  *  The following table defines the expected "StructureSize" of SMB2 requests
@@ -427,19 +428,15 @@ SMB2_negotiate(const unsigned int xid, s
 		cifs_dbg(FYI, "missing security blob on negprot\n");
 
 	rc = cifs_enable_signing(server, ses->sign);
-#ifdef CONFIG_SMB2_ASN1  /* BB REMOVEME when updated asn1.c ready */
 	if (rc)
 		goto neg_exit;
-	if (blob_length)
+	if (blob_length) {
 		rc = decode_negTokenInit(security_blob, blob_length, server);
-	if (rc == 1)
-		rc = 0;
-	else if (rc == 0) {
-		rc = -EIO;
-		goto neg_exit;
+		if (rc == 1)
+			rc = 0;
+		else if (rc == 0)
+			rc = -EIO;
 	}
-#endif
-
 neg_exit:
 	free_rsp_buf(resp_buftype, rsp);
 	return rc;
@@ -533,7 +530,8 @@ SMB2_sess_setup(const unsigned int xid,
 	__le32 phase = NtLmNegotiate; /* NTLMSSP, if needed, is multistage */
 	struct TCP_Server_Info *server = ses->server;
 	u16 blob_length = 0;
-	char *security_blob;
+	struct key *spnego_key = NULL;
+	char *security_blob = NULL;
 	char *ntlmssp_blob = NULL;
 	bool use_spnego = false; /* else use raw ntlmssp */
 
@@ -561,7 +559,8 @@ SMB2_sess_setup(const unsigned int xid,
 	ses->ntlmssp->sesskey_per_smbsess = true;
 
 	/* FIXME: allow for other auth types besides NTLMSSP (e.g. krb5) */
-	ses->sectype = RawNTLMSSP;
+	if (ses->sectype != Kerberos && ses->sectype != RawNTLMSSP)
+		ses->sectype = RawNTLMSSP;
 
 ssetup_ntlmssp_authenticate:
 	if (phase == NtLmChallenge)
@@ -590,7 +589,48 @@ ssetup_ntlmssp_authenticate:
 	iov[0].iov_base = (char *)req;
 	/* 4 for rfc1002 length field and 1 for pad */
 	iov[0].iov_len = get_rfc1002_length(req) + 4 - 1;
-	if (phase == NtLmNegotiate) {
+
+	if (ses->sectype == Kerberos) {
+#ifdef CONFIG_CIFS_UPCALL
+		struct cifs_spnego_msg *msg;
+
+		spnego_key = cifs_get_spnego_key(ses);
+		if (IS_ERR(spnego_key)) {
+			rc = PTR_ERR(spnego_key);
+			spnego_key = NULL;
+			goto ssetup_exit;
+		}
+
+		msg = spnego_key->payload.data;
+		/*
+		 * check version field to make sure that cifs.upcall is
+		 * sending us a response in an expected form
+		 */
+		if (msg->version != CIFS_SPNEGO_UPCALL_VERSION) {
+			cifs_dbg(VFS,
+				  "bad cifs.upcall version. Expected %d got %d",
+				  CIFS_SPNEGO_UPCALL_VERSION, msg->version);
+			rc = -EKEYREJECTED;
+			goto ssetup_exit;
+		}
+		ses->auth_key.response = kmemdup(msg->data, msg->sesskey_len,
+						 GFP_KERNEL);
+		if (!ses->auth_key.response) {
+			cifs_dbg(VFS,
+				"Kerberos can't allocate (%u bytes) memory",
+				msg->sesskey_len);
+			rc = -ENOMEM;
+			goto ssetup_exit;
+		}
+		ses->auth_key.len = msg->sesskey_len;
+		blob_length = msg->secblob_len;
+		iov[1].iov_base = msg->data + msg->sesskey_len;
+		iov[1].iov_len = blob_length;
+#else
+		rc = -EOPNOTSUPP;
+		goto ssetup_exit;
+#endif /* CONFIG_CIFS_UPCALL */
+	} else if (phase == NtLmNegotiate) { /* if not krb5 must be ntlmssp */
 		ntlmssp_blob = kmalloc(sizeof(struct _NEGOTIATE_MESSAGE),
 				       GFP_KERNEL);
 		if (ntlmssp_blob == NULL) {
@@ -613,6 +653,8 @@ ssetup_ntlmssp_authenticate:
 			/* with raw NTLMSSP we don't encapsulate in SPNEGO */
 			security_blob = ntlmssp_blob;
 		}
+		iov[1].iov_base = security_blob;
+		iov[1].iov_len = blob_length;
 	} else if (phase == NtLmAuthenticate) {
 		req->hdr.SessionId = ses->Suid;
 		ntlmssp_blob = kzalloc(sizeof(struct _NEGOTIATE_MESSAGE) + 500,
@@ -640,6 +682,8 @@ ssetup_ntlmssp_authenticate:
 		} else {
 			security_blob = ntlmssp_blob;
 		}
+		iov[1].iov_base = security_blob;
+		iov[1].iov_len = blob_length;
 	} else {
 		cifs_dbg(VFS, "illegal ntlmssp phase\n");
 		rc = -EIO;
@@ -651,8 +695,6 @@ ssetup_ntlmssp_authenticate:
 				cpu_to_le16(sizeof(struct smb2_sess_setup_req) -
 					    1 /* pad */ - 4 /* rfc1001 len */);
 	req->SecurityBufferLength = cpu_to_le16(blob_length);
-	iov[1].iov_base = security_blob;
-	iov[1].iov_len = blob_length;
 
 	inc_rfc1001_len(req, blob_length - 1 /* pad */);
 
@@ -663,6 +705,7 @@ ssetup_ntlmssp_authenticate:
 
 	kfree(security_blob);
 	rsp = (struct smb2_sess_setup_rsp *)iov[0].iov_base;
+	ses->Suid = rsp->hdr.SessionId;
 	if (resp_buftype != CIFS_NO_BUFFER &&
 	    rsp->hdr.Status == STATUS_MORE_PROCESSING_REQUIRED) {
 		if (phase != NtLmNegotiate) {
@@ -680,7 +723,6 @@ ssetup_ntlmssp_authenticate:
 		/* NTLMSSP Negotiate sent now processing challenge (response) */
 		phase = NtLmChallenge; /* process ntlmssp challenge */
 		rc = 0; /* MORE_PROCESSING is not an error here but expected */
-		ses->Suid = rsp->hdr.SessionId;
 		rc = decode_ntlmssp_challenge(rsp->Buffer,
 				le16_to_cpu(rsp->SecurityBufferLength), ses);
 	}
@@ -737,6 +779,10 @@ keygen_exit:
 		kfree(ses->auth_key.response);
 		ses->auth_key.response = NULL;
 	}
+	if (spnego_key) {
+		key_invalidate(spnego_key);
+		key_put(spnego_key);
+	}
 	kfree(ses->ntlmssp);
 
 	return rc;


Patches currently in stable-queue which might be from smfrench@gmail.com are

queue-4.1/do-not-fall-back-to-smbwritex-in-set_file_size-error-cases.patch
queue-4.1/fix-sec-krb5-on-smb3-mounts.patch
queue-4.1/disabling-oplocks-leases-via-module-parm-enable_oplocks-broken-for-smb3.patch

                 reply	other threads:[~2015-10-17 20:17 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1445113058237120@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=jmcd@samba.org \
    --cc=noel.power@suse.com \
    --cc=smfrench@gmail.com \
    --cc=stable-commits@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=steve.french@primarydata.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.