Patch "dts: imx6: fix sd card gpio polarity specified in device tree" has been added to the 4.1-stable tree

All of lore.kernel.org
 help / color / mirror / Atom feed

From: <gregkh@linuxfoundation.org>
To: aisheng.dong@freescale.com, fabio.estevam@freescale.com,
	gregkh@linuxfoundation.org, shawnguo@kernel.org,
	ulf.hansson@linaro.org
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "dts: imx6: fix sd card gpio polarity specified in device tree" has been added to the 4.1-stable tree
Date: Sat, 17 Oct 2015 15:04:29 -0700	[thread overview]
Message-ID: <14451194691578@kroah.com> (raw)


This is a note to let you know that I've just added the patch titled

    dts: imx6: fix sd card gpio polarity specified in device tree

to the 4.1-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     dts-imx6-fix-sd-card-gpio-polarity-specified-in-device-tree.patch
and it can be found in the queue-4.1 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 89c1a8cf63f8c69dfddb6e377c04df8b25ab1c88 Mon Sep 17 00:00:00 2001
From: Dong Aisheng <aisheng.dong@freescale.com>
Date: Wed, 22 Jul 2015 20:53:02 +0800
Subject: dts: imx6: fix sd card gpio polarity specified in device tree

From: Dong Aisheng <aisheng.dong@freescale.com>

commit 89c1a8cf63f8c69dfddb6e377c04df8b25ab1c88 upstream.

cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios
should be changed to GPIO_ACTIVE_HIGH.
Otherwise, the SD may not work properly due to wrong polarity inversion
specified in DT after switch to common parsing function mmc_of_parse().

Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 43cb3fd76be7..5111f5170d53 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -305,8 +305,8 @@
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio1 4 0>;
-	wp-gpios = <&gpio1 2 0>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
@@ -314,8 +314,8 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 0>;
-	wp-gpios = <&gpio7 1 0>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index 78df05e9d1ce..d6515f7a56c4 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -11,6 +11,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "imx6q.dtsi"
 
 / {
@@ -196,8 +197,8 @@
 };
 
 &usdhc3 {
-	cd-gpios = <&gpio6 11 0>;
-	wp-gpios = <&gpio6 14 0>;
+	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3
diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts
index 703539cf36d3..00bd63e63d0c 100644
--- a/arch/arm/boot/dts/imx6q-gk802.dts
+++ b/arch/arm/boot/dts/imx6q-gk802.dts
@@ -7,6 +7,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "imx6q.dtsi"
 
 / {
@@ -161,7 +162,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <4>;
-	cd-gpios = <&gpio6 11 0>;
+	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts
index a43abfa21e33..5645d52850a7 100644
--- a/arch/arm/boot/dts/imx6q-tbs2910.dts
+++ b/arch/arm/boot/dts/imx6q-tbs2910.dts
@@ -251,7 +251,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <4>;
-	cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
@@ -260,7 +260,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <4>;
-	cd-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
index e6d9195a1da7..f4d6ae564ead 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
@@ -173,7 +173,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
@@ -181,7 +181,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
index 1d85de2befb3..a47a0399a172 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
@@ -392,7 +392,7 @@
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
 	no-1-8-v;
 	status = "okay";
 };
@@ -400,7 +400,7 @@
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
 	no-1-8-v;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
index 59e5d15e3ec4..ff41f83551de 100644
--- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
@@ -258,6 +258,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>;
 	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio1 4 0>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
index 2c253d6d20bd..45e7c39e80d5 100644
--- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
@@ -1,3 +1,5 @@
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	regulators {
 		compatible = "simple-bus";
@@ -181,7 +183,7 @@
 &usdhc2 { /* module slot */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio2 2 0>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index b5756c21ea1d..4493f6e99330 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -318,7 +318,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 86f03c1b147c..a857d1294609 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -324,7 +324,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index 4a8d97f47759..1afe3385e2d2 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -417,7 +417,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
index 62a82f3eba88..6dd0b764e036 100644
--- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
@@ -299,6 +299,6 @@
 		&pinctrl_hummingboard_usdhc2
 	>;
 	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio1 4 0>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index 3af16dfe417b..d7fe6672d00c 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -453,7 +453,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 0>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
@@ -461,7 +461,7 @@
 &usdhc4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc4>;
-	cd-gpios = <&gpio2 6 0>;
+	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 1ce6133b67f5..9e6ecd99b472 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -409,8 +409,8 @@
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio1 4 0>;
-	wp-gpios = <&gpio1 2 0>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 	status = "disabled";
 };
 
@@ -418,7 +418,7 @@
         pinctrl-names = "default";
         pinctrl-0 = <&pinctrl_usdhc3
 		     &pinctrl_usdhc3_cdwp>;
-        cd-gpios = <&gpio1 27 0>;
-        wp-gpios = <&gpio1 29 0>;
+	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
         status = "disabled";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi
index 488a640796ac..3373fd958e95 100644
--- a/arch/arm/boot/dts/imx6qdl-rex.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi
@@ -342,7 +342,7 @@
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <4>;
 	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -351,6 +351,6 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <4>;
 	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 3b24b12651b2..e329ca5c3322 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -467,8 +467,8 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	cd-gpios = <&gpio6 15 0>;
-	wp-gpios = <&gpio1 13 0>;
+	cd-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index e00c44f6a0df..782379320517 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -448,8 +448,8 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 0>;
-	wp-gpios = <&gpio7 1 0>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
@@ -457,7 +457,7 @@
 &usdhc4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc4>;
-	cd-gpios = <&gpio2 6 0>;
+	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index a626e6dd8022..944eb81cb2b8 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -562,8 +562,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <8>;
-	cd-gpios = <&gpio2 2 0>;
-	wp-gpios = <&gpio2 3 0>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -571,8 +571,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <8>;
-	cd-gpios = <&gpio2 0 0>;
-	wp-gpios = <&gpio2 1 0>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
index f02b80b41d4f..da08de324e9e 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@@ -680,7 +680,7 @@
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	bus-width = <4>;
 	no-1-8-v;
-	cd-gpios = <&gpio7 2 0>;
+	cd-gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
 	fsl,wp-controller;
 	status = "okay";
 };
@@ -690,7 +690,7 @@
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <4>;
 	no-1-8-v;
-	cd-gpios = <&gpio7 3 0>;
+	cd-gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
 	fsl,wp-controller;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index 5fb091675582..9e096d811bed 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -9,6 +9,8 @@
  *
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	regulators {
 		compatible = "simple-bus";
@@ -250,13 +252,13 @@
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 2 0>;
+	cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio3 9 0>;
+	cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index 945887d3fdb3..b84dff2e94ea 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -617,8 +617,8 @@
 	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
 	bus-width = <8>;
-	cd-gpios = <&gpio4 7 0>;
-	wp-gpios = <&gpio4 6 0>;
+	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -627,8 +627,8 @@
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	cd-gpios = <&gpio5 0 0>;
-	wp-gpios = <&gpio4 29 0>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -637,6 +637,6 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	cd-gpios = <&gpio3 22 0>;
+	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
index e3c0b63c2205..115f3fd78971 100644
--- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
@@ -49,7 +49,7 @@
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 	bus-width = <8>;
-	cd-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
 	keep-power-in-suspend;
 	enable-sdio-wakeup;
@@ -61,7 +61,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc4>;
 	bus-width = <8>;
-	cd-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
 	no-1-8-v;
 	keep-power-in-suspend;
 	enable-sdio-wakup;
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
index cef04cef3a80..ac88c3467078 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -293,7 +293,7 @@
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 	bus-width = <8>;
-	cd-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
 	keep-power-in-suspend;
 	enable-sdio-wakeup;
@@ -304,7 +304,7 @@
 &usdhc4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc4>;
-	cd-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio6 21 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };


Patches currently in stable-queue which might be from aisheng.dong@freescale.com are

queue-4.1/dts-imx51-fix-sd-card-gpio-polarity-specified-in-device-tree.patch
queue-4.1/dts-imx6-fix-sd-card-gpio-polarity-specified-in-device-tree.patch
queue-4.1/dts-imx25-fix-sd-card-gpio-polarity-specified-in-device-tree.patch
queue-4.1/dts-imx53-fix-sd-card-gpio-polarity-specified-in-device-tree.patch
queue-4.1/mmc-sdhci-esdhc-imx-fix-cd-regression-for-dt-platform.patch

next             reply	other threads:[~2015-10-17 22:04 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-17 22:04 gregkh [this message]
     [not found] ` <BY1PR0301MB13012D9E9916430C89191291E9240@BY1PR0301MB1301.namprd03.prod.outlook.com>
2015-10-25 21:46   ` Patch "dts: imx6: fix sd card gpio polarity specified in device tree" has been added to the 4.1-stable tree gregkh
2015-10-25 21:57     ` Fabio Estevam
  -- strict thread matches above, loose matches on Subject: below --
2015-11-06 19:12 gregkh

find likely ancestor, descendant, or conflicting patches for this message:
( dfblob:43cb3fd76be dfblob:5111f5170d5 dfblob:78df05e9d1c
dfblob:d6515f7a56c dfblob:703539cf36d dfblob:00bd63e63d0
dfblob:a43abfa21e3 dfblob:5645d52850a dfblob:e6d9195a1da
dfblob:f4d6ae564ea dfblob:1d85de2befb dfblob:a47a0399a17
dfblob:59e5d15e3ec dfblob:ff41f83551d dfblob:2c253d6d20b
dfblob:45e7c39e80d dfblob:b5756c21ea1 dfblob:4493f6e9933
dfblob:86f03c1b147 dfblob:a857d129460 dfblob:4a8d97f4775
dfblob:1afe3385e2d dfblob:62a82f3eba8 dfblob:6dd0b764e03
dfblob:3af16dfe417 dfblob:d7fe6672d00 dfblob:1ce6133b67f
dfblob:9e6ecd99b47 dfblob:488a640796a dfblob:3373fd958e9
dfblob:3b24b12651b dfblob:e329ca5c332 dfblob:e00c44f6a0d
dfblob:78237932051 dfblob:a626e6dd802 dfblob:944eb81cb2b
dfblob:f02b80b41d4 dfblob:da08de324e9 dfblob:5fb09167558
dfblob:9e096d811be dfblob:945887d3fdb dfblob:b84dff2e94e
dfblob:e3c0b63c220 dfblob:115f3fd7897 dfblob:cef04cef3a8
dfblob:ac88c346707 )
 OR (
bs:"Patch "
bs:"dts: imx6: fix sd card gpio polarity specified in device tree"
bs:" has been added to the 4.1-stable tree" )
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=14451194691578@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=aisheng.dong@freescale.com \
    --cc=fabio.estevam@freescale.com \
    --cc=shawnguo@kernel.org \
    --cc=stable-commits@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.