All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Daniel P. Berrange" <berrange@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
	Paolo Bonzini <pbonzini@redhat.com>
Subject: [Qemu-devel] [PULL 4/7] ui: convert VNC startup code to use SocketAddress
Date: Tue, 20 Oct 2015 16:33:59 +0100	[thread overview]
Message-ID: <1445355242-4397-5-git-send-email-berrange@redhat.com> (raw)
In-Reply-To: <1445355242-4397-1-git-send-email-berrange@redhat.com>

The VNC code is currently using QemuOpts to configure the
sockets connections / listeners it needs. Convert it to
use SocketAddress to bring it in line with modern QAPI
based code elsewhere in QEMU.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
---
 ui/vnc.c | 160 +++++++++++++++++++++++++++++++++++----------------------------
 1 file changed, 90 insertions(+), 70 deletions(-)

diff --git a/ui/vnc.c b/ui/vnc.c
index d73966a..1fa0550 100644
--- a/ui/vnc.c
+++ b/ui/vnc.c
@@ -3506,18 +3506,14 @@ void vnc_display_open(const char *id, Error **errp)
 {
     VncDisplay *vs = vnc_display_find(id);
     QemuOpts *opts = qemu_opts_find(&qemu_vnc_opts, id);
-    QemuOpts *sopts, *wsopts;
+    SocketAddress *saddr = NULL, *wsaddr = NULL;
     const char *share, *device_id;
     QemuConsole *con;
     bool password = false;
     bool reverse = false;
     const char *vnc;
-    const char *has_to;
     char *h;
-    bool has_ipv4 = false;
-    bool has_ipv6 = false;
     const char *credid;
-    const char *websocket;
     bool sasl = false;
 #ifdef CONFIG_VNC_SASL
     int saslErr;
@@ -3539,44 +3535,83 @@ void vnc_display_open(const char *id, Error **errp)
         return;
     }
 
-    sopts = qemu_opts_create(&socket_optslist, NULL, 0, &error_abort);
-    wsopts = qemu_opts_create(&socket_optslist, NULL, 0, &error_abort);
-
     h = strrchr(vnc, ':');
     if (h) {
-        char *host;
         size_t hlen = h - vnc;
 
-        if (vnc[0] == '[' && vnc[hlen - 1] == ']') {
-            host = g_strndup(vnc + 1, hlen - 2);
+        const char *websocket = qemu_opt_get(opts, "websocket");
+        int to = qemu_opt_get_number(opts, "to", 0);
+        bool has_ipv4 = qemu_opt_get_bool(opts, "ipv4", false);
+        bool has_ipv6 = qemu_opt_get_bool(opts, "ipv6", false);
+
+        saddr = g_new0(SocketAddress, 1);
+        if (websocket) {
+            if (!qcrypto_hash_supports(QCRYPTO_HASH_ALG_SHA1)) {
+                error_setg(errp,
+                           "SHA1 hash support is required for websockets");
+                goto fail;
+            }
+
+            wsaddr = g_new0(SocketAddress, 1);
+            vs->ws_enabled = true;
+        }
+
+        if (strncmp(vnc, "unix:", 5) == 0) {
+            saddr->kind = SOCKET_ADDRESS_KIND_UNIX;
+            saddr->q_unix = g_new0(UnixSocketAddress, 1);
+            saddr->q_unix->path = g_strdup(vnc + 5);
+
+            if (vs->ws_enabled) {
+                error_setg(errp, "UNIX sockets not supported with websock");
+                goto fail;
+            }
         } else {
-            host = g_strndup(vnc, hlen);
+            unsigned long long baseport;
+            saddr->kind = SOCKET_ADDRESS_KIND_INET;
+            saddr->inet = g_new0(InetSocketAddress, 1);
+            if (vnc[0] == '[' && vnc[hlen - 1] == ']') {
+                saddr->inet->host = g_strndup(vnc + 1, hlen - 2);
+            } else {
+                saddr->inet->host = g_strndup(vnc, hlen);
+            }
+            if (parse_uint_full(h + 1, &baseport, 10) < 0) {
+                error_setg(errp, "can't convert to a number: %s", h + 1);
+                goto fail;
+            }
+            if (baseport > 65535 ||
+                baseport + 5900 > 65535) {
+                error_setg(errp, "port %s out of range", h + 1);
+                goto fail;
+            }
+            saddr->inet->port = g_strdup_printf(
+                "%d", (int)baseport + 5900);
+
+            if (to) {
+                saddr->inet->has_to = true;
+                saddr->inet->to = to;
+            }
+            saddr->inet->ipv4 = saddr->inet->has_ipv4 = has_ipv4;
+            saddr->inet->ipv6 = saddr->inet->has_ipv6 = has_ipv6;
+
+            if (vs->ws_enabled) {
+                wsaddr->kind = SOCKET_ADDRESS_KIND_INET;
+                wsaddr->inet = g_new0(InetSocketAddress, 1);
+                wsaddr->inet->host = g_strdup(saddr->inet->host);
+                wsaddr->inet->port = g_strdup(websocket);
+
+                if (to) {
+                    wsaddr->inet->has_to = true;
+                    wsaddr->inet->to = to;
+                }
+                wsaddr->inet->ipv4 = wsaddr->inet->has_ipv4 = has_ipv4;
+                wsaddr->inet->ipv6 = wsaddr->inet->has_ipv6 = has_ipv6;
+            }
         }
-        qemu_opt_set(sopts, "host", host, &error_abort);
-        qemu_opt_set(wsopts, "host", host, &error_abort);
-        qemu_opt_set(sopts, "port", h+1, &error_abort);
-        g_free(host);
     } else {
         error_setg(errp, "no vnc port specified");
         goto fail;
     }
 
-    has_to = qemu_opt_get(opts, "to");
-    has_ipv4 = qemu_opt_get_bool(opts, "ipv4", false);
-    has_ipv6 = qemu_opt_get_bool(opts, "ipv6", false);
-    if (has_to) {
-        qemu_opt_set(sopts, "to", has_to, &error_abort);
-        qemu_opt_set(wsopts, "to", has_to, &error_abort);
-    }
-    if (has_ipv4) {
-        qemu_opt_set(sopts, "ipv4", "on", &error_abort);
-        qemu_opt_set(wsopts, "ipv4", "on", &error_abort);
-    }
-    if (has_ipv6) {
-        qemu_opt_set(sopts, "ipv6", "on", &error_abort);
-        qemu_opt_set(wsopts, "ipv6", "on", &error_abort);
-    }
-
     password = qemu_opt_get_bool(opts, "password", false);
     if (password) {
         if (fips_get_state()) {
@@ -3682,16 +3717,6 @@ void vnc_display_open(const char *id, Error **errp)
     }
     vs->connections_limit = qemu_opt_get_number(opts, "connections", 32);
 
-    websocket = qemu_opt_get(opts, "websocket");
-    if (websocket) {
-        vs->ws_enabled = true;
-        qemu_opt_set(wsopts, "port", websocket, &error_abort);
-        if (!qcrypto_hash_supports(QCRYPTO_HASH_ALG_SHA1)) {
-            error_setg(errp, "SHA1 hash support is required for websockets");
-            goto fail;
-        }
-    }
-
 #ifdef CONFIG_VNC_JPEG
     vs->lossy = qemu_opt_get_bool(opts, "lossy", false);
 #endif
@@ -3725,7 +3750,7 @@ void vnc_display_open(const char *id, Error **errp)
     }
 #endif
 
-    if (vnc_display_setup_auth(vs, password, sasl, websocket, errp) < 0) {
+    if (vnc_display_setup_auth(vs, password, sasl, vs->ws_enabled, errp) < 0) {
         goto fail;
     }
 
@@ -3770,37 +3795,31 @@ void vnc_display_open(const char *id, Error **errp)
         int csock;
         vs->lsock = -1;
         vs->lwebsock = -1;
-        if (strncmp(vnc, "unix:", 5) == 0) {
-            csock = unix_connect(vnc+5, errp);
-        } else {
-            csock = inet_connect(vnc, errp);
+        if (vs->ws_enabled) {
+            error_setg(errp, "Cannot use websockets in reverse mode");
+            goto fail;
         }
+        csock = socket_connect(saddr, errp, NULL, NULL);
         if (csock < 0) {
             goto fail;
         }
+        vs->is_unix = saddr->kind == SOCKET_ADDRESS_KIND_UNIX;
         vnc_connect(vs, csock, false, false);
     } else {
         /* listen for connects */
-        if (strncmp(vnc, "unix:", 5) == 0) {
-            vs->lsock = unix_listen(vnc+5, NULL, 0, errp);
-            if (vs->lsock < 0) {
-                goto fail;
-            }
-            vs->is_unix = true;
-        } else {
-            vs->lsock = inet_listen_opts(sopts, 5900, errp);
-            if (vs->lsock < 0) {
-                goto fail;
-            }
-            if (vs->ws_enabled) {
-                vs->lwebsock = inet_listen_opts(wsopts, 0, errp);
-                if (vs->lwebsock < 0) {
-                    if (vs->lsock != -1) {
-                        close(vs->lsock);
-                        vs->lsock = -1;
-                    }
-                    goto fail;
+        vs->lsock = socket_listen(saddr, errp);
+        if (vs->lsock < 0) {
+            goto fail;
+        }
+        vs->is_unix = saddr->kind == SOCKET_ADDRESS_KIND_UNIX;
+        if (vs->ws_enabled) {
+            vs->lwebsock = socket_listen(wsaddr, errp);
+            if (vs->lwebsock < 0) {
+                if (vs->lsock != -1) {
+                    close(vs->lsock);
+                    vs->lsock = -1;
                 }
+                goto fail;
             }
         }
         vs->enabled = true;
@@ -3810,13 +3829,14 @@ void vnc_display_open(const char *id, Error **errp)
                                 NULL, vs);
         }
     }
-    qemu_opts_del(sopts);
-    qemu_opts_del(wsopts);
+
+    qapi_free_SocketAddress(saddr);
+    qapi_free_SocketAddress(wsaddr);
     return;
 
 fail:
-    qemu_opts_del(sopts);
-    qemu_opts_del(wsopts);
+    qapi_free_SocketAddress(saddr);
+    qapi_free_SocketAddress(wsaddr);
     vs->enabled = false;
     vs->ws_enabled = false;
 }
-- 
2.4.3

  parent reply	other threads:[~2015-10-20 15:34 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-20 15:33 [Qemu-devel] [PULL 0/7] Misc refactoring to util codebase Daniel P. Berrange
2015-10-20 15:33 ` [Qemu-devel] [PULL 1/7] sockets: add helpers for creating SocketAddress from a socket Daniel P. Berrange
2015-10-20 15:33 ` [Qemu-devel] [PULL 2/7] sockets: move qapi_copy_SocketAddress into qemu-sockets.c Daniel P. Berrange
2015-10-20 15:33 ` [Qemu-devel] [PULL 3/7] sockets: allow port to be NULL when listening on IP address Daniel P. Berrange
2015-10-20 15:33 ` Daniel P. Berrange [this message]
2015-10-20 15:34 ` [Qemu-devel] [PULL 5/7] osdep: add qemu_fork() wrapper for safely handling signals Daniel P. Berrange
2015-10-20 15:34 ` [Qemu-devel] [PULL 6/7] coroutine: move into libqemuutil.a library Daniel P. Berrange
2015-10-20 15:34 ` [Qemu-devel] [PULL 7/7] util: pull Buffer code out of VNC module Daniel P. Berrange
2015-10-20 15:38 ` [Qemu-devel] [PULL 0/7] Misc refactoring to util codebase Peter Maydell
2015-10-20 15:38 ` Daniel P. Berrange
2015-10-21 12:27   ` Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1445355242-4397-5-git-send-email-berrange@redhat.com \
    --to=berrange@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.