From: heiko@sntech.de (Heiko Stübner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 01/11] clk: divider: add CLK_DIVIDER_READ_ONLY flag
Date: Wed, 07 May 2014 23:10:22 +0200 [thread overview]
Message-ID: <1445808.WceTxW3oRk@diego> (raw)
In-Reply-To: <3477211.Gkyeur83TV@diego>
Similar to muxes which already have a read-only flag there sometimes
exist dividers which should not be changed by the clock framework
but whose value still should be readable.
Therefore add a READ_ONLY flag similar to the mux-one to clk-divider
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
drivers/clk/clk-divider.c | 10 +++++++++-
include/linux/clk-provider.h | 4 ++++
2 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index b3c8396..c9343f5 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -361,6 +361,11 @@ const struct clk_ops clk_divider_ops = {
};
EXPORT_SYMBOL_GPL(clk_divider_ops);
+const struct clk_ops clk_divider_ro_ops = {
+ .recalc_rate = clk_divider_recalc_rate,
+};
+EXPORT_SYMBOL_GPL(clk_divider_ro_ops);
+
static struct clk *_register_divider(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
void __iomem *reg, u8 shift, u8 width,
@@ -386,7 +391,10 @@ static struct clk *_register_divider(struct device *dev, const char *name,
}
init.name = name;
- init.ops = &clk_divider_ops;
+ if (clk_divider_flags & CLK_DIVIDER_READ_ONLY)
+ init.ops = &clk_divider_ro_ops;
+ else
+ init.ops = &clk_divider_ops;
init.flags = flags | CLK_IS_BASIC;
init.parent_names = (parent_name ? &parent_name: NULL);
init.num_parents = (parent_name ? 1 : 0);
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 59e2eb5..9c2cf89 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -314,6 +314,8 @@ struct clk_div_table {
* updated to indicate changing divider bits.
* CLK_DIVIDER_ROUND_CLOSEST - Makes the best calculated divider to be rounded
* to the closest integer instead of the up one.
+ * CLK_DIVIDER_READ_ONLY - The divider settings are preconfigured and should
+ * not be changed by the clock framework.
*/
struct clk_divider {
struct clk_hw hw;
@@ -330,8 +332,10 @@ struct clk_divider {
#define CLK_DIVIDER_ALLOW_ZERO BIT(2)
#define CLK_DIVIDER_HIWORD_MASK BIT(3)
#define CLK_DIVIDER_ROUND_CLOSEST BIT(4)
+#define CLK_DIVIDER_READ_ONLY BIT(4)
extern const struct clk_ops clk_divider_ops;
+extern const struct clk_ops clk_divider_ro_ops;
struct clk *clk_register_divider(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
void __iomem *reg, u8 shift, u8 width,
--
1.9.0
next prev parent reply other threads:[~2014-05-07 21:10 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-07 21:09 [PATCH v2 00/11] Add real clock support for Rockchip's RK3188 Heiko Stübner
2014-05-07 21:10 ` Heiko Stübner [this message]
2014-05-16 23:43 ` [PATCH v2 01/11] clk: divider: add CLK_DIVIDER_READ_ONLY flag Tomasz Figa
2014-05-07 21:11 ` [PATCH v2 02/11] clk: rockchip: add basic infrastructure Heiko Stübner
2014-05-07 21:12 ` [PATCH v2 03/11] clk: rockchip: add clock type for pll clocks and pll used on rk3066 Heiko Stübner
2014-05-07 21:12 ` [PATCH v2 04/11] clk: rockchip: add special cpu clock type Heiko Stübner
2014-05-07 21:13 ` [PATCH v2 05/11] clk: rockchip: add reset controller Heiko Stübner
2014-05-07 21:14 ` [PATCH v2 06/11] dt-bindings: add documentation for rk3188 clock and reset unit Heiko Stübner
2014-05-07 21:14 ` Heiko Stübner
2014-05-07 21:14 ` [PATCH v2 07/11] clk: rockchip: add clock driver for rk3188 clocks Heiko Stübner
2014-05-07 21:15 ` [PATCH v2 08/11] ARM: rockchip: Select ARCH_HAS_RESET_CONTROLLER Heiko Stübner
2014-05-07 21:15 ` [PATCH v2 09/11] ARM: dts: rk3188: add cru node and update device clocks to use it Heiko Stübner
2014-05-07 21:15 ` [PATCH v2 10/11] ARM: dts: rockchip: move rk3188 core input clocks into main dtsi Heiko Stübner
2014-05-07 21:16 ` [PATCH v2 11/11] ARM: dts: rockchip: remove the now obsolete rk3188-clocks.dtsi Heiko Stübner
2014-05-19 10:09 ` [PATCH v2 00/11] Add real clock support for Rockchip's RK3188 Max Schwarz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1445808.WceTxW3oRk@diego \
--to=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.