From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Sven Eckelmann Date: Wed, 28 Oct 2015 10:58:00 +0100 Message-Id: <1446026280-21289-1-git-send-email-sven@narfation.org> Subject: [B.A.T.M.A.N.] [PATCH v2] batman-adv: Change ifconfig examples to iproute2 List-Id: The list for a Better Approach To Mobile Ad-hoc Networking List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: b.a.t.m.a.n@lists.open-mesh.org Signed-off-by: Sven Eckelmann --- v2: fixed "NodeA" in NodeB block Documentation/networking/batman-adv.txt | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/Documentation/networking/batman-adv.txt b/Documentation/networking/batman-adv.txt index 58e4904..ff23b75 100644 --- a/Documentation/networking/batman-adv.txt +++ b/Documentation/networking/batman-adv.txt @@ -115,14 +115,17 @@ The "bat0" interface can be used like any other regular inter- face. It needs an IP address which can be either statically con- figured or dynamically (by using DHCP or similar services): -# NodeA: ifconfig bat0 192.168.0.1 -# NodeB: ifconfig bat0 192.168.0.2 +# NodeA: ip link set up dev bat0 +# NodeA: ip addr add 192.168.0.1/24 dev bat0 + +# NodeB: ip link set up dev bat0 +# NodeB: ip addr add 192.168.0.2/24 dev bat0 # NodeB: ping 192.168.0.1 Note: In order to avoid problems remove all IP addresses previ- ously assigned to interfaces now used by batman advanced, e.g. -# ifconfig eth0 0.0.0.0 +# ip addr flush dev eth0 LOGGING/DEBUGGING -- 2.6.2