From: <gregkh@linuxfoundation.org>
To: crope@iki.fi, gregkh@linuxfoundation.org,
hello@markclarkstone.co.uk, mchehab@osg.samsung.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "[media] m88ds3103: use own reg update_bits() implementation" has been added to the 4.2-stable tree
Date: Thu, 05 Nov 2015 16:40:39 -0800 [thread overview]
Message-ID: <1446770439237119@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
[media] m88ds3103: use own reg update_bits() implementation
to the 4.2-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
m88ds3103-use-own-reg-update_bits-implementation.patch
and it can be found in the queue-4.2 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From 56ea37da3b93dfe46cb5c3ee0ee4cc44229ece47 Mon Sep 17 00:00:00 2001
From: Antti Palosaari <crope@iki.fi>
Date: Sat, 3 Oct 2015 18:35:14 -0300
Subject: [media] m88ds3103: use own reg update_bits() implementation
From: Antti Palosaari <crope@iki.fi>
commit 56ea37da3b93dfe46cb5c3ee0ee4cc44229ece47 upstream.
Device stopped to tuning some channels after regmap conversion.
Reason is that regmap_update_bits() works a bit differently for
partially volatile registers than old homemade routine. Return
back to old routine in order to fix issue.
Fixes: 478932b16052f5ded74685d096ae920cd17d6424
Reported-by: Mark Clarkstone <hello@markclarkstone.co.uk>
Tested-by: Mark Clarkstone <hello@markclarkstone.co.uk>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/media/dvb-frontends/m88ds3103.c | 73 ++++++++++++++++++++------------
1 file changed, 47 insertions(+), 26 deletions(-)
--- a/drivers/media/dvb-frontends/m88ds3103.c
+++ b/drivers/media/dvb-frontends/m88ds3103.c
@@ -18,6 +18,27 @@
static struct dvb_frontend_ops m88ds3103_ops;
+/* write single register with mask */
+static int m88ds3103_update_bits(struct m88ds3103_dev *dev,
+ u8 reg, u8 mask, u8 val)
+{
+ int ret;
+ u8 tmp;
+
+ /* no need for read if whole reg is written */
+ if (mask != 0xff) {
+ ret = regmap_bulk_read(dev->regmap, reg, &tmp, 1);
+ if (ret)
+ return ret;
+
+ val &= mask;
+ tmp &= ~mask;
+ val |= tmp;
+ }
+
+ return regmap_bulk_write(dev->regmap, reg, &val, 1);
+}
+
/* write reg val table using reg addr auto increment */
static int m88ds3103_wr_reg_val_tab(struct m88ds3103_dev *dev,
const struct m88ds3103_reg_val *tab, int tab_len)
@@ -394,10 +415,10 @@ static int m88ds3103_set_frontend(struct
u8tmp2 = 0x00; /* 0b00 */
break;
}
- ret = regmap_update_bits(dev->regmap, 0x22, 0xc0, u8tmp1 << 6);
+ ret = m88ds3103_update_bits(dev, 0x22, 0xc0, u8tmp1 << 6);
if (ret)
goto err;
- ret = regmap_update_bits(dev->regmap, 0x24, 0xc0, u8tmp2 << 6);
+ ret = m88ds3103_update_bits(dev, 0x24, 0xc0, u8tmp2 << 6);
if (ret)
goto err;
}
@@ -455,13 +476,13 @@ static int m88ds3103_set_frontend(struct
if (ret)
goto err;
}
- ret = regmap_update_bits(dev->regmap, 0x9d, 0x08, 0x08);
+ ret = m88ds3103_update_bits(dev, 0x9d, 0x08, 0x08);
if (ret)
goto err;
ret = regmap_write(dev->regmap, 0xf1, 0x01);
if (ret)
goto err;
- ret = regmap_update_bits(dev->regmap, 0x30, 0x80, 0x80);
+ ret = m88ds3103_update_bits(dev, 0x30, 0x80, 0x80);
if (ret)
goto err;
}
@@ -498,7 +519,7 @@ static int m88ds3103_set_frontend(struct
switch (dev->cfg->ts_mode) {
case M88DS3103_TS_SERIAL:
case M88DS3103_TS_SERIAL_D7:
- ret = regmap_update_bits(dev->regmap, 0x29, 0x20, u8tmp1);
+ ret = m88ds3103_update_bits(dev, 0x29, 0x20, u8tmp1);
if (ret)
goto err;
u8tmp1 = 0;
@@ -567,11 +588,11 @@ static int m88ds3103_set_frontend(struct
if (ret)
goto err;
- ret = regmap_update_bits(dev->regmap, 0x4d, 0x02, dev->cfg->spec_inv << 1);
+ ret = m88ds3103_update_bits(dev, 0x4d, 0x02, dev->cfg->spec_inv << 1);
if (ret)
goto err;
- ret = regmap_update_bits(dev->regmap, 0x30, 0x10, dev->cfg->agc_inv << 4);
+ ret = m88ds3103_update_bits(dev, 0x30, 0x10, dev->cfg->agc_inv << 4);
if (ret)
goto err;
@@ -625,13 +646,13 @@ static int m88ds3103_init(struct dvb_fro
dev->warm = false;
/* wake up device from sleep */
- ret = regmap_update_bits(dev->regmap, 0x08, 0x01, 0x01);
+ ret = m88ds3103_update_bits(dev, 0x08, 0x01, 0x01);
if (ret)
goto err;
- ret = regmap_update_bits(dev->regmap, 0x04, 0x01, 0x00);
+ ret = m88ds3103_update_bits(dev, 0x04, 0x01, 0x00);
if (ret)
goto err;
- ret = regmap_update_bits(dev->regmap, 0x23, 0x10, 0x00);
+ ret = m88ds3103_update_bits(dev, 0x23, 0x10, 0x00);
if (ret)
goto err;
@@ -749,18 +770,18 @@ static int m88ds3103_sleep(struct dvb_fr
utmp = 0x29;
else
utmp = 0x27;
- ret = regmap_update_bits(dev->regmap, utmp, 0x01, 0x00);
+ ret = m88ds3103_update_bits(dev, utmp, 0x01, 0x00);
if (ret)
goto err;
/* sleep */
- ret = regmap_update_bits(dev->regmap, 0x08, 0x01, 0x00);
+ ret = m88ds3103_update_bits(dev, 0x08, 0x01, 0x00);
if (ret)
goto err;
- ret = regmap_update_bits(dev->regmap, 0x04, 0x01, 0x01);
+ ret = m88ds3103_update_bits(dev, 0x04, 0x01, 0x01);
if (ret)
goto err;
- ret = regmap_update_bits(dev->regmap, 0x23, 0x10, 0x10);
+ ret = m88ds3103_update_bits(dev, 0x23, 0x10, 0x10);
if (ret)
goto err;
@@ -992,12 +1013,12 @@ static int m88ds3103_set_tone(struct dvb
}
utmp = tone << 7 | dev->cfg->envelope_mode << 5;
- ret = regmap_update_bits(dev->regmap, 0xa2, 0xe0, utmp);
+ ret = m88ds3103_update_bits(dev, 0xa2, 0xe0, utmp);
if (ret)
goto err;
utmp = 1 << 2;
- ret = regmap_update_bits(dev->regmap, 0xa1, reg_a1_mask, utmp);
+ ret = m88ds3103_update_bits(dev, 0xa1, reg_a1_mask, utmp);
if (ret)
goto err;
@@ -1047,7 +1068,7 @@ static int m88ds3103_set_voltage(struct
voltage_dis ^= dev->cfg->lnb_en_pol;
utmp = voltage_dis << 1 | voltage_sel << 0;
- ret = regmap_update_bits(dev->regmap, 0xa2, 0x03, utmp);
+ ret = m88ds3103_update_bits(dev, 0xa2, 0x03, utmp);
if (ret)
goto err;
@@ -1080,7 +1101,7 @@ static int m88ds3103_diseqc_send_master_
}
utmp = dev->cfg->envelope_mode << 5;
- ret = regmap_update_bits(dev->regmap, 0xa2, 0xe0, utmp);
+ ret = m88ds3103_update_bits(dev, 0xa2, 0xe0, utmp);
if (ret)
goto err;
@@ -1115,12 +1136,12 @@ static int m88ds3103_diseqc_send_master_
} else {
dev_dbg(&client->dev, "diseqc tx timeout\n");
- ret = regmap_update_bits(dev->regmap, 0xa1, 0xc0, 0x40);
+ ret = m88ds3103_update_bits(dev, 0xa1, 0xc0, 0x40);
if (ret)
goto err;
}
- ret = regmap_update_bits(dev->regmap, 0xa2, 0xc0, 0x80);
+ ret = m88ds3103_update_bits(dev, 0xa2, 0xc0, 0x80);
if (ret)
goto err;
@@ -1152,7 +1173,7 @@ static int m88ds3103_diseqc_send_burst(s
}
utmp = dev->cfg->envelope_mode << 5;
- ret = regmap_update_bits(dev->regmap, 0xa2, 0xe0, utmp);
+ ret = m88ds3103_update_bits(dev, 0xa2, 0xe0, utmp);
if (ret)
goto err;
@@ -1194,12 +1215,12 @@ static int m88ds3103_diseqc_send_burst(s
} else {
dev_dbg(&client->dev, "diseqc tx timeout\n");
- ret = regmap_update_bits(dev->regmap, 0xa1, 0xc0, 0x40);
+ ret = m88ds3103_update_bits(dev, 0xa1, 0xc0, 0x40);
if (ret)
goto err;
}
- ret = regmap_update_bits(dev->regmap, 0xa2, 0xc0, 0x80);
+ ret = m88ds3103_update_bits(dev, 0xa2, 0xc0, 0x80);
if (ret)
goto err;
@@ -1435,13 +1456,13 @@ static int m88ds3103_probe(struct i2c_cl
goto err_kfree;
/* sleep */
- ret = regmap_update_bits(dev->regmap, 0x08, 0x01, 0x00);
+ ret = m88ds3103_update_bits(dev, 0x08, 0x01, 0x00);
if (ret)
goto err_kfree;
- ret = regmap_update_bits(dev->regmap, 0x04, 0x01, 0x01);
+ ret = m88ds3103_update_bits(dev, 0x04, 0x01, 0x01);
if (ret)
goto err_kfree;
- ret = regmap_update_bits(dev->regmap, 0x23, 0x10, 0x10);
+ ret = m88ds3103_update_bits(dev, 0x23, 0x10, 0x10);
if (ret)
goto err_kfree;
Patches currently in stable-queue which might be from crope@iki.fi are
queue-4.2/si2168-bounds-check-firmware.patch
queue-4.2/rtl28xxu-fix-control-message-flaws.patch
queue-4.2/m88ds3103-use-own-reg-update_bits-implementation.patch
reply other threads:[~2015-11-06 0:40 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1446770439237119@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=crope@iki.fi \
--cc=hello@markclarkstone.co.uk \
--cc=mchehab@osg.samsung.com \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.