[U-Boot] [PATCH v3 08/17] rockchip: rk3036: Add clock driver

[Lin Huang <hl@rock-chips.com>]

Add a driver for setting up and modifying the various PLLs, peripheral
clocks and mmc clocks on RK3036

Signed-off-by: Lin Huang <hl@rock-chips.com>
---
Changes in v1:
- clean copyright announcement
Changes in v2:
- move some macro to cru_rk3036.h
Changes in v3: None

 arch/arm/include/asm/arch-rockchip/cru_rk3036.h | 168 ++++++++++
 drivers/clk/Makefile                            |   1 +
 drivers/clk/clk_rk3036.c                        | 414 ++++++++++++++++++++++++
 3 files changed, 583 insertions(+)
 create mode 100644 arch/arm/include/asm/arch-rockchip/cru_rk3036.h
 create mode 100644 drivers/clk/clk_rk3036.c

diff --git a/arch/arm/include/asm/arch-rockchip/cru_rk3036.h b/arch/arm/include/asm/arch-rockchip/cru_rk3036.h
new file mode 100644
index 0000000..7ecc8ee
--- /dev/null
+++ b/arch/arm/include/asm/arch-rockchip/cru_rk3036.h
@@ -0,0 +1,168 @@
+/*
+ * (C) Copyright 2015 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+#ifndef _ASM_ARCH_CRU_RK3036_H
+#define _ASM_ARCH_CRU_RK3036_H
+
+#include <common.h>
+
+#define OSC_HZ		(24 * 1000 * 1000)
+
+#define APLL_HZ		(600 * 1000000)
+#define GPLL_HZ		(594 * 1000000)
+
+#define CORE_PERI_HZ	150000000
+#define CORE_ACLK_HZ	300000000
+
+#define CPU_ACLK_HZ	150000000
+#define CPU_HCLK_HZ	300000000
+#define CPU_PCLK_HZ	300000000
+
+#define PERI_ACLK_HZ	148500000
+#define PERI_HCLK_HZ	148500000
+#define PERI_PCLK_HZ	74250000
+
+struct rk3036_cru {
+	struct rk3036_pll {
+		unsigned int con0;
+		unsigned int con1;
+		unsigned int con2;
+		unsigned int con3;
+	} pll[4];
+	unsigned int cru_mode_con;
+	unsigned int cru_clksel_con[35];
+	unsigned int cru_clkgate_con[11];
+	unsigned int reserved;
+	unsigned int cru_glb_srst_fst_value;
+	unsigned int cru_glb_srst_snd_value;
+	unsigned int reserved1[2];
+	unsigned int cru_softrst_con[9];
+	unsigned int cru_misc_con;
+	unsigned int reserved2[2];
+	unsigned int cru_glb_cnt_th;
+	unsigned int cru_sdmmc_con[2];
+	unsigned int cru_sdio_con[2];
+	unsigned int cru_emmc_con[2];
+	unsigned int reserved3;
+	unsigned int cru_rst_st;
+	unsigned int reserved4[0x23];
+	unsigned int cru_pll_mask_con;
+};
+check_member(rk3036_cru, cru_pll_mask_con, 0x01f0);
+
+struct pll_div {
+	u32 refdiv;
+	u32 fbdiv;
+	u32 postdiv1;
+	u32 postdiv2;
+	u32 frac;
+};
+
+enum {
+	/* PLLCON0*/
+	PLL_POSTDIV1_MASK	= 7,
+	PLL_POSTDIV1_SHIFT	= 12,
+	PLL_FBDIV_MASK		= 0xfff,
+	PLL_FBDIV_SHIFT		= 0,
+
+	/* PLLCON1 */
+	PLL_DSMPD_MASK		= 1,
+	PLL_DSMPD_SHIFT		= 12,
+	PLL_LOCK_STATUS_MASK	= 1,
+	PLL_LOCK_STATUS_SHIFT	= 10,
+	PLL_POSTDIV2_MASK	= 7,
+	PLL_POSTDIV2_SHIFT	= 6,
+	PLL_REFDIV_MASK		= 0x3f,
+	PLL_REFDIV_SHIFT	= 0,
+	PLL_RST_SHIFT		= 14,
+
+	/* CRU_MODE */
+	GPLL_MODE_MASK		= 3,
+	GPLL_MODE_SHIFT		= 12,
+	GPLL_MODE_SLOW		= 0,
+	GPLL_MODE_NORM,
+	GPLL_MODE_DEEP,
+	DPLL_MODE_MASK		= 1,
+	DPLL_MODE_SHIFT		= 4,
+	DPLL_MODE_SLOW		= 0,
+	DPLL_MODE_NORM,
+	APLL_MODE_MASK		= 1,
+	APLL_MODE_SHIFT		= 0,
+	APLL_MODE_SLOW		= 0,
+	APLL_MODE_NORM,
+
+	/* CRU_CLK_SEL0_CON */
+	CPU_CLK_PLL_SEL_MASK	= 3,
+	CPU_CLK_PLL_SEL_SHIFT	= 14,
+	CPU_CLK_PLL_SEL_APLL	= 0,
+	CPU_CLK_PLL_SEL_DPLL,
+	CPU_CLK_PLL_SEL_GPLL,
+	ACLK_CPU_DIV_MASK	= 0x1f,
+	ACLK_CPU_DIV_SHIFT	= 8,
+	CORE_CLK_PLL_SEL_MASK	= 1,
+	CORE_CLK_PLL_SEL_SHIFT	= 7,
+	CORE_CLK_PLL_SEL_APLL	= 0,
+	CORE_CLK_PLL_SEL_GPLL,
+	CORE_DIV_CON_MASK	= 0x1f,
+	CORE_DIV_CON_SHIFT	= 0,
+
+	/* CRU_CLK_SEL1_CON */
+	CPU_PCLK_DIV_MASK	= 7,
+	CPU_PCLK_DIV_SHIFT	= 12,
+	CPU_HCLK_DIV_MASK	= 3,
+	CPU_HCLK_DIV_SHIFT	= 8,
+	CORE_ACLK_DIV_MASK	= 7,
+	CORE_ACLK_DIV_SHIFT	= 4,
+	CORE_PERI_DIV_MASK	= 0xf,
+	CORE_PERI_DIV_SHIFT	= 0,
+
+	/* CRU_CLKSEL10_CON */
+	PERI_PLL_SEL_MASK	= 3,
+	PERI_PLL_SEL_SHIFT	= 14,
+	PERI_PLL_APLL		= 0,
+	PERI_PLL_DPLL,
+	PERI_PLL_GPLL,
+	PERI_PCLK_DIV_MASK	= 3,
+	PERI_PCLK_DIV_SHIFT	= 12,
+	PERI_HCLK_DIV_MASK	= 3,
+	PERI_HCLK_DIV_SHIFT	= 8,
+	PERI_ACLK_DIV_MASK	= 0x1f,
+	PERI_ACLK_DIV_SHIFT	= 0,
+
+	/* CRU_CLKSEL11_CON */
+	SDIO_DIV_MASK		= 0x7f,
+	SDIO_DIV_SHIFT		= 8,
+	MMC0_DIV_MASK		= 0x7f,
+	MMC0_DIV_SHIFT		= 0,
+
+	/* CRU_CLKSEL12_CON */
+	EMMC_PLL_MASK		= 3,
+	EMMC_PLL_SHIFT		= 12,
+	EMMC_SEL_APLL		= 0,
+	EMMC_SEL_DPLL,
+	EMMC_SEL_GPLL,
+	EMMC_SEL_24M,
+	SDIO_PLL_MASK		= 3,
+	SDIO_PLL_SHIFT		= 10,
+	SDIO_SEL_APLL		= 0,
+	SDIO_SEL_DPLL,
+	SDIO_SEL_GPLL,
+	SDIO_SEL_24M,
+	MMC0_PLL_MASK		= 3,
+	MMC0_PLL_SHIFT		= 8,
+	MMC0_SEL_APLL		= 0,
+	MMC0_SEL_DPLL,
+	MMC0_SEL_GPLL,
+	MMC0_SEL_24M,
+	EMMC_DIV_MASK		= 0x7f,
+	EMMC_DIV_SHIFT		= 0,
+
+	/* CRU_SOFTRST5_CON */
+	DDRCTRL_PSRST_SHIFT	= 11,
+	DDRCTRL_SRST_SHIFT	= 10,
+	DDRPHY_PSRST_SHIFT	= 9,
+	DDRPHY_SRST_SHIFT	= 8,
+};
+#endif
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 008ec10..4a6a4a8 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -6,5 +6,6 @@
 #
 
 obj-$(CONFIG_CLK) += clk-uclass.o
+obj-$(CONFIG_ROCKCHIP_RK3036) += clk_rk3036.o
 obj-$(CONFIG_ROCKCHIP_RK3288) += clk_rk3288.o
 obj-$(CONFIG_SANDBOX) += clk_sandbox.o
diff --git a/drivers/clk/clk_rk3036.c b/drivers/clk/clk_rk3036.c
new file mode 100644
index 0000000..6c802b6
--- /dev/null
+++ b/drivers/clk/clk_rk3036.c
@@ -0,0 +1,414 @@
+/*
+ * (C) Copyright 2015 Google, Inc
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <errno.h>
+#include <syscon.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/cru_rk3036.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/periph.h>
+#include <dm/lists.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct rk3036_clk_plat {
+	enum rk_clk_id clk_id;
+};
+
+struct rk3036_clk_priv {
+	struct rk3036_cru *cru;
+	ulong rate;
+};
+
+enum {
+	VCO_MAX_HZ	= 2400U * 1000000,
+	VCO_MIN_HZ	= 600 * 1000000,
+	OUTPUT_MAX_HZ	= 2400U * 1000000,
+	OUTPUT_MIN_HZ	= 24 * 1000000,
+};
+
+#define RATE_TO_DIV(input_rate, output_rate) \
+	((input_rate) / (output_rate) - 1);
+
+#define DIV_TO_RATE(input_rate, div)	((input_rate) / ((div) + 1))
+
+#define PLL_DIVISORS(hz, _refdiv, _postdiv1, _postdiv2) {\
+	.refdiv = _refdiv,\
+	.fbdiv = (u32)((u64)hz * _refdiv * _postdiv1 * _postdiv2 / OSC_HZ),\
+	.postdiv1 = _postdiv1, .postdiv2 = _postdiv2};\
+	_Static_assert(((u64)hz * _refdiv * _postdiv1 * _postdiv2 / OSC_HZ) *\
+			 OSC_HZ / (_refdiv * _postdiv1 * _postdiv2) == hz,\
+			 #hz "Hz cannot be hit with PLL "\
+			 "divisors on line " __stringify(__LINE__));
+
+/* use interge mode*/
+static const struct pll_div apll_init_cfg = PLL_DIVISORS(APLL_HZ, 1, 3, 1);
+static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 2, 2, 1);
+
+static inline unsigned int log2(unsigned int value)
+{
+	return fls(value) - 1;
+}
+
+static int rkclk_set_pll(struct rk3036_cru *cru, enum rk_clk_id clk_id,
+			 const struct pll_div *div)
+{
+	int pll_id = rk_pll_id(clk_id);
+	struct rk3036_pll *pll = &cru->pll[pll_id];
+
+	/* All PLLs have same VCO and output frequency range restrictions. */
+	uint vco_hz = OSC_HZ / 1000 * div->fbdiv / div->refdiv * 1000;
+	uint output_hz = vco_hz / div->postdiv1 / div->postdiv2;
+
+	debug("PLL at %p: fbdiv=%d, refdiv=%d, postdiv1=%d, postdiv2=%d,\
+		 vco=%u Hz, output=%u Hz\n",
+			pll, div->fbdiv, div->refdiv, div->postdiv1,
+			div->postdiv2, vco_hz, output_hz);
+	assert(vco_hz >= VCO_MIN_HZ && vco_hz <= VCO_MAX_HZ &&
+	       output_hz >= OUTPUT_MIN_HZ && output_hz <= OUTPUT_MAX_HZ);
+
+	/* use interger mode */
+	rk_clrreg(&pll->con1, 1 << PLL_DSMPD_SHIFT);
+
+	rk_clrsetreg(&pll->con0,
+		     PLL_POSTDIV1_MASK << PLL_POSTDIV1_SHIFT | PLL_FBDIV_MASK,
+		     (div->postdiv1 << PLL_POSTDIV1_SHIFT) | div->fbdiv);
+	rk_clrsetreg(&pll->con1, PLL_POSTDIV2_MASK << PLL_POSTDIV2_SHIFT |
+			PLL_REFDIV_MASK << PLL_REFDIV_SHIFT,
+			(div->postdiv2 << PLL_POSTDIV2_SHIFT |
+			 div->refdiv << PLL_REFDIV_SHIFT));
+
+	/* waiting for pll lock */
+	while (readl(&pll->con1) & (1 << PLL_LOCK_STATUS_SHIFT))
+		udelay(1);
+
+	return 0;
+}
+
+static void rkclk_init(struct rk3036_cru *cru)
+{
+	u32 aclk_div;
+	u32 hclk_div;
+	u32 pclk_div;
+
+	/* pll enter slow-mode */
+	rk_clrsetreg(&cru->cru_mode_con,
+		     GPLL_MODE_MASK << GPLL_MODE_SHIFT |
+		     APLL_MODE_MASK << APLL_MODE_SHIFT,
+		     GPLL_MODE_SLOW << GPLL_MODE_SHIFT |
+		     APLL_MODE_SLOW << APLL_MODE_SHIFT);
+
+	/* init pll */
+	rkclk_set_pll(cru, CLK_ARM, &apll_init_cfg);
+	rkclk_set_pll(cru, CLK_GENERAL, &gpll_init_cfg);
+
+	/*
+	 * select apll as core clock pll source and
+	 * set up dependent divisors for PCLK/HCLK and ACLK clocks.
+	 * core hz : apll = 1:1
+	 */
+	aclk_div = APLL_HZ / CORE_ACLK_HZ - 1;
+	assert((aclk_div + 1) * CORE_ACLK_HZ == APLL_HZ && aclk_div < 0x7);
+
+	pclk_div = APLL_HZ / CORE_PERI_HZ - 1;
+	assert((pclk_div + 1) * CORE_PERI_HZ == APLL_HZ && pclk_div < 0xf);
+
+	rk_clrsetreg(&cru->cru_clksel_con[0],
+		     CORE_CLK_PLL_SEL_MASK << CORE_CLK_PLL_SEL_SHIFT |
+		     CORE_DIV_CON_MASK << CORE_DIV_CON_SHIFT,
+		     CORE_CLK_PLL_SEL_APLL << CORE_CLK_PLL_SEL_SHIFT |
+		     0 << CORE_DIV_CON_SHIFT);
+
+	rk_clrsetreg(&cru->cru_clksel_con[1],
+		     CORE_ACLK_DIV_MASK << CORE_ACLK_DIV_SHIFT |
+		     CORE_PERI_DIV_MASK << CORE_PERI_DIV_SHIFT,
+		     aclk_div << CORE_ACLK_DIV_SHIFT |
+		     pclk_div << CORE_PERI_DIV_SHIFT);
+
+	/*
+	 * select apll as cpu clock pll source and
+	 * set up dependent divisors for PCLK/HCLK and ACLK clocks.
+	 */
+	aclk_div = APLL_HZ / CPU_ACLK_HZ - 1;
+	assert((aclk_div + 1) * CPU_ACLK_HZ == APLL_HZ && aclk_div < 0x1f);
+
+	pclk_div = APLL_HZ / CPU_PCLK_HZ - 1;
+	assert((pclk_div + 1) * CPU_PCLK_HZ == APLL_HZ && pclk_div < 0x7);
+
+	hclk_div = APLL_HZ / CPU_HCLK_HZ - 1;
+	assert((hclk_div + 1) * CPU_HCLK_HZ == APLL_HZ && hclk_div < 0x3);
+
+	rk_clrsetreg(&cru->cru_clksel_con[0],
+		     CPU_CLK_PLL_SEL_MASK << CPU_CLK_PLL_SEL_SHIFT |
+		     ACLK_CPU_DIV_MASK << ACLK_CPU_DIV_SHIFT,
+		     CPU_CLK_PLL_SEL_APLL << CPU_CLK_PLL_SEL_SHIFT |
+		     aclk_div << ACLK_CPU_DIV_SHIFT);
+
+	rk_clrsetreg(&cru->cru_clksel_con[1],
+		     CPU_PCLK_DIV_MASK << CPU_PCLK_DIV_SHIFT |
+		     CPU_HCLK_DIV_MASK << CPU_HCLK_DIV_SHIFT,
+		     pclk_div << CPU_PCLK_DIV_SHIFT |
+		     hclk_div << CPU_HCLK_DIV_SHIFT);
+
+	/*
+	 * select gpll as peri clock pll source and
+	 * set up dependent divisors for PCLK/HCLK and ACLK clocks.
+	 */
+	aclk_div = GPLL_HZ / PERI_ACLK_HZ - 1;
+	assert((aclk_div + 1) * PERI_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f);
+
+	hclk_div = log2(PERI_ACLK_HZ / PERI_HCLK_HZ);
+	assert((1 << hclk_div) * PERI_HCLK_HZ ==
+		PERI_ACLK_HZ && (pclk_div < 0x4));
+
+	pclk_div = log2(PERI_ACLK_HZ / PERI_PCLK_HZ);
+	assert((1 << pclk_div) * PERI_PCLK_HZ ==
+		PERI_ACLK_HZ && pclk_div < 0x8);
+
+	rk_clrsetreg(&cru->cru_clksel_con[10],
+		     PERI_PLL_SEL_MASK << PERI_PLL_SEL_SHIFT |
+		     PERI_PCLK_DIV_MASK << PERI_PCLK_DIV_SHIFT |
+		     PERI_HCLK_DIV_MASK << PERI_HCLK_DIV_SHIFT |
+		     PERI_ACLK_DIV_MASK << PERI_ACLK_DIV_SHIFT,
+		     PERI_PLL_GPLL << PERI_PLL_SEL_SHIFT |
+		     pclk_div << PERI_PCLK_DIV_SHIFT |
+		     hclk_div << PERI_HCLK_DIV_SHIFT |
+		     aclk_div << PERI_ACLK_DIV_SHIFT);
+
+	/* PLL enter normal-mode */
+	rk_clrsetreg(&cru->cru_mode_con,
+		     GPLL_MODE_MASK << GPLL_MODE_SHIFT |
+		     APLL_MODE_MASK << APLL_MODE_SHIFT,
+		     GPLL_MODE_NORM << GPLL_MODE_SHIFT |
+		     APLL_MODE_NORM << APLL_MODE_SHIFT);
+}
+
+/* Get pll rate by id */
+static uint32_t rkclk_pll_get_rate(struct rk3036_cru *cru,
+				   enum rk_clk_id clk_id)
+{
+	uint32_t refdiv, fbdiv, postdiv1, postdiv2;
+	uint32_t con;
+	int pll_id = rk_pll_id(clk_id);
+	struct rk3036_pll *pll = &cru->pll[pll_id];
+	static u8 clk_shift[CLK_COUNT] = {
+		0xff, APLL_MODE_SHIFT, DPLL_MODE_SHIFT, 0xff,
+		GPLL_MODE_SHIFT, 0xff
+	};
+	static u8 clk_mask[CLK_COUNT] = {
+		0xff, APLL_MODE_MASK, DPLL_MODE_MASK, 0xff,
+		GPLL_MODE_MASK, 0xff
+	};
+	uint shift;
+	uint mask;
+
+	con = readl(&cru->cru_mode_con);
+	shift = clk_shift[clk_id];
+	mask = clk_mask[clk_id];
+
+	switch ((con >> shift) & mask) {
+	case GPLL_MODE_SLOW:
+		return OSC_HZ;
+	case GPLL_MODE_NORM:
+
+		/* normal mode */
+		con = readl(&pll->con0);
+		postdiv1 = (con >> PLL_POSTDIV1_SHIFT) & PLL_POSTDIV1_MASK;
+		fbdiv = (con >> PLL_FBDIV_SHIFT) & PLL_FBDIV_MASK;
+		con = readl(&pll->con1);
+		postdiv2 = (con >> PLL_POSTDIV2_SHIFT) & PLL_POSTDIV2_MASK;
+		refdiv = (con >> PLL_REFDIV_SHIFT) & PLL_REFDIV_MASK;
+		return (24 * fbdiv / (refdiv * postdiv1 * postdiv2)) * 1000000;
+	case GPLL_MODE_DEEP:
+	default:
+		return 32768;
+	}
+}
+
+static ulong rockchip_mmc_get_clk(struct rk3036_cru *cru, uint clk_general_rate,
+				  enum periph_id periph)
+{
+	uint src_rate;
+	uint div, mux;
+	u32 con;
+
+	switch (periph) {
+	case PERIPH_ID_EMMC:
+		con = readl(&cru->cru_clksel_con[12]);
+		mux = (con >> EMMC_PLL_SHIFT) & EMMC_PLL_MASK;
+		div = (con >> EMMC_DIV_SHIFT) & EMMC_DIV_MASK;
+		break;
+	case PERIPH_ID_SDCARD:
+		con = readl(&cru->cru_clksel_con[12]);
+		mux = (con >> MMC0_PLL_SHIFT) & MMC0_PLL_MASK;
+		div = (con >> MMC0_DIV_SHIFT) & MMC0_DIV_MASK;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	src_rate = mux == EMMC_SEL_24M ? OSC_HZ : clk_general_rate;
+	return DIV_TO_RATE(src_rate, div);
+}
+
+static ulong rockchip_mmc_set_clk(struct rk3036_cru *cru, uint clk_general_rate,
+				  enum periph_id periph, uint freq)
+{
+	int src_clk_div;
+	int mux;
+
+	debug("%s: clk_general_rate=%u\n", __func__, clk_general_rate);
+
+	/* mmc clock auto divide 2 in internal */
+	src_clk_div = (clk_general_rate / 2 + freq - 1) / freq;
+
+	if (src_clk_div > 0x7f) {
+		src_clk_div = (OSC_HZ / 2 + freq - 1) / freq;
+		mux = EMMC_SEL_24M;
+	} else {
+		mux = EMMC_SEL_GPLL;
+	}
+
+	switch (periph) {
+	case PERIPH_ID_EMMC:
+		rk_clrsetreg(&cru->cru_clksel_con[12],
+			     EMMC_PLL_MASK << EMMC_PLL_SHIFT |
+			     EMMC_DIV_MASK << EMMC_DIV_SHIFT,
+			     mux << EMMC_PLL_SHIFT |
+			     (src_clk_div - 1) << EMMC_DIV_SHIFT);
+		break;
+	case PERIPH_ID_SDCARD:
+		rk_clrsetreg(&cru->cru_clksel_con[11],
+			     MMC0_PLL_MASK << MMC0_PLL_SHIFT |
+			     MMC0_DIV_MASK << MMC0_DIV_SHIFT,
+			     mux << MMC0_PLL_SHIFT |
+			     (src_clk_div - 1) << MMC0_DIV_SHIFT);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return rockchip_mmc_get_clk(cru, clk_general_rate, periph);
+}
+
+static ulong rk3036_clk_get_rate(struct udevice *dev)
+{
+	struct rk3036_clk_plat *plat = dev_get_platdata(dev);
+	struct rk3036_clk_priv *priv = dev_get_priv(dev);
+
+	debug("%s\n", dev->name);
+	return rkclk_pll_get_rate(priv->cru, plat->clk_id);
+}
+
+static ulong rk3036_clk_set_rate(struct udevice *dev, ulong rate)
+{
+	debug("%s\n", dev->name);
+
+	return 0;
+}
+
+ulong rk3036_set_periph_rate(struct udevice *dev, int periph, ulong rate)
+{
+	struct rk3036_clk_priv *priv = dev_get_priv(dev);
+	ulong new_rate;
+
+	switch (periph) {
+	case PERIPH_ID_EMMC:
+		new_rate = rockchip_mmc_set_clk(priv->cru, clk_get_rate(dev),
+						periph, rate);
+		break;
+	default:
+		return -ENOENT;
+	}
+
+	return new_rate;
+}
+
+static struct clk_ops rk3036_clk_ops = {
+	.get_rate	= rk3036_clk_get_rate,
+	.set_rate	= rk3036_clk_set_rate,
+	.set_periph_rate = rk3036_set_periph_rate,
+};
+
+static int rk3036_clk_probe(struct udevice *dev)
+{
+	struct rk3036_clk_plat *plat = dev_get_platdata(dev);
+	struct rk3036_clk_priv *priv = dev_get_priv(dev);
+
+	if (plat->clk_id != CLK_OSC) {
+		struct rk3036_clk_priv *parent_priv = dev_get_priv(dev->parent);
+
+		priv->cru = parent_priv->cru;
+		return 0;
+	}
+	priv->cru = (struct rk3036_cru *)dev_get_addr(dev);
+	rkclk_init(priv->cru);
+
+	return 0;
+}
+
+static const char *const clk_name[] = {
+	"osc",
+	"apll",
+	"dpll",
+	"cpll",
+	"gpll",
+	"mpll",
+};
+
+static int rk3036_clk_bind(struct udevice *dev)
+{
+	struct rk3036_clk_plat *plat = dev_get_platdata(dev);
+	int pll, ret;
+
+	/* We only need to set up the root clock */
+	if (dev->of_offset == -1) {
+		plat->clk_id = CLK_OSC;
+		return 0;
+	}
+
+	/* Create devices for P main clocks */
+	for (pll = 1; pll < CLK_COUNT; pll++) {
+		struct udevice *child;
+		struct rk3036_clk_plat *cplat;
+
+		debug("%s %s\n", __func__, clk_name[pll]);
+		ret = device_bind_driver(dev, "clk_rk3036", clk_name[pll],
+					 &child);
+		if (ret)
+			return ret;
+
+		cplat = dev_get_platdata(child);
+		cplat->clk_id = pll;
+	}
+
+	/* The reset driver does not have a device node, so bind it here */
+	ret = device_bind_driver(gd->dm_root, "rk3036_reset", "reset", &dev);
+	if (ret)
+		debug("Warning: No RK3036 reset driver: ret=%d\n", ret);
+
+	return 0;
+}
+
+static const struct udevice_id rk3036_clk_ids[] = {
+	{ .compatible = "rockchip,rk3036-cru" },
+	{ }
+};
+
+U_BOOT_DRIVER(clk_rk3036) = {
+	.name		= "clk_rk3036",
+	.id		= UCLASS_CLK,
+	.of_match	= rk3036_clk_ids,
+	.priv_auto_alloc_size = sizeof(struct rk3036_clk_priv),
+	.platdata_auto_alloc_size = sizeof(struct rk3036_clk_plat),
+	.ops		= &rk3036_clk_ops,
+	.bind		= rk3036_clk_bind,
+	.probe		= rk3036_clk_probe,
+};
-- 
1.9.1