From: Yoshinori Sato <ysato@users.sourceforge.jp>
To: Daniel Lezcano <daniel.lezcano@linaro.org>,
Thomas Gleixner <tglx@linutronix.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>,
linux-kernel@vger.kernel.org
Subject: [PATCH v3] h8300: cleanup startup and remove module code.
Date: Sat, 7 Nov 2015 01:31:44 +0900 [thread overview]
Message-ID: <1446827504-24123-1-git-send-email-ysato@users.sourceforge.jp> (raw)
In-Reply-To: <563C9100.5020806@linaro.org>
h8300's clocksource driver update.
Changes for v2
- Diff base on 6ddcedf38a75f94bf662438afd7ed8c7837ab00e
Changes for v1
- Drop non-initialize changes.
- Private data static allocation.
- Avoid magic number.
- Use request_irq.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
drivers/clocksource/h8300_timer16.c | 141 +++++++++++++--------------------
drivers/clocksource/h8300_timer8.c | 150 ++++++++++++------------------------
drivers/clocksource/h8300_tpu.c | 117 ++++++++++------------------
3 files changed, 144 insertions(+), 264 deletions(-)
diff --git a/drivers/clocksource/h8300_timer16.c b/drivers/clocksource/h8300_timer16.c
index 0e076c6..cdf0d83 100644
--- a/drivers/clocksource/h8300_timer16.c
+++ b/drivers/clocksource/h8300_timer16.c
@@ -17,6 +17,8 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <asm/segment.h>
#include <asm/irq.h>
@@ -47,9 +49,7 @@
#define ABSOLUTE 1
struct timer16_priv {
- struct platform_device *pdev;
struct clocksource cs;
- struct irqaction irqaction;
unsigned long total_cycles;
unsigned long mapbase;
unsigned long mapcommon;
@@ -144,110 +144,77 @@ static void timer16_disable(struct clocksource *cs)
p->cs_enabled = false;
}
+static struct timer16_priv timer16_priv = {
+ .cs = {
+ .name = "h8300_16timer",
+ .rating = 200,
+ .read = timer16_clocksource_read,
+ .enable = timer16_enable,
+ .disable = timer16_disable,
+ .mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ },
+};
+
#define REG_CH 0
#define REG_COMM 1
-static int timer16_setup(struct timer16_priv *p, struct platform_device *pdev)
+static void __init h8300_16timer_init(struct device_node *node)
{
- struct resource *res[2];
+ void __iomem *base[2];
int ret, irq;
unsigned int ch;
+ struct clk *clk;
- p->pdev = pdev;
-
- res[REG_CH] = platform_get_resource(p->pdev,
- IORESOURCE_MEM, REG_CH);
- res[REG_COMM] = platform_get_resource(p->pdev,
- IORESOURCE_MEM, REG_COMM);
- if (!res[REG_CH] || !res[REG_COMM]) {
- dev_err(&p->pdev->dev, "failed to get I/O memory\n");
- return -ENXIO;
- }
- irq = platform_get_irq(p->pdev, 0);
- if (irq < 0) {
- dev_err(&p->pdev->dev, "failed to get irq\n");
- return irq;
+ clk = of_clk_get(node, 0);
+ if (IS_ERR(clk)) {
+ pr_err("failed to get clock for clocksource\n");
+ return;
}
- p->clk = clk_get(&p->pdev->dev, "fck");
- if (IS_ERR(p->clk)) {
- dev_err(&p->pdev->dev, "can't get clk\n");
- return PTR_ERR(p->clk);
+ base[REG_CH] = of_iomap(node, 0);
+ if (!base[REG_CH]) {
+ pr_err("failed to map registers for clocksource\n");
+ goto free_clk;
}
- of_property_read_u32(p->pdev->dev.of_node, "renesas,channel", &ch);
-
- p->pdev = pdev;
- p->mapbase = res[REG_CH]->start;
- p->mapcommon = res[REG_COMM]->start;
- p->enb = 1 << ch;
- p->imfa = 1 << ch;
- p->imiea = 1 << (4 + ch);
- p->cs.name = pdev->name;
- p->cs.rating = 200;
- p->cs.read = timer16_clocksource_read;
- p->cs.enable = timer16_enable;
- p->cs.disable = timer16_disable;
- p->cs.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
- p->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
- ret = request_irq(irq, timer16_interrupt,
- IRQF_TIMER, pdev->name, p);
- if (ret < 0) {
- dev_err(&p->pdev->dev, "failed to request irq %d\n", irq);
- return ret;
+ base[REG_COMM] = of_iomap(node, 1);
+ if (!base[REG_COMM]) {
+ pr_err("failed to map registers for clocksource\n");
+ goto unmap_ch;
}
- clocksource_register_hz(&p->cs, clk_get_rate(p->clk) / 8);
-
- return 0;
-}
-
-static int timer16_probe(struct platform_device *pdev)
-{
- struct timer16_priv *p = platform_get_drvdata(pdev);
-
- if (p) {
- dev_info(&pdev->dev, "kept as earlytimer\n");
- return 0;
+ irq = irq_of_parse_and_map(node, 0);
+ if (irq < 0) {
+ pr_err("failed to get irq for clockevent\n");
+ goto unmap_comm;
}
- p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
- if (!p)
- return -ENOMEM;
+ of_property_read_u32(node, "renesas,channel", &ch);
- return timer16_setup(p, pdev);
-}
+ timer16_priv.mapbase = (unsigned long)base[REG_CH];
+ timer16_priv.mapcommon = (unsigned long)base[REG_COMM];
+ timer16_priv.enb = 1 << ch;
+ timer16_priv.imfa = 1 << ch;
+ timer16_priv.imiea = 1 << (4 + ch);
-static int timer16_remove(struct platform_device *pdev)
-{
- return -EBUSY;
-}
-
-static const struct of_device_id timer16_of_table[] = {
- { .compatible = "renesas,16bit-timer" },
- { }
-};
-static struct platform_driver timer16_driver = {
- .probe = timer16_probe,
- .remove = timer16_remove,
- .driver = {
- .name = "h8300h-16timer",
- .of_match_table = of_match_ptr(timer16_of_table),
+ ret = request_irq(irq, timer16_interrupt,
+ IRQF_TIMER, timer16_priv.cs.name, &timer16_priv);
+ if (ret < 0) {
+ pr_err("failed to request irq %d of clocksource\n", irq);
+ goto unmap_comm;
}
-};
-static int __init timer16_init(void)
-{
- return platform_driver_register(&timer16_driver);
-}
+ clocksource_register_hz(&timer16_priv.cs,
+ clk_get_rate(timer16_priv.clk) / 8);
+ return;
-static void __exit timer16_exit(void)
-{
- platform_driver_unregister(&timer16_driver);
+unmap_comm:
+ iounmap(base[REG_COMM]);
+unmap_ch:
+ iounmap(base[REG_CH]);
+free_clk:
+ clk_put(clk);
}
-subsys_initcall(timer16_init);
-module_exit(timer16_exit);
-MODULE_AUTHOR("Yoshinori Sato");
-MODULE_DESCRIPTION("H8/300H 16bit Timer Driver");
-MODULE_LICENSE("GPL v2");
+CLOCKSOURCE_OF_DECLARE(h8300_16bit, "renesas,16bit-timer", h8300_16timer_init);
diff --git a/drivers/clocksource/h8300_timer8.c b/drivers/clocksource/h8300_timer8.c
index 6998486..5bb4e09 100644
--- a/drivers/clocksource/h8300_timer8.c
+++ b/drivers/clocksource/h8300_timer8.c
@@ -12,13 +12,14 @@
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/init.h>
-#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/clockchips.h>
#include <linux/module.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <asm/irq.h>
@@ -39,10 +40,10 @@
#define RELATIVE 0
#define ABSOLUTE 1
+#define SCALE 64
+
struct timer8_priv {
- struct platform_device *pdev;
struct clock_event_device ced;
- struct irqaction irqaction;
unsigned long mapbase;
raw_spinlock_t lock;
unsigned long flags;
@@ -112,7 +113,7 @@ static void timer8_set_next(struct timer8_priv *p, unsigned long delta)
static int timer8_enable(struct timer8_priv *p)
{
- p->rate = clk_get_rate(p->pclk) / 64;
+ p->rate = clk_get_rate(p->pclk) / SCALE;
ctrl_outw(0xffff, p->mapbase + TCORA);
ctrl_outw(0x0000, p->mapbase + _8TCNT);
ctrl_outw(0x0c02, p->mapbase + _8TCR);
@@ -180,7 +181,7 @@ static int timer8_clock_event_periodic(struct clock_event_device *ced)
{
struct timer8_priv *p = ced_to_priv(ced);
- dev_info(&p->pdev->dev, "used for periodic clock events\n");
+ pr_info("%s: used for periodic clock events\n", ced->name);
timer8_stop(p);
timer8_clock_event_start(p, PERIODIC);
@@ -191,7 +192,7 @@ static int timer8_clock_event_oneshot(struct clock_event_device *ced)
{
struct timer8_priv *p = ced_to_priv(ced);
- dev_info(&p->pdev->dev, "used for oneshot clock events\n");
+ pr_info("%s: used for oneshot clock events\n", ced->name);
timer8_stop(p);
timer8_clock_event_start(p, ONESHOT);
@@ -209,110 +210,61 @@ static int timer8_clock_event_next(unsigned long delta,
return 0;
}
-static int timer8_setup(struct timer8_priv *p,
- struct platform_device *pdev)
+static struct timer8_priv timer8_priv = {
+ .ced = {
+ .name = "h8300_8timer",
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 200,
+ .set_next_event = timer8_clock_event_next,
+ .set_state_shutdown = timer8_clock_event_shutdown,
+ .set_state_periodic = timer8_clock_event_periodic,
+ .set_state_oneshot = timer8_clock_event_oneshot,
+ },
+};
+
+static void __init h8300_8timer_init(struct device_node *node)
{
- struct resource *res;
+ void __iomem *base;
int irq;
- int ret;
+ int ret = 0;
+ int rate;
+ struct clk *clk;
- p->pdev = pdev;
+ clk = of_clk_get(node, 0);
+ if (IS_ERR(clk)) {
+ pr_err("failed to get clock for clockevent\n");
+ return;
+ }
- res = platform_get_resource(p->pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&p->pdev->dev, "failed to get I/O memory\n");
- return -ENXIO;
+ base = of_iomap(node, 0);
+ if (!base) {
+ pr_err("failed to map registers for clockevent\n");
+ goto free_clk;
}
- irq = platform_get_irq(p->pdev, 0);
+ irq = irq_of_parse_and_map(node, 0);
if (irq < 0) {
- dev_err(&p->pdev->dev, "failed to get irq\n");
- return -ENXIO;
+ pr_err("failed to get irq for clockevent\n");
+ goto unmap_reg;
}
- p->mapbase = res->start;
-
- p->irqaction.name = dev_name(&p->pdev->dev);
- p->irqaction.handler = timer8_interrupt;
- p->irqaction.dev_id = p;
- p->irqaction.flags = IRQF_TIMER;
-
- p->pclk = clk_get(&p->pdev->dev, "fck");
- if (IS_ERR(p->pclk)) {
- dev_err(&p->pdev->dev, "can't get clk\n");
- return PTR_ERR(p->pclk);
- }
+ timer8_priv.mapbase = (unsigned long)base;
+ timer8_priv.pclk = clk;
- p->ced.name = pdev->name;
- p->ced.features = CLOCK_EVT_FEAT_PERIODIC |
- CLOCK_EVT_FEAT_ONESHOT;
- p->ced.rating = 200;
- p->ced.cpumask = cpumask_of(0);
- p->ced.set_next_event = timer8_clock_event_next;
- p->ced.set_state_shutdown = timer8_clock_event_shutdown;
- p->ced.set_state_periodic = timer8_clock_event_periodic;
- p->ced.set_state_oneshot = timer8_clock_event_oneshot;
-
- ret = setup_irq(irq, &p->irqaction);
+ ret = request_irq(irq, timer8_interrupt,
+ IRQF_TIMER, timer8_priv.ced.name, &timer8_priv);
if (ret < 0) {
- dev_err(&p->pdev->dev,
- "failed to request irq %d\n", irq);
- return ret;
+ pr_err("failed to request irq %d for clockevent\n", irq);
+ goto unmap_reg;
}
- clockevents_register_device(&p->ced);
- platform_set_drvdata(pdev, p);
-
- return 0;
-}
-
-static int timer8_probe(struct platform_device *pdev)
-{
- struct timer8_priv *p = platform_get_drvdata(pdev);
-
- if (p) {
- dev_info(&pdev->dev, "kept as earlytimer\n");
- return 0;
- }
-
- p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
- if (!p)
- return -ENOMEM;
-
- return timer8_setup(p, pdev);
-}
-
-static int timer8_remove(struct platform_device *pdev)
-{
- return -EBUSY;
-}
-
-static const struct of_device_id timer8_of_table[] __maybe_unused = {
- { .compatible = "renesas,8bit-timer" },
- { }
-};
-
-MODULE_DEVICE_TABLE(of, timer8_of_table);
-static struct platform_driver timer8_driver = {
- .probe = timer8_probe,
- .remove = timer8_remove,
- .driver = {
- .name = "h8300-8timer",
- .of_match_table = of_match_ptr(timer8_of_table),
- }
-};
-
-static int __init timer8_init(void)
-{
- return platform_driver_register(&timer8_driver);
-}
-
-static void __exit timer8_exit(void)
-{
- platform_driver_unregister(&timer8_driver);
+ rate = clk_get_rate(clk) / SCALE;
+ clockevents_config_and_register(&timer8_priv.ced, rate, 1, 0x0000ffff);
+ return;
+
+unmap_reg:
+ iounmap(base);
+free_clk:
+ clk_put(clk);
}
-subsys_initcall(timer8_init);
-module_exit(timer8_exit);
-MODULE_AUTHOR("Yoshinori Sato");
-MODULE_DESCRIPTION("H8/300 8bit Timer Driver");
-MODULE_LICENSE("GPL v2");
+CLOCKSOURCE_OF_DECLARE(h8300_8bit, "renesas,8bit-timer", h8300_8timer_init);
diff --git a/drivers/clocksource/h8300_tpu.c b/drivers/clocksource/h8300_tpu.c
index 5487410..ed0b493 100644
--- a/drivers/clocksource/h8300_tpu.c
+++ b/drivers/clocksource/h8300_tpu.c
@@ -1,5 +1,5 @@
/*
- * H8/300 TPU Driver
+ * H8S TPU Driver
*
* Copyright 2015 Yoshinori Sato <ysato@users.sourcefoge.jp>
*
@@ -17,8 +17,8 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/of.h>
-
-#include <asm/irq.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
#define TCR 0
#define TMDR 1
@@ -32,9 +32,7 @@
#define TGRD 14
struct tpu_priv {
- struct platform_device *pdev;
struct clocksource cs;
- struct clk *clk;
unsigned long mapbase1;
unsigned long mapbase2;
raw_spinlock_t lock;
@@ -116,91 +114,54 @@ static void tpu_clocksource_disable(struct clocksource *cs)
p->cs_enabled = false;
}
+static struct tpu_priv tpu_priv = {
+ .cs = {
+ .name = "H8S_TPU",
+ .rating = 200,
+ .read = tpu_clocksource_read,
+ .enable = tpu_clocksource_enable,
+ .disable = tpu_clocksource_disable,
+ .mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ },
+};
+
#define CH_L 0
#define CH_H 1
-static int __init tpu_setup(struct tpu_priv *p, struct platform_device *pdev)
+static void __init h8300_tpu_init(struct device_node *node)
{
- struct resource *res[2];
-
- p->pdev = pdev;
+ void __iomem *base[2];
+ struct clk *clk;
- res[CH_L] = platform_get_resource(p->pdev, IORESOURCE_MEM, CH_L);
- res[CH_H] = platform_get_resource(p->pdev, IORESOURCE_MEM, CH_H);
- if (!res[CH_L] || !res[CH_H]) {
- dev_err(&p->pdev->dev, "failed to get I/O memory\n");
- return -ENXIO;
+ clk = of_clk_get(node, 0);
+ if (IS_ERR(clk)) {
+ pr_err("failed to get clock for clocksource\n");
+ return;
}
- p->clk = clk_get(&p->pdev->dev, "fck");
- if (IS_ERR(p->clk)) {
- dev_err(&p->pdev->dev, "can't get clk\n");
- return PTR_ERR(p->clk);
+ base[CH_L] = of_iomap(node, CH_L);
+ if (!base[CH_L]) {
+ pr_err("failed to map registers for clocksource\n");
+ goto free_clk;
}
-
- p->mapbase1 = res[CH_L]->start;
- p->mapbase2 = res[CH_H]->start;
-
- p->cs.name = pdev->name;
- p->cs.rating = 200;
- p->cs.read = tpu_clocksource_read;
- p->cs.enable = tpu_clocksource_enable;
- p->cs.disable = tpu_clocksource_disable;
- p->cs.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
- p->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
- clocksource_register_hz(&p->cs, clk_get_rate(p->clk) / 64);
- platform_set_drvdata(pdev, p);
-
- return 0;
-}
-
-static int tpu_probe(struct platform_device *pdev)
-{
- struct tpu_priv *p = platform_get_drvdata(pdev);
-
- if (p) {
- dev_info(&pdev->dev, "kept as earlytimer\n");
- return 0;
+ base[CH_H] = of_iomap(node, CH_H);
+ if (!base[CH_H]) {
+ pr_err("failed to map registers for clocksource\n");
+ goto unmap_L;
}
- p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
- if (!p)
- return -ENOMEM;
+ tpu_priv.mapbase1 = (unsigned long)base[CH_L];
+ tpu_priv.mapbase2 = (unsigned long)base[CH_H];
- return tpu_setup(p, pdev);
-}
+ clocksource_register_hz(&tpu_priv.cs, clk_get_rate(clk) / 64);
-static int tpu_remove(struct platform_device *pdev)
-{
- return -EBUSY;
-}
+ return;
-static const struct of_device_id tpu_of_table[] = {
- { .compatible = "renesas,tpu" },
- { }
-};
-
-static struct platform_driver tpu_driver = {
- .probe = tpu_probe,
- .remove = tpu_remove,
- .driver = {
- .name = "h8s-tpu",
- .of_match_table = of_match_ptr(tpu_of_table),
- }
-};
-
-static int __init tpu_init(void)
-{
- return platform_driver_register(&tpu_driver);
-}
-
-static void __exit tpu_exit(void)
-{
- platform_driver_unregister(&tpu_driver);
+unmap_L:
+ iounmap(base[CH_H]);
+free_clk:
+ clk_put(clk);
}
-subsys_initcall(tpu_init);
-module_exit(tpu_exit);
-MODULE_AUTHOR("Yoshinori Sato");
-MODULE_DESCRIPTION("H8S Timer Pulse Unit Driver");
-MODULE_LICENSE("GPL v2");
+CLOCKSOURCE_OF_DECLARE(h8300_tpu, "renesas,tpu", h8300_tpu_init);
--
2.6.1
next prev parent reply other threads:[~2015-11-06 16:31 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-04 7:35 [PATCH] h8300: Initialize cleanup and remove module code Yoshinori Sato
2015-11-04 13:49 ` Daniel Lezcano
2015-11-06 7:03 ` [PATCH v2] h8300: cleanup startup " Yoshinori Sato
2015-11-06 11:37 ` Daniel Lezcano
2015-11-06 16:31 ` Yoshinori Sato [this message]
2015-11-06 16:42 ` [PATCH v3] " Daniel Lezcano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1446827504-24123-1-git-send-email-ysato@users.sourceforge.jp \
--to=ysato@users.sourceforge.jp \
--cc=daniel.lezcano@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.