From: Wayne Boyer <wayne.boyer@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Subject: [PATCH] drm/i915/skl: implement DP Aux Mutex framework
Date: Mon, 9 Nov 2015 15:35:06 -0800 [thread overview]
Message-ID: <1447112106-20847-1-git-send-email-wayne.boyer@intel.com> (raw)
Beginning with SKL the DP Aux channel communication can be protected
using a built in H/W mutex.
This patch provides an initial implementation for using that mutex.
The use is currently limited to protecting the sink crc request based
on feedback from the H/W designers indicating that using the mutex
for all aux channel communication is not recommended.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Wayne Boyer <wayne.boyer@intel.com>
---
drivers/gpu/drm/i915/i915_drv.h | 1 +
drivers/gpu/drm/i915/i915_reg.h | 5 ++++
drivers/gpu/drm/i915/intel_dp.c | 52 ++++++++++++++++++++++++++++++++++++++++-
3 files changed, 57 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index b12594b..98e991d 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -2604,6 +2604,7 @@ struct drm_i915_cmd_table {
#define HAS_DDI(dev) (INTEL_INFO(dev)->has_ddi)
#define HAS_FPGA_DBG_UNCLAIMED(dev) (INTEL_INFO(dev)->has_fpga_dbg)
+#define HAS_AUX_MUTEX(dev) (INTEL_INFO(dev)->gen >= 9)
#define HAS_PSR(dev) (IS_HASWELL(dev) || IS_BROADWELL(dev) || \
IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev) || \
IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 8942532..a033e70 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4288,6 +4288,11 @@ enum skl_disp_power_wells {
#define DP_AUX_CH_CTL_FW_SYNC_PULSE_SKL(c) (((c) - 1) << 5)
#define DP_AUX_CH_CTL_SYNC_PULSE_SKL(c) ((c) - 1)
+#define DP_AUX_MUTEX_A 0x6402C
+#define DP_AUX_MUTEX_B 0x6412C
+#define DP_AUX_MUTEX_ENABLE (1 << 31)
+#define DP_AUX_MUTEX_STATUS (1 << 30)
+
/*
* Computing GMCH M and N values for the Display Port link
*
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 2fad873..e9e1239 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -781,6 +781,47 @@ static uint32_t skl_get_aux_send_ctl(struct intel_dp *intel_dp,
DP_AUX_CH_CTL_SYNC_PULSE_SKL(32);
}
+static bool skl_aux_mutex(struct intel_dp *intel_dp, bool get)
+{
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = intel_dig_port->base.base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t aux_ch_mutex, status;
+ int count = 0;
+
+ if (!HAS_AUX_MUTEX(dev))
+ return false;
+
+ /*
+ * FIXME: determine actual aux channel
+ * Hard coded to channel A for now to protect sink crc requests on eDP.
+ */
+ aux_ch_mutex = DP_AUX_MUTEX_A;
+
+ if (!get) {
+ I915_WRITE(aux_ch_mutex, DP_AUX_MUTEX_ENABLE | DP_AUX_MUTEX_STATUS);
+ return false;
+ }
+
+ /*
+ * The Bspec specifies waiting 500us between attempts to acquire the
+ * mutex. Ten retries should be adequate to balance successfully
+ * acquirng the mutex and spending too much time trying.
+ */
+ while (count++ < 10) {
+ I915_WRITE(aux_ch_mutex, DP_AUX_MUTEX_ENABLE);
+ status = I915_READ(aux_ch_mutex);
+ if (!(status & DP_AUX_MUTEX_STATUS))
+ return true;
+ udelay(500);
+ }
+
+ return false;
+}
+
+#define skl_aux_mutex_get(dev) skl_aux_mutex(dev, true)
+#define skl_aux_mutex_put(dev) skl_aux_mutex(dev, false)
+
static int
intel_dp_aux_ch(struct intel_dp *intel_dp,
const uint8_t *send, int send_bytes,
@@ -4188,10 +4229,14 @@ int intel_dp_sink_crc(struct intel_dp *intel_dp, u8 *crc)
u8 buf;
int count, ret;
int attempts = 6;
+ bool aux_mutex_acquired = false;
+
+ aux_mutex_acquired = skl_aux_mutex_get(intel_dp);
ret = intel_dp_sink_crc_start(intel_dp);
+
if (ret)
- return ret;
+ goto release;
do {
intel_wait_for_vblank(dev, intel_crtc->pipe);
@@ -4218,6 +4263,11 @@ int intel_dp_sink_crc(struct intel_dp *intel_dp, u8 *crc)
stop:
intel_dp_sink_crc_stop(intel_dp);
+
+release:
+ if (aux_mutex_acquired)
+ aux_mutex_acquired = skl_aux_mutex_put(intel_dp);
+
return ret;
}
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next reply other threads:[~2015-11-09 23:35 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-09 23:35 Wayne Boyer [this message]
2015-11-10 10:51 ` [PATCH] drm/i915/skl: implement DP Aux Mutex framework Jani Nikula
2015-11-10 11:14 ` Dave Airlie
2015-11-10 15:31 ` Vivi, Rodrigo
2015-11-11 0:49 ` Wayne Boyer
-- strict thread matches above, loose matches on Subject: below --
2015-11-11 19:05 [PATCH 5/5] " Rodrigo Vivi
2015-11-12 0:41 ` [PATCH] drm/i915/skl: Implement " Wayne Boyer
2015-11-12 10:16 ` Jani Nikula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1447112106-20847-1-git-send-email-wayne.boyer@intel.com \
--to=wayne.boyer@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=rodrigo.vivi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.