From: Archit Taneja <architt@codeaurora.org>
To: dri-devel@lists.freedesktop.org, robdclark@gmail.com
Cc: linux-arm-msm@vger.kernel.org
Subject: [PATCH 5/6] drm/msm/hdmi: remove CONFIG_OF checks
Date: Wed, 18 Nov 2015 16:49:06 +0530 [thread overview]
Message-ID: <1447845547-6801-6-git-send-email-architt@codeaurora.org> (raw)
In-Reply-To: <1447845547-6801-1-git-send-email-architt@codeaurora.org>
We now only care about kernels that support DT. Remote the non-DT stuff.
While we're at it, use of_device_get_match_data to retrieve match data.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
drivers/gpu/drm/msm/hdmi/hdmi.c | 87 ++++++++---------------------------------
1 file changed, 16 insertions(+), 71 deletions(-)
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index 1f4a95e..9a0989c 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -17,6 +17,8 @@
*/
#include <linux/of_irq.h>
+#include <linux/of_gpio.h>
+
#include "hdmi.h"
void hdmi_set_mode(struct hdmi *hdmi, bool power_on)
@@ -322,8 +324,6 @@ fail:
* The hdmi device:
*/
-#include <linux/of_gpio.h>
-
#define HDMI_CFG(item, entry) \
.item ## _names = item ##_names_ ## entry, \
.item ## _cnt = ARRAY_SIZE(item ## _names_ ## entry)
@@ -388,17 +388,6 @@ static struct hdmi_platform_config hdmi_tx_8996_config = {
.hpd_freq = hpd_clk_freq_8x74,
};
-static const struct of_device_id dt_match[] = {
- { .compatible = "qcom,hdmi-tx-8996", .data = &hdmi_tx_8996_config },
- { .compatible = "qcom,hdmi-tx-8994", .data = &hdmi_tx_8994_config },
- { .compatible = "qcom,hdmi-tx-8084", .data = &hdmi_tx_8084_config },
- { .compatible = "qcom,hdmi-tx-8974", .data = &hdmi_tx_8974_config },
- { .compatible = "qcom,hdmi-tx-8960", .data = &hdmi_tx_8960_config },
- { .compatible = "qcom,hdmi-tx-8660", .data = &hdmi_tx_8660_config },
- {}
-};
-
-#ifdef CONFIG_OF
static int get_gpio(struct device *dev, struct device_node *of_node, const char *name)
{
int gpio = of_get_named_gpio(of_node, name, 0);
@@ -413,7 +402,6 @@ static int get_gpio(struct device *dev, struct device_node *of_node, const char
}
return gpio;
}
-#endif
static int hdmi_bind(struct device *dev, struct device *master, void *data)
{
@@ -421,16 +409,12 @@ static int hdmi_bind(struct device *dev, struct device *master, void *data)
struct msm_drm_private *priv = drm->dev_private;
static struct hdmi_platform_config *hdmi_cfg;
struct hdmi *hdmi;
-#ifdef CONFIG_OF
struct device_node *of_node = dev->of_node;
- const struct of_device_id *match;
- match = of_match_node(dt_match, of_node);
- if (match && match->data) {
- hdmi_cfg = (struct hdmi_platform_config *)match->data;
- DBG("hdmi phy: %s", match->compatible);
- } else {
- dev_err(dev, "unknown phy: %s\n", of_node->name);
+ hdmi_cfg = (struct hdmi_platform_config *)
+ of_device_get_match_data(dev);
+ if (!hdmi_cfg) {
+ dev_err(dev, "unknown hdmi_cfg: %s\n", of_node->name);
return -ENXIO;
}
@@ -443,55 +427,6 @@ static int hdmi_bind(struct device *dev, struct device *master, void *data)
hdmi_cfg->mux_sel_gpio = get_gpio(dev, of_node, "qcom,hdmi-tx-mux-sel");
hdmi_cfg->mux_lpm_gpio = get_gpio(dev, of_node, "qcom,hdmi-tx-mux-lpm");
-#else
- static struct hdmi_platform_config config = {};
- static const char *hpd_clk_names[] = {
- "core_clk", "master_iface_clk", "slave_iface_clk",
- };
- if (cpu_is_apq8064()) {
- static const char *hpd_reg_names[] = {"8921_hdmi_mvs"};
- config.phy_init = hdmi_phy_8960_init;
- config.hpd_reg_names = hpd_reg_names;
- config.hpd_reg_cnt = ARRAY_SIZE(hpd_reg_names);
- config.hpd_clk_names = hpd_clk_names;
- config.hpd_clk_cnt = ARRAY_SIZE(hpd_clk_names);
- config.ddc_clk_gpio = 70;
- config.ddc_data_gpio = 71;
- config.hpd_gpio = 72;
- config.mux_en_gpio = -1;
- config.mux_sel_gpio = -1;
- } else if (cpu_is_msm8960() || cpu_is_msm8960ab()) {
- static const char *hpd_reg_names[] = {"8921_hdmi_mvs"};
- config.phy_init = hdmi_phy_8960_init;
- config.hpd_reg_names = hpd_reg_names;
- config.hpd_reg_cnt = ARRAY_SIZE(hpd_reg_names);
- config.hpd_clk_names = hpd_clk_names;
- config.hpd_clk_cnt = ARRAY_SIZE(hpd_clk_names);
- config.ddc_clk_gpio = 100;
- config.ddc_data_gpio = 101;
- config.hpd_gpio = 102;
- config.mux_en_gpio = -1;
- config.mux_sel_gpio = -1;
- } else if (cpu_is_msm8x60()) {
- static const char *hpd_reg_names[] = {
- "8901_hdmi_mvs", "8901_mpp0"
- };
- config.phy_init = hdmi_phy_8x60_init;
- config.hpd_reg_names = hpd_reg_names;
- config.hpd_reg_cnt = ARRAY_SIZE(hpd_reg_names);
- config.hpd_clk_names = hpd_clk_names;
- config.hpd_clk_cnt = ARRAY_SIZE(hpd_clk_names);
- config.ddc_clk_gpio = 170;
- config.ddc_data_gpio = 171;
- config.hpd_gpio = 172;
- config.mux_en_gpio = -1;
- config.mux_sel_gpio = -1;
- }
- config.mmio_name = "hdmi_msm_hdmi_addr";
- config.qfprom_mmio_name = "hdmi_msm_qfprom_addr";
-
- hdmi_cfg = &config;
-#endif
dev->platform_data = hdmi_cfg;
hdmi = hdmi_init(to_platform_device(dev));
@@ -529,6 +464,16 @@ static int hdmi_dev_remove(struct platform_device *pdev)
return 0;
}
+static const struct of_device_id dt_match[] = {
+ { .compatible = "qcom,hdmi-tx-8996", .data = &hdmi_tx_8996_config },
+ { .compatible = "qcom,hdmi-tx-8994", .data = &hdmi_tx_8994_config },
+ { .compatible = "qcom,hdmi-tx-8084", .data = &hdmi_tx_8084_config },
+ { .compatible = "qcom,hdmi-tx-8974", .data = &hdmi_tx_8974_config },
+ { .compatible = "qcom,hdmi-tx-8960", .data = &hdmi_tx_8960_config },
+ { .compatible = "qcom,hdmi-tx-8660", .data = &hdmi_tx_8660_config },
+ {}
+};
+
static struct platform_driver hdmi_driver = {
.probe = hdmi_dev_probe,
.remove = hdmi_dev_remove,
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2015-11-18 11:19 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-18 11:19 [PATCH 0/6] drm/msm: Work only with DT supported kernels Archit Taneja
2015-11-18 11:19 ` [PATCH 1/6] drm/msm: Remove non-DT code in msm_drv Archit Taneja
2015-11-18 11:19 ` [PATCH 2/6] drm/msm: Update compatible strings for mdp Archit Taneja
2015-11-18 11:19 ` [PATCH 3/6] dt-bindings: drm/msm: Update MDP bindings Archit Taneja
2015-11-18 15:26 ` Archit Taneja
2015-11-18 11:19 ` [PATCH 4/6] drm/msm/mdp: Remove CONFIG_OF checks from MDP drivers Archit Taneja
2015-11-18 11:19 ` Archit Taneja [this message]
2015-11-18 11:19 ` [PATCH 6/6] drm/msm/adreno: Remove CONFIG_OF checks Archit Taneja
2015-11-18 14:45 ` Rob Clark
2015-11-18 16:04 ` Archit Taneja
2015-11-18 20:29 ` Rob Clark
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1447845547-6801-6-git-send-email-architt@codeaurora.org \
--to=architt@codeaurora.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=robdclark@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.