Re: [V2 PATCH 2/2] drm/i915: start adding dp mst audio

[Ander Conselvan De Oliveira <conselvan2@gmail.com>]

On Mon, 2015-11-23 at 10:23 +0800, Libin Yang wrote:
> On 11/19/2015 07:07 PM, Ander Conselvan De Oliveira wrote:
> > (Cc'ing Paulo for the audio power domain question)
> > 
> > On Wed, 2015-11-11 at 13:33 +0800, libin.yang@linux.intel.com wrote:
> > > From: Libin Yang <libin.yang@linux.intel.com>
> > > 
> > > This patch adds support for DP MST audio in i915.
> > > 
> > > Enable audio codec when DP MST is enabled if has_audio flag is set.
> > > Disable audio codec when DP MST is disabled if has_audio flag is set.
> > > 
> > > Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
> > > Signed-off-by: Dave Airlie <airlied@redhat.com>
> > > ---
> > >   drivers/gpu/drm/i915/i915_debugfs.c | 14 ++++++++++++++
> > >   drivers/gpu/drm/i915/intel_audio.c  |  9 ++++++---
> > >   drivers/gpu/drm/i915/intel_dp_mst.c | 25 +++++++++++++++++++++++++
> > >   3 files changed, 45 insertions(+), 3 deletions(-)
> > > 
> > > diff --git a/drivers/gpu/drm/i915/i915_debugfs.c
> > > b/drivers/gpu/drm/i915/i915_debugfs.c
> > > index 5659d4c..38c7a5d 100644
> > > --- a/drivers/gpu/drm/i915/i915_debugfs.c
> > > +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> > > @@ -2873,6 +2873,18 @@ static void intel_dp_info(struct seq_file *m,
> > >   		intel_panel_info(m, &intel_connector->panel);
> > >   }
> > > 
> > > +static void intel_dp_mst_info(struct seq_file *m,
> > > +			  struct intel_connector *intel_connector)
> > > +{
> > > +	struct intel_encoder *intel_encoder = intel_connector->encoder;
> > > +	struct intel_dp_mst_encoder *intel_mst =
> > > +		enc_to_mst(&intel_encoder->base);
> > > +	struct intel_digital_port *intel_dig_port = intel_mst->primary;
> > > +	struct intel_dp *intel_dp = &intel_dig_port->dp;
> > > +
> > > +	seq_printf(m, "\taudio support: %s\n",
> > > drm_dp_mst_port_has_audio(&intel_dp->mst_mgr, intel_connector->port) ?
> > > "yes" :
> > > "no");
> > 
> > Too much going on in just one line. You can replace the ternary operator
> > with
> > yesno(). You could also add a has_audio bool:
> > 
> > bool has_audio = drm_dp_mst_port_has_audio(...);
> > seq_printf(..., yesno(has_audio));
> 
> Get it. Thanks.
> 
> > 
> > 
> > > +}
> > > +
> > >   static void intel_hdmi_info(struct seq_file *m,
> > >   			    struct intel_connector *intel_connector)
> > >   {
> > > @@ -2916,6 +2928,8 @@ static void intel_connector_info(struct seq_file *m,
> > >   			intel_hdmi_info(m, intel_connector);
> > >   		else if (intel_encoder->type == INTEL_OUTPUT_LVDS)
> > >   			intel_lvds_info(m, intel_connector);
> > > +		else if (intel_encoder->type == INTEL_OUTPUT_DP_MST)
> > > +			intel_dp_mst_info(m, intel_connector);
> > >   	}
> > > 
> > >   	seq_printf(m, "\tmodes:\n");
> > > diff --git a/drivers/gpu/drm/i915/intel_audio.c
> > > b/drivers/gpu/drm/i915/intel_audio.c
> > > index 63d4706..07b2aa6 100644
> > > --- a/drivers/gpu/drm/i915/intel_audio.c
> > > +++ b/drivers/gpu/drm/i915/intel_audio.c
> > > @@ -262,7 +262,8 @@ static void hsw_audio_codec_disable(struct
> > > intel_encoder
> > > *encoder)
> > >   	tmp |= AUD_CONFIG_N_PROG_ENABLE;
> > >   	tmp &= ~AUD_CONFIG_UPPER_N_MASK;
> > >   	tmp &= ~AUD_CONFIG_LOWER_N_MASK;
> > > -	if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DISPLAYPORT))
> > > +	if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DISPLAYPORT) ||
> > > +		intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DP_MST))
> > 
> > The second line should be aligned with '('.
> 
> OK, I see.
> 
> > 
> > >   		tmp |= AUD_CONFIG_N_VALUE_INDEX;
> > >   	I915_WRITE(HSW_AUD_CFG(pipe), tmp);
> > > 
> > > @@ -478,7 +479,8 @@ static void ilk_audio_codec_enable(struct
> > > drm_connector
> > > *connector,
> > >   	tmp &= ~AUD_CONFIG_N_VALUE_INDEX;
> > >   	tmp &= ~AUD_CONFIG_N_PROG_ENABLE;
> > >   	tmp &= ~AUD_CONFIG_PIXEL_CLOCK_HDMI_MASK;
> > > -	if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DISPLAYPORT))
> > > +	if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DISPLAYPORT) ||
> > > +		intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DP_MST))
> > 
> > Same here.
> > 
> > >   		tmp |= AUD_CONFIG_N_VALUE_INDEX;
> > >   	else
> > >   		tmp |= audio_config_hdmi_pixel_clock(adjusted_mode);
> > > @@ -516,7 +518,8 @@ void intel_audio_codec_enable(struct intel_encoder
> > > *intel_encoder)
> > > 
> > >   	/* ELD Conn_Type */
> > >   	connector->eld[5] &= ~(3 << 2);
> > > -	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
> > > +	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
> > > +		intel_pipe_has_type(crtc, INTEL_OUTPUT_DP_MST))
> > >   		connector->eld[5] |= (1 << 2);
> > 
> > And here.
> > 
> > > 
> > >   	connector->eld[6] = drm_av_sync_delay(connector, adjusted_mode)
> > > / 2;
> > > diff --git a/drivers/gpu/drm/i915/intel_dp_mst.c
> > > b/drivers/gpu/drm/i915/intel_dp_mst.c
> > > index 0639275..4ded0fb 100644
> > > --- a/drivers/gpu/drm/i915/intel_dp_mst.c
> > > +++ b/drivers/gpu/drm/i915/intel_dp_mst.c
> > > @@ -78,6 +78,8 @@ static bool intel_dp_mst_compute_config(struct
> > > intel_encoder
> > > *encoder,
> > >   		return false;
> > >   	}
> > > 
> > > +	if (drm_dp_mst_port_has_audio(&intel_dp->mst_mgr, found->port))
> > > +		pipe_config->has_audio = true;
> > >   	mst_pbn = drm_dp_calc_pbn_mode(adjusted_mode->crtc_clock, bpp);
> > > 
> > >   	pipe_config->pbn = mst_pbn;
> > > @@ -102,6 +104,11 @@ static void intel_mst_disable_dp(struct intel_encoder
> > > *encoder)
> > >   	struct intel_dp_mst_encoder *intel_mst = enc_to_mst(&encoder
> > > ->base);
> > >   	struct intel_digital_port *intel_dig_port = intel_mst->primary;
> > >   	struct intel_dp *intel_dp = &intel_dig_port->dp;
> > > +	struct drm_device *dev = encoder->base.dev;
> > > +	struct drm_i915_private *dev_priv = dev->dev_private;
> > > +	struct drm_crtc *crtc = encoder->base.crtc;
> > > +	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> > > +
> > >   	int ret;
> > > 
> > >   	DRM_DEBUG_KMS("%d\n", intel_dp->active_mst_links);
> > > @@ -112,6 +119,10 @@ static void intel_mst_disable_dp(struct intel_encoder
> > > *encoder)
> > >   	if (ret) {
> > >   		DRM_ERROR("failed to update payload %d\n", ret);
> > >   	}
> > > +	if (intel_crtc->config->has_audio) {
> > > +		intel_audio_codec_disable(encoder);
> > > +		intel_display_power_put(dev_priv, POWER_DOMAIN_AUDIO);
> > > +	}
> > 
> > It seems the power domain is only need for DDI platforms. Perhaps it would
> > make
> > sense to move that into hsw_audio_codec_{en,dis}able. Paulo?
> > 
> > >   }
> > > 
> > >   static void intel_mst_post_disable_dp(struct intel_encoder *encoder)
> > > @@ -214,6 +225,7 @@ static void intel_mst_enable_dp(struct intel_encoder
> > > *encoder)
> > >   	struct intel_dp *intel_dp = &intel_dig_port->dp;
> > >   	struct drm_device *dev = intel_dig_port->base.base.dev;
> > >   	struct drm_i915_private *dev_priv = dev->dev_private;
> > > +	struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
> > >   	enum port port = intel_dig_port->port;
> > >   	int ret;
> > > 
> > > @@ -226,6 +238,13 @@ static void intel_mst_enable_dp(struct intel_encoder
> > > *encoder)
> > >   	ret = drm_dp_check_act_status(&intel_dp->mst_mgr);
> > > 
> > >   	ret = drm_dp_update_payload_part2(&intel_dp->mst_mgr);
> > > +
> > > +	if (crtc->config->has_audio) {
> > > +		DRM_DEBUG_DRIVER("Enabling DP audio on pipe %c\n",
> > > +				 pipe_name(crtc->pipe));
> > > +		intel_display_power_get(dev_priv, POWER_DOMAIN_AUDIO);
> > > +		intel_audio_codec_enable(encoder);
> > > +	}
> > >   }
> > > 
> > >   static bool intel_dp_mst_enc_get_hw_state(struct intel_encoder *encoder,
> > > @@ -251,6 +270,12 @@ static void intel_dp_mst_enc_get_config(struct
> > > intel_encoder *encoder,
> > > 
> > >   	pipe_config->has_dp_encoder = true;
> > > 
> > > +	if (intel_display_power_is_enabled(dev_priv, POWER_DOMAIN_AUDIO))
> > > {
> > > +		temp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD);
> > > +		if (temp & AUDIO_OUTPUT_ENABLE(crtc->pipe))
> > > +			pipe_config->has_audio = true;
> > > +	}
> > > +
> > 
> > This code is DDI specific. That shouldn't be a problem since we only support
> > DP
> > MST on DDI platforms, but we shouldn't duplicate that logic here. So I think
> > this should be added to a function that can be called both from here and
> > intel_ddi.c.
> 
> OK, I will try to add a helper function. Which file do you suggest 
> adding the function it?

Add it to intel_ddi.c, where the original occurrence of that code is.

Ander
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx