From: "Verma, Vishal L" <vishal.l.verma@intel.com>
To: "Williams, Dan J" <dan.j.williams@intel.com>,
"linda.knippers@hpe.com" <linda.knippers@hpe.com>
Cc: "linux-nvdimm@lists.01.org" <linux-nvdimm@lists.01.org>,
"toshi.kani@hpe.com" <toshi.kani@hpe.com>,
"jmoyer@redhat.com" <jmoyer@redhat.com>,
"linux-acpi@vger.kernel.org" <linux-acpi@vger.kernel.org>,
"elliott@hpe.com" <elliott@hpe.com>,
"Wysocki, Rafael J" <rafael.j.wysocki@intel.com>
Subject: Re: [PATCH 3/3] nfit: Adjust for different _FIT and NFIT headers
Date: Mon, 23 Nov 2015 23:26:56 +0000 [thread overview]
Message-ID: <1448321216.27481.7.camel@intel.com> (raw)
In-Reply-To: <03fba073944c91810f89e321cb7fa024f8e9e2c1.1448045168.git.linda.knippers@hpe.com>
On Fri, 2015-11-20 at 19:05 -0500, Linda Knippers wrote:
> When support for _FIT was added, the code presumed that the data
> returned by the _FIT method is identical to the NFIT table, which
> starts with an acpi_table_header. However, the _FIT is defined
> to return a data in the format of a series of NFIT type structure
> entries and as a method, has an acpi_object header rather tahn
> an acpi_table_header.
>
> To address the differences, explicitly save the acpi_table_header
> from the NFIT, since it is accessible through /sys, and change
> the nfit pointer in the acpi_desc structure to point to the
> table entries rather than the headers.
>
> Reported-by: Jeff Moyer (jmoyer@redhat.com>
> Signed-off-by: Linda Knippers <linda.knippers@hpe.com>
> ---
> drivers/acpi/nfit.c | 47 +++++++++++++++++++++++++++++++++++---------
> ---
> drivers/acpi/nfit.h | 3 ++-
> 2 files changed, 37 insertions(+), 13 deletions(-)
>
This patch looks good, but the fact that we're doing the header
processing earlier (before acpi_nfit_init) means that the nfit supplied
by the nfit_test framework (tools/testing/nvdimm/test) can no longer
have a header. The following patch fixes this.
Apart from that, and the open question for patch 1, for the series,
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
8<-----
From da2fd5730bc5125c72101a6b55b85fce97663e40 Mon Sep 17 00:00:00 2001
From: Vishal Verma <vishal.l.verma@intel.com>
Date: Mon, 23 Nov 2015 15:41:00 -0700
Subject: [PATCH] nfit_test: Fix nfit generation for test framework
The hotplug fixes move header parsing to happen earlier,
and the way nfit_test calls into the nfit initialization code,
a header is no longer needed. Remove the header from the table
generated by nfit_test entirely.
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
---
tools/testing/nvdimm/test/nfit.c | 46 ++++++++++++----------------------------
1 file changed, 14 insertions(+), 32 deletions(-)
diff --git a/tools/testing/nvdimm/test/nfit.c b/tools/testing/nvdimm/test/nfit.c
index 40ab447..3f92d7f 100644
--- a/tools/testing/nvdimm/test/nfit.c
+++ b/tools/testing/nvdimm/test/nfit.c
@@ -420,8 +420,7 @@ static struct nfit_test_resource *nfit_test_lookup(resource_size_t addr)
static int nfit_test0_alloc(struct nfit_test *t)
{
- size_t nfit_size = sizeof(struct acpi_table_nfit)
- + sizeof(struct acpi_nfit_system_address) * NUM_SPA
+ size_t nfit_size = sizeof(struct acpi_nfit_system_address) * NUM_SPA
+ sizeof(struct acpi_nfit_memory_map) * NUM_MEM
+ sizeof(struct acpi_nfit_control_region) * NUM_DCR
+ sizeof(struct acpi_nfit_data_region) * NUM_BDW
@@ -471,8 +470,7 @@ static int nfit_test0_alloc(struct nfit_test *t)
static int nfit_test1_alloc(struct nfit_test *t)
{
- size_t nfit_size = sizeof(struct acpi_table_nfit)
- + sizeof(struct acpi_nfit_system_address)
+ size_t nfit_size = sizeof(struct acpi_nfit_system_address)
+ sizeof(struct acpi_nfit_memory_map)
+ sizeof(struct acpi_nfit_control_region);
@@ -488,18 +486,6 @@ static int nfit_test1_alloc(struct nfit_test *t)
return 0;
}
-static void nfit_test_init_header(struct acpi_table_nfit *nfit, size_t size)
-{
- memcpy(nfit->header.signature, ACPI_SIG_NFIT, 4);
- nfit->header.length = size;
- nfit->header.revision = 1;
- memcpy(nfit->header.oem_id, "LIBND", 6);
- memcpy(nfit->header.oem_table_id, "TEST", 5);
- nfit->header.oem_revision = 1;
- memcpy(nfit->header.asl_compiler_id, "TST", 4);
- nfit->header.asl_compiler_revision = 1;
-}
-
static void nfit_test0_setup(struct nfit_test *t)
{
struct nvdimm_bus_descriptor *nd_desc;
@@ -513,14 +499,12 @@ static void nfit_test0_setup(struct nfit_test *t)
struct acpi_nfit_flush_address *flush;
unsigned int offset;
- nfit_test_init_header(nfit_buf, size);
-
/*
* spa0 (interleave first half of dimm0 and dimm1, note storage
* does not actually alias the related block-data-window
* regions)
*/
- spa = nfit_buf + sizeof(struct acpi_table_nfit);
+ spa = nfit_buf;
spa->header.type = ACPI_NFIT_TYPE_SYSTEM_ADDRESS;
spa->header.length = sizeof(*spa);
memcpy(spa->range_guid, to_nfit_uuid(NFIT_SPA_PM), 16);
@@ -533,7 +517,7 @@ static void nfit_test0_setup(struct nfit_test *t)
* does not actually alias the related block-data-window
* regions)
*/
- spa = nfit_buf + sizeof(struct acpi_table_nfit) + sizeof(*spa);
+ spa = nfit_buf + sizeof(*spa);
spa->header.type = ACPI_NFIT_TYPE_SYSTEM_ADDRESS;
spa->header.length = sizeof(*spa);
memcpy(spa->range_guid, to_nfit_uuid(NFIT_SPA_PM), 16);
@@ -542,7 +526,7 @@ static void nfit_test0_setup(struct nfit_test *t)
spa->length = SPA1_SIZE;
/* spa2 (dcr0) dimm0 */
- spa = nfit_buf + sizeof(struct acpi_table_nfit) + sizeof(*spa) * 2;
+ spa = nfit_buf + sizeof(*spa) * 2;
spa->header.type = ACPI_NFIT_TYPE_SYSTEM_ADDRESS;
spa->header.length = sizeof(*spa);
memcpy(spa->range_guid, to_nfit_uuid(NFIT_SPA_DCR), 16);
@@ -551,7 +535,7 @@ static void nfit_test0_setup(struct nfit_test *t)
spa->length = DCR_SIZE;
/* spa3 (dcr1) dimm1 */
- spa = nfit_buf + sizeof(struct acpi_table_nfit) + sizeof(*spa) * 3;
+ spa = nfit_buf + sizeof(*spa) * 3;
spa->header.type = ACPI_NFIT_TYPE_SYSTEM_ADDRESS;
spa->header.length = sizeof(*spa);
memcpy(spa->range_guid, to_nfit_uuid(NFIT_SPA_DCR), 16);
@@ -560,7 +544,7 @@ static void nfit_test0_setup(struct nfit_test *t)
spa->length = DCR_SIZE;
/* spa4 (dcr2) dimm2 */
- spa = nfit_buf + sizeof(struct acpi_table_nfit) + sizeof(*spa) * 4;
+ spa = nfit_buf + sizeof(*spa) * 4;
spa->header.type = ACPI_NFIT_TYPE_SYSTEM_ADDRESS;
spa->header.length = sizeof(*spa);
memcpy(spa->range_guid, to_nfit_uuid(NFIT_SPA_DCR), 16);
@@ -569,7 +553,7 @@ static void nfit_test0_setup(struct nfit_test *t)
spa->length = DCR_SIZE;
/* spa5 (dcr3) dimm3 */
- spa = nfit_buf + sizeof(struct acpi_table_nfit) + sizeof(*spa) * 5;
+ spa = nfit_buf + sizeof(*spa) * 5;
spa->header.type = ACPI_NFIT_TYPE_SYSTEM_ADDRESS;
spa->header.length = sizeof(*spa);
memcpy(spa->range_guid, to_nfit_uuid(NFIT_SPA_DCR), 16);
@@ -578,7 +562,7 @@ static void nfit_test0_setup(struct nfit_test *t)
spa->length = DCR_SIZE;
/* spa6 (bdw for dcr0) dimm0 */
- spa = nfit_buf + sizeof(struct acpi_table_nfit) + sizeof(*spa) * 6;
+ spa = nfit_buf + sizeof(*spa) * 6;
spa->header.type = ACPI_NFIT_TYPE_SYSTEM_ADDRESS;
spa->header.length = sizeof(*spa);
memcpy(spa->range_guid, to_nfit_uuid(NFIT_SPA_BDW), 16);
@@ -587,7 +571,7 @@ static void nfit_test0_setup(struct nfit_test *t)
spa->length = DIMM_SIZE;
/* spa7 (bdw for dcr1) dimm1 */
- spa = nfit_buf + sizeof(struct acpi_table_nfit) + sizeof(*spa) * 7;
+ spa = nfit_buf + sizeof(*spa) * 7;
spa->header.type = ACPI_NFIT_TYPE_SYSTEM_ADDRESS;
spa->header.length = sizeof(*spa);
memcpy(spa->range_guid, to_nfit_uuid(NFIT_SPA_BDW), 16);
@@ -596,7 +580,7 @@ static void nfit_test0_setup(struct nfit_test *t)
spa->length = DIMM_SIZE;
/* spa8 (bdw for dcr2) dimm2 */
- spa = nfit_buf + sizeof(struct acpi_table_nfit) + sizeof(*spa) * 8;
+ spa = nfit_buf + sizeof(*spa) * 8;
spa->header.type = ACPI_NFIT_TYPE_SYSTEM_ADDRESS;
spa->header.length = sizeof(*spa);
memcpy(spa->range_guid, to_nfit_uuid(NFIT_SPA_BDW), 16);
@@ -605,7 +589,7 @@ static void nfit_test0_setup(struct nfit_test *t)
spa->length = DIMM_SIZE;
/* spa9 (bdw for dcr3) dimm3 */
- spa = nfit_buf + sizeof(struct acpi_table_nfit) + sizeof(*spa) * 9;
+ spa = nfit_buf + sizeof(*spa) * 9;
spa->header.type = ACPI_NFIT_TYPE_SYSTEM_ADDRESS;
spa->header.length = sizeof(*spa);
memcpy(spa->range_guid, to_nfit_uuid(NFIT_SPA_BDW), 16);
@@ -613,7 +597,7 @@ static void nfit_test0_setup(struct nfit_test *t)
spa->address = t->dimm_dma[3];
spa->length = DIMM_SIZE;
- offset = sizeof(struct acpi_table_nfit) + sizeof(*spa) * 10;
+ offset = sizeof(*spa) * 10;
/* mem-region0 (spa0, dimm0) */
memdev = nfit_buf + offset;
memdev->header.type = ACPI_NFIT_TYPE_MEMORY_MAP;
@@ -1106,9 +1090,7 @@ static void nfit_test1_setup(struct nfit_test *t)
struct acpi_nfit_control_region *dcr;
struct acpi_nfit_system_address *spa;
- nfit_test_init_header(nfit_buf, size);
-
- offset = sizeof(struct acpi_table_nfit);
+ offset = 0;
/* spa0 (flat range with no bdw aliasing) */
spa = nfit_buf + offset;
spa->header.type = ACPI_NFIT_TYPE_SYSTEM_ADDRESS;
--
2.5.0
next prev parent reply other threads:[~2015-11-23 23:27 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-21 0:05 [PATCH 0/3] fix NVDIMM hotplug changes Linda Knippers
2015-11-21 0:05 ` [PATCH 1/3] nfit: Account for table size length variation Linda Knippers
2015-11-23 23:21 ` Verma, Vishal L
2015-11-24 16:24 ` Linda Knippers
2015-11-24 16:31 ` Dan Williams
2015-11-24 17:47 ` Verma, Vishal L
2015-11-21 0:05 ` [PATCH 2/3] nfit: Fix the check for a successful NFIT merge Linda Knippers
2015-11-21 0:05 ` [PATCH 3/3] nfit: Adjust for different _FIT and NFIT headers Linda Knippers
2015-11-23 23:26 ` Verma, Vishal L [this message]
2015-11-24 16:31 ` Linda Knippers
2015-11-24 17:52 ` Verma, Vishal L
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1448321216.27481.7.camel@intel.com \
--to=vishal.l.verma@intel.com \
--cc=dan.j.williams@intel.com \
--cc=elliott@hpe.com \
--cc=jmoyer@redhat.com \
--cc=linda.knippers@hpe.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-nvdimm@lists.01.org \
--cc=rafael.j.wysocki@intel.com \
--cc=toshi.kani@hpe.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.