From: Arvind Kumar <arvindkumar@vmware.com>
To: Johannes Thumshirn <jthumshirn@suse.de>,
Josh Boyer <jwboyer@fedoraproject.org>,
"James.Bottomley@hansenpartnership.com"
<James.Bottomley@hansenpartnership.com>,
Thomas Hellstrom <thellstrom@vmware.com>
Cc: "linux-scsi@vger.kernel.org" <linux-scsi@vger.kernel.org>,
"pv-drivers@vmware.com" <pv-drivers@vmware.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2] VMW_PVSCSI: Fix the issue of DMA-API related warnings.
Date: Fri, 4 Dec 2015 22:07:13 +0000 [thread overview]
Message-ID: <1449266802382.21835@vmware.com> (raw)
In-Reply-To: <1449149747.3311.13.camel@suse.de>
Thanks Josh!
The patch looks good to me.
Thanks!
Arvind
________________________________________
From: Johannes Thumshirn <jthumshirn@suse.de>
Sent: Thursday, December 3, 2015 5:35 AM
To: Josh Boyer; James.Bottomley@hansenpartnership.com; Arvind Kumar; Thomas Hellstrom
Cc: linux-scsi@vger.kernel.org; pv-drivers@vmware.com; linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] VMW_PVSCSI: Fix the issue of DMA-API related warnings.
On Thu, 2015-12-03 at 08:27 -0500, Josh Boyer wrote:
> The driver is missing calls to pci_dma_mapping_error() after
> performing the DMA mapping, which caused DMA-API warning to
> show up in dmesg's output. Though that happens only when
> DMA_API_DEBUG option is enabled. This change fixes the issue
> and makes pvscsi_map_buffers() function more robust.
>
> Signed-off-by: Arvind Kumar <arvindkumar@vmware.com>
> Cc: Josh Boyer <jwboyer@fedoraproject.org>
> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
> Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
> ---
>
> v2: Use -ENOMEM instead of -1 for the error return code as suggested by
> Johannes Thumshirn
>
> drivers/scsi/vmw_pvscsi.c | 45 +++++++++++++++++++++++++++++++++++++++------
> drivers/scsi/vmw_pvscsi.h | 2 +-
> 2 files changed, 40 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/scsi/vmw_pvscsi.c b/drivers/scsi/vmw_pvscsi.c
> index 0f133c1817de..6164634aff18 100644
> --- a/drivers/scsi/vmw_pvscsi.c
> +++ b/drivers/scsi/vmw_pvscsi.c
> @@ -349,9 +349,9 @@ static void pvscsi_create_sg(struct pvscsi_ctx *ctx,
> * Map all data buffers for a command into PCI space and
> * setup the scatter/gather list if needed.
> */
> -static void pvscsi_map_buffers(struct pvscsi_adapter *adapter,
> - struct pvscsi_ctx *ctx, struct scsi_cmnd
> *cmd,
> - struct PVSCSIRingReqDesc *e)
> +static int pvscsi_map_buffers(struct pvscsi_adapter *adapter,
> + struct pvscsi_ctx *ctx, struct scsi_cmnd *cmd,
> + struct PVSCSIRingReqDesc *e)
> {
> unsigned count;
> unsigned bufflen = scsi_bufflen(cmd);
> @@ -360,18 +360,30 @@ static void pvscsi_map_buffers(struct pvscsi_adapter
> *adapter,
> e->dataLen = bufflen;
> e->dataAddr = 0;
> if (bufflen == 0)
> - return;
> + return 0;
>
> sg = scsi_sglist(cmd);
> count = scsi_sg_count(cmd);
> if (count != 0) {
> int segs = scsi_dma_map(cmd);
> - if (segs > 1) {
> +
> + if (segs == -ENOMEM) {
> + scmd_printk(KERN_ERR, cmd,
> + "vmw_pvscsi: Failed to map cmd sglist
> for DMA.\n");
> + return -ENOMEM;
> + } else if (segs > 1) {
> pvscsi_create_sg(ctx, sg, segs);
>
> e->flags |= PVSCSI_FLAG_CMD_WITH_SG_LIST;
> ctx->sglPA = pci_map_single(adapter->dev, ctx->sgl,
> SGL_SIZE,
> PCI_DMA_TODEVICE);
> + if (pci_dma_mapping_error(adapter->dev, ctx->sglPA))
> {
> + scmd_printk(KERN_ERR, cmd,
> + "vmw_pvscsi: Failed to map ctx
> sglist for DMA.\n");
> + scsi_dma_unmap(cmd);
> + ctx->sglPA = 0;
> + return -ENOMEM;
> + }
> e->dataAddr = ctx->sglPA;
> } else
> e->dataAddr = sg_dma_address(sg);
> @@ -382,8 +394,15 @@ static void pvscsi_map_buffers(struct pvscsi_adapter
> *adapter,
> */
> ctx->dataPA = pci_map_single(adapter->dev, sg, bufflen,
> cmd->sc_data_direction);
> + if (pci_dma_mapping_error(adapter->dev, ctx->dataPA)) {
> + scmd_printk(KERN_ERR, cmd,
> + "vmw_pvscsi: Failed to map direct data
> buffer for DMA.\n");
> + return -ENOMEM;
> + }
> e->dataAddr = ctx->dataPA;
> }
> +
> + return 0;
> }
>
> static void pvscsi_unmap_buffers(const struct pvscsi_adapter *adapter,
> @@ -690,6 +709,12 @@ static int pvscsi_queue_ring(struct pvscsi_adapter
> *adapter,
> ctx->sensePA = pci_map_single(adapter->dev, cmd-
> >sense_buffer,
> SCSI_SENSE_BUFFERSIZE,
> PCI_DMA_FROMDEVICE);
> + if (pci_dma_mapping_error(adapter->dev, ctx->sensePA)) {
> + scmd_printk(KERN_ERR, cmd,
> + "vmw_pvscsi: Failed to map sense buffer
> for DMA.\n");
> + ctx->sensePA = 0;
> + return -ENOMEM;
> + }
> e->senseAddr = ctx->sensePA;
> e->senseLen = SCSI_SENSE_BUFFERSIZE;
> } else {
> @@ -711,7 +736,15 @@ static int pvscsi_queue_ring(struct pvscsi_adapter
> *adapter,
> else
> e->flags = 0;
>
> - pvscsi_map_buffers(adapter, ctx, cmd, e);
> + if (pvscsi_map_buffers(adapter, ctx, cmd, e) != 0) {
> + if (cmd->sense_buffer) {
> + pci_unmap_single(adapter->dev, ctx->sensePA,
> + SCSI_SENSE_BUFFERSIZE,
> + PCI_DMA_FROMDEVICE);
> + ctx->sensePA = 0;
> + }
> + return -ENOMEM;
> + }
>
> e->context = pvscsi_map_context(adapter, ctx);
>
> diff --git a/drivers/scsi/vmw_pvscsi.h b/drivers/scsi/vmw_pvscsi.h
> index ee16f0c5c47d..12712c92f37a 100644
> --- a/drivers/scsi/vmw_pvscsi.h
> +++ b/drivers/scsi/vmw_pvscsi.h
> @@ -26,7 +26,7 @@
>
> #include <linux/types.h>
>
> -#define PVSCSI_DRIVER_VERSION_STRING "1.0.5.0-k"
> +#define PVSCSI_DRIVER_VERSION_STRING "1.0.6.0-k"
>
> #define PVSCSI_MAX_NUM_SG_ENTRIES_PER_SEGMENT 128
>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
next prev parent reply other threads:[~2015-12-04 22:07 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-03 13:27 [PATCH v2] VMW_PVSCSI: Fix the issue of DMA-API related warnings Josh Boyer
2015-12-03 13:35 ` Johannes Thumshirn
2015-12-04 22:07 ` Arvind Kumar [this message]
2015-12-10 17:58 ` Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1449266802382.21835@vmware.com \
--to=arvindkumar@vmware.com \
--cc=James.Bottomley@hansenpartnership.com \
--cc=jthumshirn@suse.de \
--cc=jwboyer@fedoraproject.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=pv-drivers@vmware.com \
--cc=thellstrom@vmware.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.