All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: daniel@iogearbox.net, davem@davemloft.net,
	gregkh@linuxfoundation.org, willemb@google.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "packet: only allow extra vlan len on ethernet devices" has been added to the 4.1-stable tree
Date: Fri, 11 Dec 2015 08:48:52 -0800	[thread overview]
Message-ID: <14498525324440@kroah.com> (raw)


This is a note to let you know that I've just added the patch titled

    packet: only allow extra vlan len on ethernet devices

to the 4.1-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     packet-only-allow-extra-vlan-len-on-ethernet-devices.patch
and it can be found in the queue-4.1 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From foo@baz Fri Dec 11 11:39:13 EST 2015
From: Daniel Borkmann <daniel@iogearbox.net>
Date: Wed, 11 Nov 2015 23:25:42 +0100
Subject: packet: only allow extra vlan len on ethernet devices

From: Daniel Borkmann <daniel@iogearbox.net>

[ Upstream commit 3c70c132488794e2489ab045559b0ce0afcf17de ]

Packet sockets can be used by various net devices and are not
really restricted to ARPHRD_ETHER device types. However, when
currently checking for the extra 4 bytes that can be transmitted
in VLAN case, our assumption is that we generally probe on
ARPHRD_ETHER devices. Therefore, before looking into Ethernet
header, check the device type first.

This also fixes the issue where non-ARPHRD_ETHER devices could
have no dev->hard_header_len in TX_RING SOCK_RAW case, and thus
the check would test unfilled linear part of the skb (instead
of non-linear).

Fixes: 57f89bfa2140 ("network: Allow af_packet to transmit +4 bytes for VLAN packets.")
Fixes: 52f1454f629f ("packet: allow to transmit +4 byte in TX_RING slot for VLAN case")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/packet/af_packet.c |   60 ++++++++++++++++++++-----------------------------
 1 file changed, 25 insertions(+), 35 deletions(-)

--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -1524,6 +1524,20 @@ static void fanout_release(struct sock *
 	mutex_unlock(&fanout_mutex);
 }
 
+static bool packet_extra_vlan_len_allowed(const struct net_device *dev,
+					  struct sk_buff *skb)
+{
+	/* Earlier code assumed this would be a VLAN pkt, double-check
+	 * this now that we have the actual packet in hand. We can only
+	 * do this check on Ethernet devices.
+	 */
+	if (unlikely(dev->type != ARPHRD_ETHER))
+		return false;
+
+	skb_reset_mac_header(skb);
+	return likely(eth_hdr(skb)->h_proto == htons(ETH_P_8021Q));
+}
+
 static const struct proto_ops packet_ops;
 
 static const struct proto_ops packet_ops_spkt;
@@ -1685,18 +1699,10 @@ retry:
 		goto retry;
 	}
 
-	if (len > (dev->mtu + dev->hard_header_len + extra_len)) {
-		/* Earlier code assumed this would be a VLAN pkt,
-		 * double-check this now that we have the actual
-		 * packet in hand.
-		 */
-		struct ethhdr *ehdr;
-		skb_reset_mac_header(skb);
-		ehdr = eth_hdr(skb);
-		if (ehdr->h_proto != htons(ETH_P_8021Q)) {
-			err = -EMSGSIZE;
-			goto out_unlock;
-		}
+	if (len > (dev->mtu + dev->hard_header_len + extra_len) &&
+	    !packet_extra_vlan_len_allowed(dev, skb)) {
+		err = -EMSGSIZE;
+		goto out_unlock;
 	}
 
 	skb->protocol = proto;
@@ -2308,18 +2314,10 @@ static int tpacket_snd(struct packet_soc
 		tp_len = tpacket_fill_skb(po, skb, ph, dev, size_max, proto,
 					  addr, hlen);
 		if (likely(tp_len >= 0) &&
-		    tp_len > dev->mtu + dev->hard_header_len) {
-			struct ethhdr *ehdr;
-			/* Earlier code assumed this would be a VLAN pkt,
-			 * double-check this now that we have the actual
-			 * packet in hand.
-			 */
+		    tp_len > dev->mtu + dev->hard_header_len &&
+		    !packet_extra_vlan_len_allowed(dev, skb))
+			tp_len = -EMSGSIZE;
 
-			skb_reset_mac_header(skb);
-			ehdr = eth_hdr(skb);
-			if (ehdr->h_proto != htons(ETH_P_8021Q))
-				tp_len = -EMSGSIZE;
-		}
 		if (unlikely(tp_len < 0)) {
 			if (po->tp_loss) {
 				__packet_set_status(po, ph,
@@ -2540,18 +2538,10 @@ static int packet_snd(struct socket *soc
 
 	sock_tx_timestamp(sk, &skb_shinfo(skb)->tx_flags);
 
-	if (!gso_type && (len > dev->mtu + reserve + extra_len)) {
-		/* Earlier code assumed this would be a VLAN pkt,
-		 * double-check this now that we have the actual
-		 * packet in hand.
-		 */
-		struct ethhdr *ehdr;
-		skb_reset_mac_header(skb);
-		ehdr = eth_hdr(skb);
-		if (ehdr->h_proto != htons(ETH_P_8021Q)) {
-			err = -EMSGSIZE;
-			goto out_free;
-		}
+	if (!gso_type && (len > dev->mtu + reserve + extra_len) &&
+	    !packet_extra_vlan_len_allowed(dev, skb)) {
+		err = -EMSGSIZE;
+		goto out_free;
 	}
 
 	skb->protocol = proto;


Patches currently in stable-queue which might be from daniel@iogearbox.net are

queue-4.1/packet-infer-protocol-from-ethernet-header-if-unset.patch
queue-4.1/bpf-array-fix-heap-out-of-bounds-access-when-updating-elements.patch
queue-4.1/ipv6-sctp-implement-sctp_v6_destroy_sock.patch
queue-4.1/packet-only-allow-extra-vlan-len-on-ethernet-devices.patch
queue-4.1/net-scm-fix-pax-detected-msg_controllen-overflow-in-scm_detach_fds.patch
queue-4.1/packet-fix-tpacket_snd-max-frame-len.patch
queue-4.1/packet-always-probe-for-transport-header.patch
queue-4.1/packet-do-skb_probe_transport_header-when-we-actually-have-data.patch
queue-4.1/tools-net-use-include-uapi-with-__exported_headers__.patch

                 reply	other threads:[~2015-12-11 20:21 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=14498525324440@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=daniel@iogearbox.net \
    --cc=davem@davemloft.net \
    --cc=stable-commits@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=willemb@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.