From: "K. Y. Srinivasan" <kys@microsoft.com>
To: gregkh@linuxfoundation.org, linux-kernel@vger.kernel.org,
devel@linuxdriverproject.org, ohering@suse.com,
jbottomley@parallels.com, hch@infradead.org,
linux-scsi@vger.kernel.org, apw@canonical.com,
vkuznets@redhat.com, jasowang@redhat.com,
martin.petersen@oracle.com
Subject: [PATCH V3 2/4] scsi: storvsc: Properly support Fibre Channel devices
Date: Sun, 13 Dec 2015 12:28:30 -0800 [thread overview]
Message-ID: <1450038512-19252-2-git-send-email-kys@microsoft.com> (raw)
In-Reply-To: <1450038512-19252-1-git-send-email-kys@microsoft.com>
For FC devices managed by this driver, atttach the appropriate transport
template. This will allow us to create the appropriate sysfs files for
these devices. With this we can publish the wwn for both the port and the node.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Tested-by: Alex Ng <alexng@microsoft.com>
---
V2: Fixed error paths - Dan Carpenter <dan.carpenter@oracle.com>
V3: Fixed build issues reported by kbuild test robot <lkp@intel.com>
drivers/scsi/storvsc_drv.c | 181 ++++++++++++++++++++++++++++++++-----------
1 files changed, 134 insertions(+), 47 deletions(-)
diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 00bb4bd..220b794 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -41,6 +41,7 @@
#include <scsi/scsi_eh.h>
#include <scsi/scsi_devinfo.h>
#include <scsi/scsi_dbg.h>
+#include <scsi/scsi_transport_fc.h>
/*
* All wire protocol details (storage protocol between the guest and the host)
@@ -397,6 +398,9 @@ static int storvsc_timeout = 180;
static int msft_blist_flags = BLIST_TRY_VPD_PAGES;
+#ifdef CONFIG_SCSI_FC_ATTRS
+static struct scsi_transport_template *fc_transport_template;
+#endif
static void storvsc_on_channel_callback(void *context);
@@ -456,6 +460,11 @@ struct storvsc_device {
/* Used for vsc/vsp channel reset process */
struct storvsc_cmd_request init_request;
struct storvsc_cmd_request reset_request;
+ /*
+ * Currently active port and node names for FC devices.
+ */
+ u64 node_name;
+ u64 port_name;
};
struct hv_host_device {
@@ -695,7 +704,26 @@ static void handle_multichannel_storage(struct hv_device *device, int max_chns)
vmbus_are_subchannels_present(device->channel);
}
-static int storvsc_channel_init(struct hv_device *device)
+static void cache_wwn(struct storvsc_device *stor_device,
+ struct vstor_packet *vstor_packet)
+{
+ /*
+ * Cache the currently active port and node ww names.
+ */
+ if (vstor_packet->wwn_packet.primary_active) {
+ stor_device->node_name =
+ wwn_to_u64(vstor_packet->wwn_packet.primary_node_wwn);
+ stor_device->port_name =
+ wwn_to_u64(vstor_packet->wwn_packet.primary_port_wwn);
+ } else {
+ stor_device->node_name =
+ wwn_to_u64(vstor_packet->wwn_packet.secondary_node_wwn);
+ stor_device->port_name =
+ wwn_to_u64(vstor_packet->wwn_packet.secondary_port_wwn);
+ }
+}
+
+static int storvsc_channel_init(struct hv_device *device, bool is_fc)
{
struct storvsc_device *stor_device;
struct storvsc_cmd_request *request;
@@ -727,19 +755,15 @@ static int storvsc_channel_init(struct hv_device *device)
VM_PKT_DATA_INBAND,
VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
if (ret != 0)
- goto cleanup;
+ return ret;
t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
- if (t == 0) {
- ret = -ETIMEDOUT;
- goto cleanup;
- }
+ if (t == 0)
+ return -ETIMEDOUT;
if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
- vstor_packet->status != 0) {
- ret = -EINVAL;
- goto cleanup;
- }
+ vstor_packet->status != 0)
+ return -EINVAL;
for (i = 0; i < ARRAY_SIZE(vmstor_protocols); i++) {
@@ -764,18 +788,14 @@ static int storvsc_channel_init(struct hv_device *device)
VM_PKT_DATA_INBAND,
VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
if (ret != 0)
- goto cleanup;
+ return ret;
t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
- if (t == 0) {
- ret = -ETIMEDOUT;
- goto cleanup;
- }
+ if (t == 0)
+ return -ETIMEDOUT;
- if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO) {
- ret = -EINVAL;
- goto cleanup;
- }
+ if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO)
+ return -EINVAL;
if (vstor_packet->status == 0) {
vmstor_proto_version =
@@ -791,10 +811,8 @@ static int storvsc_channel_init(struct hv_device *device)
}
}
- if (vstor_packet->status != 0) {
- ret = -EINVAL;
- goto cleanup;
- }
+ if (vstor_packet->status != 0)
+ return -EINVAL;
memset(vstor_packet, 0, sizeof(struct vstor_packet));
@@ -809,19 +827,15 @@ static int storvsc_channel_init(struct hv_device *device)
VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
if (ret != 0)
- goto cleanup;
+ return ret;
t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
- if (t == 0) {
- ret = -ETIMEDOUT;
- goto cleanup;
- }
+ if (t == 0)
+ return -ETIMEDOUT;
if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
- vstor_packet->status != 0) {
- ret = -EINVAL;
- goto cleanup;
- }
+ vstor_packet->status != 0)
+ return -EINVAL;
/*
* Check to see if multi-channel support is there.
@@ -837,6 +851,38 @@ static int storvsc_channel_init(struct hv_device *device)
stor_device->max_transfer_bytes =
vstor_packet->storage_channel_properties.max_transfer_bytes;
+ if (!is_fc)
+ goto done;
+
+ memset(vstor_packet, 0, sizeof(struct vstor_packet));
+ vstor_packet->operation = VSTOR_OPERATION_FCHBA_DATA;
+ vstor_packet->flags = REQUEST_COMPLETION_FLAG;
+
+ ret = vmbus_sendpacket(device->channel, vstor_packet,
+ (sizeof(struct vstor_packet) -
+ vmscsi_size_delta),
+ (unsigned long)request,
+ VM_PKT_DATA_INBAND,
+ VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
+
+ if (ret != 0)
+ return ret;
+
+ t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
+ if (t == 0)
+ return -ETIMEDOUT;
+
+ if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
+ vstor_packet->status != 0)
+ return -EINVAL;
+
+ /*
+ * Cache the currently active port and node ww names.
+ */
+ cache_wwn(stor_device, vstor_packet);
+
+done:
+
memset(vstor_packet, 0, sizeof(struct vstor_packet));
vstor_packet->operation = VSTOR_OPERATION_END_INITIALIZATION;
vstor_packet->flags = REQUEST_COMPLETION_FLAG;
@@ -849,25 +895,19 @@ static int storvsc_channel_init(struct hv_device *device)
VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
if (ret != 0)
- goto cleanup;
+ return ret;
t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
- if (t == 0) {
- ret = -ETIMEDOUT;
- goto cleanup;
- }
+ if (t == 0)
+ return -ETIMEDOUT;
if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
- vstor_packet->status != 0) {
- ret = -EINVAL;
- goto cleanup;
- }
+ vstor_packet->status != 0)
+ return -EINVAL;
if (process_sub_channels)
handle_multichannel_storage(device, max_chns);
-
-cleanup:
return ret;
}
@@ -1076,6 +1116,14 @@ static void storvsc_on_receive(struct hv_device *device,
schedule_work(&work->work);
break;
+ case VSTOR_OPERATION_FCHBA_DATA:
+ stor_device = get_in_stor_device(device);
+ cache_wwn(stor_device, vstor_packet);
+#ifdef CONFIG_SCSI_FC_ATTRS
+ fc_host_node_name(stor_device->host) = stor_device->node_name;
+ fc_host_port_name(stor_device->host) = stor_device->port_name;
+#endif
+ break;
default:
break;
}
@@ -1131,7 +1179,8 @@ static void storvsc_on_channel_callback(void *context)
return;
}
-static int storvsc_connect_to_vsp(struct hv_device *device, u32 ring_size)
+static int storvsc_connect_to_vsp(struct hv_device *device, u32 ring_size,
+ bool is_fc)
{
struct vmstorage_channel_properties props;
int ret;
@@ -1148,7 +1197,7 @@ static int storvsc_connect_to_vsp(struct hv_device *device, u32 ring_size)
if (ret != 0)
return ret;
- ret = storvsc_channel_init(device);
+ ret = storvsc_channel_init(device, is_fc);
return ret;
}
@@ -1573,6 +1622,7 @@ static int storvsc_probe(struct hv_device *device,
struct Scsi_Host *host;
struct hv_host_device *host_dev;
bool dev_is_ide = ((dev_id->driver_data == IDE_GUID) ? true : false);
+ bool is_fc = ((dev_id->driver_data == SFC_GUID) ? true : false);
int target = 0;
struct storvsc_device *stor_device;
int max_luns_per_target;
@@ -1630,7 +1680,7 @@ static int storvsc_probe(struct hv_device *device,
hv_set_drvdata(device, stor_device);
stor_device->port_number = host->host_no;
- ret = storvsc_connect_to_vsp(device, storvsc_ringbuffer_size);
+ ret = storvsc_connect_to_vsp(device, storvsc_ringbuffer_size, is_fc);
if (ret)
goto err_out1;
@@ -1642,6 +1692,9 @@ static int storvsc_probe(struct hv_device *device,
host->max_lun = STORVSC_FC_MAX_LUNS_PER_TARGET;
host->max_id = STORVSC_FC_MAX_TARGETS;
host->max_channel = STORVSC_FC_MAX_CHANNELS - 1;
+#ifdef CONFIG_SCSI_FC_ATTRS
+ host->transportt = fc_transport_template;
+#endif
break;
case SCSI_GUID:
@@ -1681,6 +1734,12 @@ static int storvsc_probe(struct hv_device *device,
goto err_out2;
}
}
+#ifdef CONFIG_SCSI_FC_ATTRS
+ if (host->transportt == fc_transport_template) {
+ fc_host_node_name(host) = stor_device->node_name;
+ fc_host_port_name(host) = stor_device->port_name;
+ }
+#endif
return 0;
err_out2:
@@ -1706,6 +1765,10 @@ static int storvsc_remove(struct hv_device *dev)
struct storvsc_device *stor_device = hv_get_drvdata(dev);
struct Scsi_Host *host = stor_device->host;
+#ifdef CONFIG_SCSI_FC_ATTRS
+ if (host->transportt == fc_transport_template)
+ fc_remove_host(host);
+#endif
scsi_remove_host(host);
storvsc_dev_remove(dev);
scsi_host_put(host);
@@ -1720,8 +1783,16 @@ static struct hv_driver storvsc_drv = {
.remove = storvsc_remove,
};
+#ifdef CONFIG_SCSI_FC_ATTRS
+static struct fc_function_template fc_transport_functions = {
+ .show_host_node_name = 1,
+ .show_host_port_name = 1,
+};
+#endif
+
static int __init storvsc_drv_init(void)
{
+ int ret;
/*
* Divide the ring buffer data size (which is 1 page less
@@ -1736,12 +1807,28 @@ static int __init storvsc_drv_init(void)
vmscsi_size_delta,
sizeof(u64)));
- return vmbus_driver_register(&storvsc_drv);
+#ifdef CONFIG_SCSI_FC_ATTRS
+ fc_transport_template = fc_attach_transport(&fc_transport_functions);
+ if (!fc_transport_template)
+ return -ENODEV;
+#endif
+
+ ret = vmbus_driver_register(&storvsc_drv);
+
+#ifdef CONFIG_SCSI_FC_ATTRS
+ if (ret)
+ fc_release_transport(fc_transport_template);
+#endif
+
+ return ret;
}
static void __exit storvsc_drv_exit(void)
{
vmbus_driver_unregister(&storvsc_drv);
+#ifdef CONFIG_SCSI_FC_ATTRS
+ fc_release_transport(fc_transport_template);
+#endif
}
MODULE_LICENSE("GPL");
--
1.7.4.1
WARNING: multiple messages have this Message-ID (diff)
From: "K. Y. Srinivasan" <kys@microsoft.com>
To: gregkh@linuxfoundation.org, linux-kernel@vger.kernel.org,
devel@linuxdriverproject.org, ohering@suse.com,
jbottomley@parallels.com, hch@infradead.org,
linux-scsi@vger.kernel.org, apw@canonical.com,
vkuznets@redhat.com, jasowang@redhat.com,
martin.petersen@oracle.com
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Subject: [PATCH V3 2/4] scsi: storvsc: Properly support Fibre Channel devices
Date: Sun, 13 Dec 2015 12:28:30 -0800 [thread overview]
Message-ID: <1450038512-19252-2-git-send-email-kys@microsoft.com> (raw)
In-Reply-To: <1450038512-19252-1-git-send-email-kys@microsoft.com>
For FC devices managed by this driver, atttach the appropriate transport
template. This will allow us to create the appropriate sysfs files for
these devices. With this we can publish the wwn for both the port and the node.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Tested-by: Alex Ng <alexng@microsoft.com>
---
V2: Fixed error paths - Dan Carpenter <dan.carpenter@oracle.com>
V3: Fixed build issues reported by kbuild test robot <lkp@intel.com>
drivers/scsi/storvsc_drv.c | 181 ++++++++++++++++++++++++++++++++-----------
1 files changed, 134 insertions(+), 47 deletions(-)
diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 00bb4bd..220b794 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -41,6 +41,7 @@
#include <scsi/scsi_eh.h>
#include <scsi/scsi_devinfo.h>
#include <scsi/scsi_dbg.h>
+#include <scsi/scsi_transport_fc.h>
/*
* All wire protocol details (storage protocol between the guest and the host)
@@ -397,6 +398,9 @@ static int storvsc_timeout = 180;
static int msft_blist_flags = BLIST_TRY_VPD_PAGES;
+#ifdef CONFIG_SCSI_FC_ATTRS
+static struct scsi_transport_template *fc_transport_template;
+#endif
static void storvsc_on_channel_callback(void *context);
@@ -456,6 +460,11 @@ struct storvsc_device {
/* Used for vsc/vsp channel reset process */
struct storvsc_cmd_request init_request;
struct storvsc_cmd_request reset_request;
+ /*
+ * Currently active port and node names for FC devices.
+ */
+ u64 node_name;
+ u64 port_name;
};
struct hv_host_device {
@@ -695,7 +704,26 @@ static void handle_multichannel_storage(struct hv_device *device, int max_chns)
vmbus_are_subchannels_present(device->channel);
}
-static int storvsc_channel_init(struct hv_device *device)
+static void cache_wwn(struct storvsc_device *stor_device,
+ struct vstor_packet *vstor_packet)
+{
+ /*
+ * Cache the currently active port and node ww names.
+ */
+ if (vstor_packet->wwn_packet.primary_active) {
+ stor_device->node_name =
+ wwn_to_u64(vstor_packet->wwn_packet.primary_node_wwn);
+ stor_device->port_name =
+ wwn_to_u64(vstor_packet->wwn_packet.primary_port_wwn);
+ } else {
+ stor_device->node_name =
+ wwn_to_u64(vstor_packet->wwn_packet.secondary_node_wwn);
+ stor_device->port_name =
+ wwn_to_u64(vstor_packet->wwn_packet.secondary_port_wwn);
+ }
+}
+
+static int storvsc_channel_init(struct hv_device *device, bool is_fc)
{
struct storvsc_device *stor_device;
struct storvsc_cmd_request *request;
@@ -727,19 +755,15 @@ static int storvsc_channel_init(struct hv_device *device)
VM_PKT_DATA_INBAND,
VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
if (ret != 0)
- goto cleanup;
+ return ret;
t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
- if (t == 0) {
- ret = -ETIMEDOUT;
- goto cleanup;
- }
+ if (t == 0)
+ return -ETIMEDOUT;
if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
- vstor_packet->status != 0) {
- ret = -EINVAL;
- goto cleanup;
- }
+ vstor_packet->status != 0)
+ return -EINVAL;
for (i = 0; i < ARRAY_SIZE(vmstor_protocols); i++) {
@@ -764,18 +788,14 @@ static int storvsc_channel_init(struct hv_device *device)
VM_PKT_DATA_INBAND,
VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
if (ret != 0)
- goto cleanup;
+ return ret;
t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
- if (t == 0) {
- ret = -ETIMEDOUT;
- goto cleanup;
- }
+ if (t == 0)
+ return -ETIMEDOUT;
- if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO) {
- ret = -EINVAL;
- goto cleanup;
- }
+ if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO)
+ return -EINVAL;
if (vstor_packet->status == 0) {
vmstor_proto_version =
@@ -791,10 +811,8 @@ static int storvsc_channel_init(struct hv_device *device)
}
}
- if (vstor_packet->status != 0) {
- ret = -EINVAL;
- goto cleanup;
- }
+ if (vstor_packet->status != 0)
+ return -EINVAL;
memset(vstor_packet, 0, sizeof(struct vstor_packet));
@@ -809,19 +827,15 @@ static int storvsc_channel_init(struct hv_device *device)
VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
if (ret != 0)
- goto cleanup;
+ return ret;
t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
- if (t == 0) {
- ret = -ETIMEDOUT;
- goto cleanup;
- }
+ if (t == 0)
+ return -ETIMEDOUT;
if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
- vstor_packet->status != 0) {
- ret = -EINVAL;
- goto cleanup;
- }
+ vstor_packet->status != 0)
+ return -EINVAL;
/*
* Check to see if multi-channel support is there.
@@ -837,6 +851,38 @@ static int storvsc_channel_init(struct hv_device *device)
stor_device->max_transfer_bytes =
vstor_packet->storage_channel_properties.max_transfer_bytes;
+ if (!is_fc)
+ goto done;
+
+ memset(vstor_packet, 0, sizeof(struct vstor_packet));
+ vstor_packet->operation = VSTOR_OPERATION_FCHBA_DATA;
+ vstor_packet->flags = REQUEST_COMPLETION_FLAG;
+
+ ret = vmbus_sendpacket(device->channel, vstor_packet,
+ (sizeof(struct vstor_packet) -
+ vmscsi_size_delta),
+ (unsigned long)request,
+ VM_PKT_DATA_INBAND,
+ VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
+
+ if (ret != 0)
+ return ret;
+
+ t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
+ if (t == 0)
+ return -ETIMEDOUT;
+
+ if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
+ vstor_packet->status != 0)
+ return -EINVAL;
+
+ /*
+ * Cache the currently active port and node ww names.
+ */
+ cache_wwn(stor_device, vstor_packet);
+
+done:
+
memset(vstor_packet, 0, sizeof(struct vstor_packet));
vstor_packet->operation = VSTOR_OPERATION_END_INITIALIZATION;
vstor_packet->flags = REQUEST_COMPLETION_FLAG;
@@ -849,25 +895,19 @@ static int storvsc_channel_init(struct hv_device *device)
VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
if (ret != 0)
- goto cleanup;
+ return ret;
t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
- if (t == 0) {
- ret = -ETIMEDOUT;
- goto cleanup;
- }
+ if (t == 0)
+ return -ETIMEDOUT;
if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
- vstor_packet->status != 0) {
- ret = -EINVAL;
- goto cleanup;
- }
+ vstor_packet->status != 0)
+ return -EINVAL;
if (process_sub_channels)
handle_multichannel_storage(device, max_chns);
-
-cleanup:
return ret;
}
@@ -1076,6 +1116,14 @@ static void storvsc_on_receive(struct hv_device *device,
schedule_work(&work->work);
break;
+ case VSTOR_OPERATION_FCHBA_DATA:
+ stor_device = get_in_stor_device(device);
+ cache_wwn(stor_device, vstor_packet);
+#ifdef CONFIG_SCSI_FC_ATTRS
+ fc_host_node_name(stor_device->host) = stor_device->node_name;
+ fc_host_port_name(stor_device->host) = stor_device->port_name;
+#endif
+ break;
default:
break;
}
@@ -1131,7 +1179,8 @@ static void storvsc_on_channel_callback(void *context)
return;
}
-static int storvsc_connect_to_vsp(struct hv_device *device, u32 ring_size)
+static int storvsc_connect_to_vsp(struct hv_device *device, u32 ring_size,
+ bool is_fc)
{
struct vmstorage_channel_properties props;
int ret;
@@ -1148,7 +1197,7 @@ static int storvsc_connect_to_vsp(struct hv_device *device, u32 ring_size)
if (ret != 0)
return ret;
- ret = storvsc_channel_init(device);
+ ret = storvsc_channel_init(device, is_fc);
return ret;
}
@@ -1573,6 +1622,7 @@ static int storvsc_probe(struct hv_device *device,
struct Scsi_Host *host;
struct hv_host_device *host_dev;
bool dev_is_ide = ((dev_id->driver_data == IDE_GUID) ? true : false);
+ bool is_fc = ((dev_id->driver_data == SFC_GUID) ? true : false);
int target = 0;
struct storvsc_device *stor_device;
int max_luns_per_target;
@@ -1630,7 +1680,7 @@ static int storvsc_probe(struct hv_device *device,
hv_set_drvdata(device, stor_device);
stor_device->port_number = host->host_no;
- ret = storvsc_connect_to_vsp(device, storvsc_ringbuffer_size);
+ ret = storvsc_connect_to_vsp(device, storvsc_ringbuffer_size, is_fc);
if (ret)
goto err_out1;
@@ -1642,6 +1692,9 @@ static int storvsc_probe(struct hv_device *device,
host->max_lun = STORVSC_FC_MAX_LUNS_PER_TARGET;
host->max_id = STORVSC_FC_MAX_TARGETS;
host->max_channel = STORVSC_FC_MAX_CHANNELS - 1;
+#ifdef CONFIG_SCSI_FC_ATTRS
+ host->transportt = fc_transport_template;
+#endif
break;
case SCSI_GUID:
@@ -1681,6 +1734,12 @@ static int storvsc_probe(struct hv_device *device,
goto err_out2;
}
}
+#ifdef CONFIG_SCSI_FC_ATTRS
+ if (host->transportt == fc_transport_template) {
+ fc_host_node_name(host) = stor_device->node_name;
+ fc_host_port_name(host) = stor_device->port_name;
+ }
+#endif
return 0;
err_out2:
@@ -1706,6 +1765,10 @@ static int storvsc_remove(struct hv_device *dev)
struct storvsc_device *stor_device = hv_get_drvdata(dev);
struct Scsi_Host *host = stor_device->host;
+#ifdef CONFIG_SCSI_FC_ATTRS
+ if (host->transportt == fc_transport_template)
+ fc_remove_host(host);
+#endif
scsi_remove_host(host);
storvsc_dev_remove(dev);
scsi_host_put(host);
@@ -1720,8 +1783,16 @@ static struct hv_driver storvsc_drv = {
.remove = storvsc_remove,
};
+#ifdef CONFIG_SCSI_FC_ATTRS
+static struct fc_function_template fc_transport_functions = {
+ .show_host_node_name = 1,
+ .show_host_port_name = 1,
+};
+#endif
+
static int __init storvsc_drv_init(void)
{
+ int ret;
/*
* Divide the ring buffer data size (which is 1 page less
@@ -1736,12 +1807,28 @@ static int __init storvsc_drv_init(void)
vmscsi_size_delta,
sizeof(u64)));
- return vmbus_driver_register(&storvsc_drv);
+#ifdef CONFIG_SCSI_FC_ATTRS
+ fc_transport_template = fc_attach_transport(&fc_transport_functions);
+ if (!fc_transport_template)
+ return -ENODEV;
+#endif
+
+ ret = vmbus_driver_register(&storvsc_drv);
+
+#ifdef CONFIG_SCSI_FC_ATTRS
+ if (ret)
+ fc_release_transport(fc_transport_template);
+#endif
+
+ return ret;
}
static void __exit storvsc_drv_exit(void)
{
vmbus_driver_unregister(&storvsc_drv);
+#ifdef CONFIG_SCSI_FC_ATTRS
+ fc_release_transport(fc_transport_template);
+#endif
}
MODULE_LICENSE("GPL");
--
1.7.4.1
next prev parent reply other threads:[~2015-12-13 20:28 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-13 20:28 [PATCH V3 0/4] scsi: storvsc: Properly support FC hosts K. Y. Srinivasan
2015-12-13 20:28 ` [PATCH V3 1/4] scsi: storvsc: Fix a bug in the layout of the hv_fc_wwn_packet K. Y. Srinivasan
2015-12-13 20:28 ` K. Y. Srinivasan
2015-12-13 20:28 ` K. Y. Srinivasan [this message]
2015-12-13 20:28 ` [PATCH V3 2/4] scsi: storvsc: Properly support Fibre Channel devices K. Y. Srinivasan
2015-12-18 8:49 ` Hannes Reinecke
2015-12-18 17:13 ` KY Srinivasan
2015-12-18 17:13 ` James Bottomley
2015-12-21 16:02 ` KY Srinivasan
2015-12-21 16:02 ` KY Srinivasan
2015-12-13 20:28 ` [PATCH V3 3/4] scsi: storvsc: Refactor the code in storvsc_channel_init() K. Y. Srinivasan
2015-12-13 20:28 ` K. Y. Srinivasan
2015-12-18 8:50 ` Hannes Reinecke
2015-12-18 8:50 ` Hannes Reinecke
2015-12-13 20:28 ` [PATCH V3 4/4] scsi: storvsc: Tighten up the interrupt path K. Y. Srinivasan
2015-12-13 20:28 ` K. Y. Srinivasan
2015-12-18 8:51 ` Hannes Reinecke
2015-12-18 16:20 ` KY Srinivasan
2015-12-18 16:48 ` James Bottomley
2015-12-19 2:28 ` KY Srinivasan
2015-12-19 2:28 ` KY Srinivasan
2015-12-21 7:42 ` Hannes Reinecke
2015-12-21 7:42 ` Hannes Reinecke
2015-12-21 16:28 ` James Bottomley
2015-12-21 19:40 ` KY Srinivasan
2015-12-21 19:40 ` KY Srinivasan
2015-12-18 8:40 ` [PATCH V3 1/4] scsi: storvsc: Fix a bug in the layout of the hv_fc_wwn_packet Hannes Reinecke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1450038512-19252-2-git-send-email-kys@microsoft.com \
--to=kys@microsoft.com \
--cc=apw@canonical.com \
--cc=devel@linuxdriverproject.org \
--cc=gregkh@linuxfoundation.org \
--cc=hch@infradead.org \
--cc=jasowang@redhat.com \
--cc=jbottomley@parallels.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=ohering@suse.com \
--cc=vkuznets@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.