From: Arend van Spriel <arend@broadcom.com>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless <linux-wireless@vger.kernel.org>,
Arend van Spriel <arend@broadcom.com>
Subject: [PATCH 4/7] brcmfmac: obtain feature info using 'cap' firmware command
Date: Mon, 14 Dec 2015 14:39:51 +0100 [thread overview]
Message-ID: <1450100394-17414-5-git-send-email-arend@broadcom.com> (raw)
In-Reply-To: <1450100394-17414-1-git-send-email-arend@broadcom.com>
Several features in the driver directly map to a firmware feature
listed in response of the 'cap' firmware command. For those features
this response will be examined instead of attempting individual
firmware commands.
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
---
.../wireless/broadcom/brcm80211/brcmfmac/feature.c | 51 +++++++++++++---------
1 file changed, 30 insertions(+), 21 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
index d9d1ca4..08b7200 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
@@ -40,6 +40,17 @@ static const char *brcmf_feat_names[] = {
};
#undef BRCMF_FEAT_DEF
+struct brcmf_feat_fwcap {
+ enum brcmf_feat_id feature;
+ const char * const fwcap_id;
+};
+
+static const struct brcmf_feat_fwcap brcmf_fwcap_map[] = {
+ { BRCMF_FEAT_MBSS, "mbss" },
+ { BRCMF_FEAT_MCHAN, "mchan" },
+ { BRCMF_FEAT_P2P, "p2p" },
+};
+
#ifdef DEBUG
/*
* expand quirk list to array of quirk strings.
@@ -104,25 +115,22 @@ static void brcmf_feat_iovar_int_get(struct brcmf_if *ifp,
}
}
-/**
- * brcmf_feat_iovar_int_set() - determine feature through iovar set.
- *
- * @ifp: interface to query.
- * @id: feature id.
- * @name: iovar name.
- */
-static void brcmf_feat_iovar_int_set(struct brcmf_if *ifp,
- enum brcmf_feat_id id, char *name, u32 val)
+static void brcmf_feat_firmware_capabilities(struct brcmf_if *ifp)
{
- int err;
-
- err = brcmf_fil_iovar_int_set(ifp, name, val);
- if (err == 0) {
- brcmf_dbg(INFO, "enabling feature: %s\n", brcmf_feat_names[id]);
- ifp->drvr->feat_flags |= BIT(id);
- } else {
- brcmf_dbg(TRACE, "%s feature check failed: %d\n",
- brcmf_feat_names[id], err);
+ char caps[256];
+ enum brcmf_feat_id id;
+ int i;
+
+ brcmf_fil_iovar_data_get(ifp, "cap", caps, sizeof(caps));
+ brcmf_dbg(INFO, "[ %s]\n", caps);
+
+ for (i = 0; i < ARRAY_SIZE(brcmf_fwcap_map); i++) {
+ if (strnstr(caps, brcmf_fwcap_map[i].fwcap_id, sizeof(caps))) {
+ id = brcmf_fwcap_map[i].feature;
+ brcmf_dbg(INFO, "enabling feature: %s\n",
+ brcmf_feat_names[id]);
+ ifp->drvr->feat_flags |= BIT(id);
+ }
}
}
@@ -130,13 +138,14 @@ void brcmf_feat_attach(struct brcmf_pub *drvr)
{
struct brcmf_if *ifp = brcmf_get_ifp(drvr, 0);
- brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_MCHAN, "mchan");
+ brcmf_feat_firmware_capabilities(ifp);
+
brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_PNO, "pfn");
if (drvr->bus_if->wowl_supported)
brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_WOWL, "wowl");
+ /* MBSS does not work for 43362 */
if (drvr->bus_if->chip != BRCM_CC_43362_CHIP_ID)
- brcmf_feat_iovar_int_set(ifp, BRCMF_FEAT_MBSS, "mbss", 0);
- brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_P2P, "p2p");
+ ifp->drvr->feat_flags &= BIT(BRCMF_FEAT_MBSS);
brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_RSDB, "rsdb_mode");
brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_TDLS, "tdls_enable");
--
1.9.1
next prev parent reply other threads:[~2015-12-14 13:39 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-14 13:39 [PATCH 0/7] brcmfmac: IBSS fixes and random mac scheduled scan Arend van Spriel
2015-12-14 13:39 ` [PATCH 1/7] brcmfmac: add arp offload ip address table configuration support Arend van Spriel
2015-12-14 13:39 ` [PATCH 2/7] brcmfmac: Add get_station support for IBSS Arend van Spriel
2015-12-14 13:39 ` [PATCH 3/7] brcmfmac: Add support for scheduled scan mac randomization Arend van Spriel
2015-12-29 20:47 ` Mathy Vanhoef
2015-12-31 21:50 ` Arend van Spriel
2016-01-01 10:39 ` Kalle Valo
2016-01-02 8:28 ` Arend van Spriel
2015-12-14 13:39 ` Arend van Spriel [this message]
2015-12-29 20:58 ` [PATCH 4/7] brcmfmac: obtain feature info using 'cap' firmware command Mathy Vanhoef
2015-12-31 21:55 ` Arend van Spriel
2016-01-01 7:05 ` Arend van Spriel
2016-01-02 20:21 ` Mathy Vanhoef
2015-12-14 13:39 ` [PATCH 5/7] brcmfmac: Fix warn trace on module unload while in ibss mode Arend van Spriel
2015-12-14 13:39 ` [PATCH 6/7] brcmfmac: Move all module parameters to one place Arend van Spriel
2015-12-14 13:39 ` [PATCH 7/7] brcmfmac: introduce module parameter to force successful probe Arend van Spriel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1450100394-17414-5-git-send-email-arend@broadcom.com \
--to=arend@broadcom.com \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.