From: Arnaldo Carvalho de Melo <acme@kernel.org>
To: Ingo Molnar <mingo@kernel.org>
Cc: linux-kernel@vger.kernel.org,
Josh Poimboeuf <jpoimboe@redhat.com>,
Namhyung Kim <namhyung@kernel.org>,
Peter Zijlstra <peterz@infradead.org>,
Arnaldo Carvalho de Melo <acme@redhat.com>
Subject: [PATCH 02/10] tools build: Fix feature Makefile issues with 'O='
Date: Wed, 16 Dec 2015 21:47:55 -0300 [thread overview]
Message-ID: <1450313283-25348-3-git-send-email-acme@kernel.org> (raw)
In-Reply-To: <1450313283-25348-1-git-send-email-acme@kernel.org>
From: Josh Poimboeuf <jpoimboe@redhat.com>
When building perf binaries outside the source tree with 'make O=<dir>',
the auto-detected features get re-tested for every build, which is
unnecessary and inconsistent with the behavior seen when building
directly in the source tree.
Another issue is that 'make O=<dir> clean' doesn't remove the feature
files from the object tree.
Fix these problems by looking for the binaries in the $(OUTPUT)
directory.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/113bd01530e9761778c60a75a96c65fc59860f68.1450193761.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/build/Makefile.feature | 2 +-
tools/build/feature/Makefile | 93 ++++++++++++++++++++++----------------------
2 files changed, 48 insertions(+), 47 deletions(-)
diff --git a/tools/build/Makefile.feature b/tools/build/Makefile.feature
index b8c31ece2d96..6c0519de765d 100644
--- a/tools/build/Makefile.feature
+++ b/tools/build/Makefile.feature
@@ -7,7 +7,7 @@ endif
feature_check = $(eval $(feature_check_code))
define feature_check_code
- feature-$(1) := $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CFLAGS="$(EXTRA_CFLAGS) $(FEATURE_CHECK_CFLAGS-$(1))" LDFLAGS="$(LDFLAGS) $(FEATURE_CHECK_LDFLAGS-$(1))" -C $(feature_dir) test-$1.bin >/dev/null 2>/dev/null && echo 1 || echo 0)
+ feature-$(1) := $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CFLAGS="$(EXTRA_CFLAGS) $(FEATURE_CHECK_CFLAGS-$(1))" LDFLAGS="$(LDFLAGS) $(FEATURE_CHECK_LDFLAGS-$(1))" -C $(feature_dir) $(OUTPUT_FEATURES)test-$1.bin >/dev/null 2>/dev/null && echo 1 || echo 0)
endef
feature_set = $(eval $(feature_set_code))
diff --git a/tools/build/feature/Makefile b/tools/build/feature/Makefile
index cea04ce9f35c..bf8f0352264d 100644
--- a/tools/build/feature/Makefile
+++ b/tools/build/feature/Makefile
@@ -1,4 +1,3 @@
-
FILES= \
test-all.bin \
test-backtrace.bin \
@@ -38,38 +37,40 @@ FILES= \
test-bpf.bin \
test-get_cpuid.bin
+FILES := $(addprefix $(OUTPUT),$(FILES))
+
CC := $(CROSS_COMPILE)gcc -MD
PKG_CONFIG := $(CROSS_COMPILE)pkg-config
all: $(FILES)
-__BUILD = $(CC) $(CFLAGS) -Wall -Werror -o $(OUTPUT)$@ $(patsubst %.bin,%.c,$@) $(LDFLAGS)
- BUILD = $(__BUILD) > $(OUTPUT)$(@:.bin=.make.output) 2>&1
+__BUILD = $(CC) $(CFLAGS) -Wall -Werror -o $@ $(patsubst %.bin,%.c,$(@F)) $(LDFLAGS)
+ BUILD = $(__BUILD) > $(@:.bin=.make.output) 2>&1
###############################
-test-all.bin:
+$(OUTPUT)test-all.bin:
$(BUILD) -fstack-protector-all -O2 -D_FORTIFY_SOURCE=2 -ldw -lelf -lnuma -lelf -laudit -I/usr/include/slang -lslang $(shell $(PKG_CONFIG) --libs --cflags gtk+-2.0 2>/dev/null) $(FLAGS_PERL_EMBED) $(FLAGS_PYTHON_EMBED) -DPACKAGE='"perf"' -lbfd -ldl -lz -llzma
-test-hello.bin:
+$(OUTPUT)test-hello.bin:
$(BUILD)
-test-pthread-attr-setaffinity-np.bin:
+$(OUTPUT)test-pthread-attr-setaffinity-np.bin:
$(BUILD) -D_GNU_SOURCE -lpthread
-test-stackprotector-all.bin:
+$(OUTPUT)test-stackprotector-all.bin:
$(BUILD) -fstack-protector-all
-test-fortify-source.bin:
+$(OUTPUT)test-fortify-source.bin:
$(BUILD) -O2 -D_FORTIFY_SOURCE=2
-test-bionic.bin:
+$(OUTPUT)test-bionic.bin:
$(BUILD)
-test-libelf.bin:
+$(OUTPUT)test-libelf.bin:
$(BUILD) -lelf
-test-glibc.bin:
+$(OUTPUT)test-glibc.bin:
$(BUILD)
DWARFLIBS := -ldw
@@ -77,37 +78,37 @@ ifeq ($(findstring -static,${LDFLAGS}),-static)
DWARFLIBS += -lelf -lebl -lz -llzma -lbz2
endif
-test-dwarf.bin:
+$(OUTPUT)test-dwarf.bin:
$(BUILD) $(DWARFLIBS)
-test-libelf-mmap.bin:
+$(OUTPUT)test-libelf-mmap.bin:
$(BUILD) -lelf
-test-libelf-getphdrnum.bin:
+$(OUTPUT)test-libelf-getphdrnum.bin:
$(BUILD) -lelf
-test-libnuma.bin:
+$(OUTPUT)test-libnuma.bin:
$(BUILD) -lnuma
-test-numa_num_possible_cpus.bin:
+$(OUTPUT)test-numa_num_possible_cpus.bin:
$(BUILD) -lnuma
-test-libunwind.bin:
+$(OUTPUT)test-libunwind.bin:
$(BUILD) -lelf
-test-libunwind-debug-frame.bin:
+$(OUTPUT)test-libunwind-debug-frame.bin:
$(BUILD) -lelf
-test-libaudit.bin:
+$(OUTPUT)test-libaudit.bin:
$(BUILD) -laudit
-test-libslang.bin:
+$(OUTPUT)test-libslang.bin:
$(BUILD) -I/usr/include/slang -lslang
-test-gtk2.bin:
+$(OUTPUT)test-gtk2.bin:
$(BUILD) $(shell $(PKG_CONFIG) --libs --cflags gtk+-2.0 2>/dev/null)
-test-gtk2-infobar.bin:
+$(OUTPUT)test-gtk2-infobar.bin:
$(BUILD) $(shell $(PKG_CONFIG) --libs --cflags gtk+-2.0 2>/dev/null)
grep-libs = $(filter -l%,$(1))
@@ -119,63 +120,63 @@ PERL_EMBED_LIBADD = $(call grep-libs,$(PERL_EMBED_LDOPTS))
PERL_EMBED_CCOPTS = `perl -MExtUtils::Embed -e ccopts 2>/dev/null`
FLAGS_PERL_EMBED=$(PERL_EMBED_CCOPTS) $(PERL_EMBED_LDOPTS)
-test-libperl.bin:
+$(OUTPUT)test-libperl.bin:
$(BUILD) $(FLAGS_PERL_EMBED)
-test-libpython.bin:
+$(OUTPUT)test-libpython.bin:
$(BUILD)
-test-libpython-version.bin:
+$(OUTPUT)test-libpython-version.bin:
$(BUILD)
-test-libbfd.bin:
+$(OUTPUT)test-libbfd.bin:
$(BUILD) -DPACKAGE='"perf"' -lbfd -lz -liberty -ldl
-test-liberty.bin:
- $(CC) $(CFLAGS) -Wall -Werror -o $(OUTPUT)$@ test-libbfd.c -DPACKAGE='"perf"' $(LDFLAGS) -lbfd -ldl -liberty
+$(OUTPUT)test-liberty.bin:
+ $(CC) $(CFLAGS) -Wall -Werror -o $@ test-libbfd.c -DPACKAGE='"perf"' $(LDFLAGS) -lbfd -ldl -liberty
-test-liberty-z.bin:
- $(CC) $(CFLAGS) -Wall -Werror -o $(OUTPUT)$@ test-libbfd.c -DPACKAGE='"perf"' $(LDFLAGS) -lbfd -ldl -liberty -lz
+$(OUTPUT)test-liberty-z.bin:
+ $(CC) $(CFLAGS) -Wall -Werror -o $@ test-libbfd.c -DPACKAGE='"perf"' $(LDFLAGS) -lbfd -ldl -liberty -lz
-test-cplus-demangle.bin:
+$(OUTPUT)test-cplus-demangle.bin:
$(BUILD) -liberty
-test-backtrace.bin:
+$(OUTPUT)test-backtrace.bin:
$(BUILD)
-test-timerfd.bin:
+$(OUTPUT)test-timerfd.bin:
$(BUILD)
-test-libdw-dwarf-unwind.bin:
+$(OUTPUT)test-libdw-dwarf-unwind.bin:
$(BUILD) # -ldw provided by $(FEATURE_CHECK_LDFLAGS-libdw-dwarf-unwind)
-test-libbabeltrace.bin:
+$(OUTPUT)test-libbabeltrace.bin:
$(BUILD) # -lbabeltrace provided by $(FEATURE_CHECK_LDFLAGS-libbabeltrace)
-test-sync-compare-and-swap.bin:
+$(OUTPUT)test-sync-compare-and-swap.bin:
$(BUILD)
-test-compile-32.bin:
- $(CC) -m32 -o $(OUTPUT)$@ test-compile.c
+$(OUTPUT)test-compile-32.bin:
+ $(CC) -m32 -o $@ test-compile.c
-test-compile-x32.bin:
- $(CC) -mx32 -o $(OUTPUT)$@ test-compile.c
+$(OUTPUT)test-compile-x32.bin:
+ $(CC) -mx32 -o $@ test-compile.c
-test-zlib.bin:
+$(OUTPUT)test-zlib.bin:
$(BUILD) -lz
-test-lzma.bin:
+$(OUTPUT)test-lzma.bin:
$(BUILD) -llzma
-test-get_cpuid.bin:
+$(OUTPUT)test-get_cpuid.bin:
$(BUILD)
-test-bpf.bin:
+$(OUTPUT)test-bpf.bin:
$(BUILD)
--include *.d
+-include $(OUTPUT)*.d
###############################
clean:
- rm -f $(FILES) *.d $(FILES:.bin=.make.output)
+ rm -f $(FILES) $(OUTPUT)*.d $(FILES:.bin=.make.output)
--
2.1.0
next prev parent reply other threads:[~2015-12-17 0:51 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-17 0:47 [GIT PULL 00/10] perf/core improvements Arnaldo Carvalho de Melo
2015-12-17 0:47 ` [PATCH 01/10] perf record: Add record.build-id config option Arnaldo Carvalho de Melo
2015-12-17 0:47 ` Arnaldo Carvalho de Melo [this message]
2015-12-17 0:47 ` [PATCH 03/10] perf tools: Move strlcpy() from perf to tools/lib/string.c Arnaldo Carvalho de Melo
2015-12-17 0:47 ` [PATCH 04/10] perf tools: Document the fact that parse_options*() may exit Arnaldo Carvalho de Melo
2015-12-17 0:47 ` [PATCH 05/10] perf tools: Provide subcmd configuration at runtime Arnaldo Carvalho de Melo
2015-12-17 0:47 ` [PATCH 06/10] perf tools: Remove subcmd dependencies on strbuf Arnaldo Carvalho de Melo
2015-12-17 0:48 ` [PATCH 07/10] perf tools: Remove 'perf' from subcmd function and variable names Arnaldo Carvalho de Melo
2015-12-17 0:48 ` [PATCH 08/10] perf tools: Finalize subcmd independence Arnaldo Carvalho de Melo
2015-12-17 0:48 ` [PATCH 09/10] perf subcmd: Create subcmd library Arnaldo Carvalho de Melo
2015-12-17 0:48 ` [PATCH 10/10] tools subcmd: Rename subcmd header include guards Arnaldo Carvalho de Melo
2015-12-17 17:37 ` [GIT PULL 00/10] perf/core improvements Arnaldo Carvalho de Melo
2015-12-18 8:39 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1450313283-25348-3-git-send-email-acme@kernel.org \
--to=acme@kernel.org \
--cc=acme@redhat.com \
--cc=jpoimboe@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=namhyung@kernel.org \
--cc=peterz@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.