From: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 2/5] usb: dwc2: Use shared wait_for_bit
Date: Sun, 27 Dec 2015 18:28:09 +0100 [thread overview]
Message-ID: <1451237293-24497-3-git-send-email-mateusz.kulikowski@gmail.com> (raw)
In-Reply-To: <1451237293-24497-1-git-send-email-mateusz.kulikowski@gmail.com>
Use existing library function to poll bit(s).
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
---
drivers/usb/host/dwc2.c | 41 +++++++++++++----------------------------
1 file changed, 13 insertions(+), 28 deletions(-)
diff --git a/drivers/usb/host/dwc2.c b/drivers/usb/host/dwc2.c
index 541c0f9..42d31e3 100644
--- a/drivers/usb/host/dwc2.c
+++ b/drivers/usb/host/dwc2.c
@@ -13,6 +13,7 @@
#include <memalign.h>
#include <phys2bus.h>
#include <usbroothubdes.h>
+#include <wait_bit.h>
#include <asm/io.h>
#include "dwc2.h"
@@ -52,27 +53,6 @@ static struct dwc2_priv local;
/*
* DWC2 IP interface
*/
-static int wait_for_bit(void *reg, const uint32_t mask, bool set)
-{
- unsigned int timeout = 1000000;
- uint32_t val;
-
- while (--timeout) {
- val = readl(reg);
- if (!set)
- val = ~val;
-
- if ((val & mask) == mask)
- return 0;
-
- udelay(1);
- }
-
- debug("%s: Timeout (reg=%p mask=%08x wait_set=%i)\n",
- __func__, reg, mask, set);
-
- return -ETIMEDOUT;
-}
/*
* Initializes the FSLSPClkSel field of the HCFG register
@@ -117,7 +97,8 @@ static void dwc_otg_flush_tx_fifo(struct dwc2_core_regs *regs, const int num)
writel(DWC2_GRSTCTL_TXFFLSH | (num << DWC2_GRSTCTL_TXFNUM_OFFSET),
®s->grstctl);
- ret = wait_for_bit(®s->grstctl, DWC2_GRSTCTL_TXFFLSH, 0);
+ ret = wait_for_bit(__func__, ®s->grstctl, DWC2_GRSTCTL_TXFFLSH,
+ false, 1000, false);
if (ret)
printf("%s: Timeout!\n", __func__);
@@ -135,7 +116,8 @@ static void dwc_otg_flush_rx_fifo(struct dwc2_core_regs *regs)
int ret;
writel(DWC2_GRSTCTL_RXFFLSH, ®s->grstctl);
- ret = wait_for_bit(®s->grstctl, DWC2_GRSTCTL_RXFFLSH, 0);
+ ret = wait_for_bit(__func__, ®s->grstctl, DWC2_GRSTCTL_RXFFLSH,
+ false, 1000, false);
if (ret)
printf("%s: Timeout!\n", __func__);
@@ -152,13 +134,15 @@ static void dwc_otg_core_reset(struct dwc2_core_regs *regs)
int ret;
/* Wait for AHB master IDLE state. */
- ret = wait_for_bit(®s->grstctl, DWC2_GRSTCTL_AHBIDLE, 1);
+ ret = wait_for_bit(__func__, ®s->grstctl, DWC2_GRSTCTL_AHBIDLE,
+ true, 1000, false);
if (ret)
printf("%s: Timeout!\n", __func__);
/* Core Soft Reset */
writel(DWC2_GRSTCTL_CSFTRST, ®s->grstctl);
- ret = wait_for_bit(®s->grstctl, DWC2_GRSTCTL_CSFTRST, 0);
+ ret = wait_for_bit(__func__, ®s->grstctl, DWC2_GRSTCTL_CSFTRST,
+ false, 1000, false);
if (ret)
printf("%s: Timeout!\n", __func__);
@@ -243,8 +227,8 @@ static void dwc_otg_core_host_init(struct dwc2_core_regs *regs)
clrsetbits_le32(®s->hc_regs[i].hcchar,
DWC2_HCCHAR_EPDIR,
DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS);
- ret = wait_for_bit(®s->hc_regs[i].hcchar,
- DWC2_HCCHAR_CHEN, 0);
+ ret = wait_for_bit(__func__, ®s->hc_regs[i].hcchar,
+ DWC2_HCCHAR_CHEN, false, 1000, false);
if (ret)
printf("%s: Timeout!\n", __func__);
}
@@ -737,7 +721,8 @@ int wait_for_chhltd(struct dwc2_core_regs *regs, uint32_t *sub, int *toggle,
int ret;
uint32_t hcint, hctsiz;
- ret = wait_for_bit(&hc_regs->hcint, DWC2_HCINT_CHHLTD, true);
+ ret = wait_for_bit(__func__, &hc_regs->hcint, DWC2_HCINT_CHHLTD, true,
+ 1000, false);
if (ret)
return ret;
--
2.5.0
next prev parent reply other threads:[~2015-12-27 17:28 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-27 17:28 [U-Boot] [PATCH v3 0/5] Add wait_for_bit() Mateusz Kulikowski
2015-12-27 17:28 ` [U-Boot] [PATCH v3 1/5] lib: Add wait_for_bit Mateusz Kulikowski
2015-12-31 13:07 ` Mateusz Kulikowski
2016-01-14 20:08 ` Tom Rini
2016-01-20 4:34 ` Simon Glass
2016-01-20 21:03 ` Mateusz Kulikowski
2016-01-21 2:45 ` Simon Glass
2016-01-21 19:11 ` Tom Rini
2015-12-27 17:28 ` Mateusz Kulikowski [this message]
2015-12-27 22:17 ` [U-Boot] [PATCH v3 2/5] usb: dwc2: Use shared wait_for_bit Stefan Bruens
2015-12-31 11:31 ` Mateusz Kulikowski
2016-01-14 20:08 ` Tom Rini
2015-12-27 17:28 ` [U-Boot] [PATCH v3 3/5] usb: ohci-lpc32xx: " Mateusz Kulikowski
2016-01-14 20:08 ` Tom Rini
2015-12-27 17:28 ` [U-Boot] [PATCH v3 4/5] usb: ehci-mx6: " Mateusz Kulikowski
2016-01-14 20:08 ` Tom Rini
2015-12-27 17:28 ` [U-Boot] [PATCH v3 5/5] net: zynq_gem: " Mateusz Kulikowski
2016-01-14 20:08 ` Tom Rini
2016-01-15 21:31 ` Moritz Fischer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1451237293-24497-3-git-send-email-mateusz.kulikowski@gmail.com \
--to=mateusz.kulikowski@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.