From: Purna Chandra Mandal <purna.mandal@microchip.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 03/13] drivers: pinctrl: Add pinctrl driver for Microchip PIC32 microcontroller
Date: Mon, 4 Jan 2016 19:30:50 +0530 [thread overview]
Message-ID: <1451916050.27601.119.camel@microchip.com> (raw)
Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
---
Changes in v2:
- add routine to configure pin properties
drivers/pinctrl/Kconfig | 6 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl_pic32.c | 284 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 291 insertions(+)
create mode 100644 drivers/pinctrl/pinctrl_pic32.c
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 57e6142..a4acaf3 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -131,6 +131,12 @@ config PINCTRL_SANDBOX
actually does nothing but print debug messages when pinctrl
operations are invoked.
+config PIC32_PINCTRL
+ bool "Microchip PIC32 pin-control driver"
+ depends on DM && MACH_PIC32
+ help
+ Support pin multiplexing control on Microchip PIC32 SoCs.
+
endif
source "drivers/pinctrl/uniphier/Kconfig"
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 70d25dc..b4f4650 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
obj-$(CONFIG_PINCTRL_SANDBOX) += pinctrl-sandbox.o
obj-$(CONFIG_ARCH_UNIPHIER) += uniphier/
+obj-$(CONFIG_PIC32_PINCTRL) += pinctrl_pic32.o
diff --git a/drivers/pinctrl/pinctrl_pic32.c b/drivers/pinctrl/pinctrl_pic32.c
new file mode 100644
index 0000000..043f589
--- /dev/null
+++ b/drivers/pinctrl/pinctrl_pic32.c
@@ -0,0 +1,284 @@
+/*
+ * Pinctrl driver for Microchip PIC32 SoCs
+ * Copyright (c) 2015 Microchip Technology Inc.
+ * Written by Purna Chandra Mandal <purna.mandal@microchip.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <dm/pinctrl.h>
+#include <dm/root.h>
+#include <mach/pic32.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Peripheral PORTA-PORTK / PORT0-PORT9 */
+enum {
+ PIC32_PORT_A = 0,
+ PIC32_PORT_B = 1,
+ PIC32_PORT_C = 2,
+ PIC32_PORT_D = 3,
+ PIC32_PORT_E = 4,
+ PIC32_PORT_F = 5,
+ PIC32_PORT_G = 6,
+ PIC32_PORT_H = 7,
+ PIC32_PORT_J = 8, /* no PORT_I */
+ PIC32_PORT_K = 9,
+ PIC32_PORT_MAX
+};
+
+/* Input pinmux reg offset */
+#define U1RXR 0x0068
+#define U2RXR 0x0070
+#define SDI1R 0x009c
+#define SDI2R 0x00a8
+
+/* Output pinmux reg offset */
+#define PPS_OUT(__port, __pin) (((__port) * 16 + (__pin)) << 2)
+
+/* Port config/control registers */
+struct pic32_reg_port {
+ struct pic32_reg_atomic ansel;
+ struct pic32_reg_atomic tris;
+ struct pic32_reg_atomic port;
+ struct pic32_reg_atomic lat;
+ struct pic32_reg_atomic odc;
+ struct pic32_reg_atomic cnpu;
+ struct pic32_reg_atomic cnpd;
+ struct pic32_reg_atomic cncon;
+};
+
+#define PIN_CONFIG_PIC32_DIGITAL (PIN_CONFIG_END + 1)
+#define PIN_CONFIG_PIC32_ANALOG (PIN_CONFIG_END + 2)
+
+struct pic32_pin_config {
+ u16 port;
+ u16 pin;
+ u32 flags;
+};
+
+#define PIN_CONFIG(_prt, _pin, _cfg) \
+ {.port = (_prt), .pin = (_pin), .flags = (_cfg), }
+
+enum {
+ PERIPH_ID_UART1,
+ PERIPH_ID_UART2,
+ PERIPH_ID_ETH,
+ PERIPH_ID_USB,
+ PERIPH_ID_SDHCI,
+ PERIPH_ID_I2C1,
+ PERIPH_ID_I2C2,
+ PERIPH_ID_SPI1,
+ PERIPH_ID_SPI2,
+ PERIPH_ID_SQI,
+};
+
+struct pic32_pinctrl_priv {
+ void __iomem *mux_in;
+ void __iomem *mux_out;
+ void __iomem *pinconf;
+};
+
+static int pic32_pinconfig_one(struct pic32_pinctrl_priv *priv,
+ u32 port, u32 pin, u32 param)
+{
+ struct pic32_reg_port *regs;
+
+ regs = (struct pic32_reg_port *)(priv->pinconf + port * 0x100);
+ switch (param) {
+ case PIN_CONFIG_PIC32_DIGITAL:
+ writel(BIT(pin), ®s->ansel.clr);
+ break;
+ case PIN_CONFIG_PIC32_ANALOG:
+ writel(BIT(pin), ®s->ansel.set);
+ break;
+ case PIN_CONFIG_INPUT_ENABLE:
+ writel(BIT(pin), ®s->tris.set);
+ break;
+ case PIN_CONFIG_OUTPUT:
+ writel(BIT(pin), ®s->tris.clr);
+ break;
+ case PIN_CONFIG_BIAS_PULL_UP:
+ writel(BIT(pin), ®s->cnpu.set);
+ break;
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ writel(BIT(pin), ®s->cnpd.set);
+ break;
+ case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+ writel(BIT(pin), ®s->odc.set);
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int pic32_pinconfig_set(struct pic32_pinctrl_priv *priv,
+ struct pic32_pin_config *list, int count)
+{
+ int i;
+
+ for (i = 0 ; i < count; i++)
+ pic32_pinconfig_one(priv, list[i].port,
+ list[i].pin, list[i].flags);
+
+ return 0;
+}
+
+static void _eth_pin_config(struct udevice *dev)
+{
+ struct pic32_pinctrl_priv *priv = dev_get_priv(dev);
+ struct pic32_pin_config configs[] = {
+ /* EMDC - D11 */
+ PIN_CONFIG(PIC32_PORT_D, 11, PIN_CONFIG_PIC32_DIGITAL),
+ PIN_CONFIG(PIC32_PORT_D, 11, PIN_CONFIG_OUTPUT),
+ /* ETXEN */
+ PIN_CONFIG(PIC32_PORT_D, 6, PIN_CONFIG_PIC32_DIGITAL),
+ PIN_CONFIG(PIC32_PORT_D, 6, PIN_CONFIG_OUTPUT),
+ /* ECRSDV */
+ PIN_CONFIG(PIC32_PORT_H, 13, PIN_CONFIG_PIC32_DIGITAL),
+ PIN_CONFIG(PIC32_PORT_H, 13, PIN_CONFIG_INPUT_ENABLE),
+ /* ERXD0 */
+ PIN_CONFIG(PIC32_PORT_H, 8, PIN_CONFIG_PIC32_DIGITAL),
+ PIN_CONFIG(PIC32_PORT_H, 8, PIN_CONFIG_INPUT_ENABLE),
+ PIN_CONFIG(PIC32_PORT_H, 8, PIN_CONFIG_BIAS_PULL_DOWN),
+ /* ERXD1 */
+ PIN_CONFIG(PIC32_PORT_H, 5, PIN_CONFIG_PIC32_DIGITAL),
+ PIN_CONFIG(PIC32_PORT_H, 5, PIN_CONFIG_INPUT_ENABLE),
+ PIN_CONFIG(PIC32_PORT_H, 5, PIN_CONFIG_BIAS_PULL_DOWN),
+ /* EREFCLK */
+ PIN_CONFIG(PIC32_PORT_J, 11, PIN_CONFIG_PIC32_DIGITAL),
+ PIN_CONFIG(PIC32_PORT_J, 11, PIN_CONFIG_INPUT_ENABLE),
+ /* ETXD1 */
+ PIN_CONFIG(PIC32_PORT_J, 9, PIN_CONFIG_PIC32_DIGITAL),
+ PIN_CONFIG(PIC32_PORT_J, 9, PIN_CONFIG_OUTPUT),
+ /* ETXD0 */
+ PIN_CONFIG(PIC32_PORT_J, 8, PIN_CONFIG_PIC32_DIGITAL),
+ PIN_CONFIG(PIC32_PORT_J, 8, PIN_CONFIG_OUTPUT),
+ /* EMDIO */
+ PIN_CONFIG(PIC32_PORT_J, 1, PIN_CONFIG_PIC32_DIGITAL),
+ PIN_CONFIG(PIC32_PORT_J, 1, PIN_CONFIG_INPUT_ENABLE),
+ /* ERXERR */
+ PIN_CONFIG(PIC32_PORT_F, 3, PIN_CONFIG_PIC32_DIGITAL),
+ PIN_CONFIG(PIC32_PORT_F, 3, PIN_CONFIG_INPUT_ENABLE),
+ };
+
+ pic32_pinconfig_set(priv, configs, ARRAY_SIZE(configs));
+}
+
+static int pic32_pinctrl_request(struct udevice *dev, int func, int flags)
+{
+ struct pic32_pinctrl_priv *priv = dev_get_priv(dev);
+
+ switch (func) {
+ case PERIPH_ID_UART2:
+ /* PPS for U2 RX/TX */
+ writel(0x02, priv->mux_out + PPS_OUT(PIC32_PORT_G, 9));
+ writel(0x05, priv->mux_in + U2RXR); /* B0 */
+ /* set digital mode */
+ pic32_pinconfig_one(priv, PIC32_PORT_G, 9,
+ PIN_CONFIG_PIC32_DIGITAL);
+ pic32_pinconfig_one(priv, PIC32_PORT_B, 0,
+ PIN_CONFIG_PIC32_DIGITAL);
+ break;
+ case PERIPH_ID_ETH:
+ _eth_pin_config(dev);
+ break;
+ case PERIPH_ID_SDHCI:
+ break;
+ case PERIPH_ID_USB:
+ break;
+ default:
+ debug("%s: unknown-unhandled case\n", __func__);
+ break;
+ }
+
+ return 0;
+}
+
+static int pic32_pinctrl_get_periph_id(struct udevice *dev,
+ struct udevice *periph)
+{
+ int ret;
+ u32 cell[2];
+
+ ret = fdtdec_get_int_array(gd->fdt_blob, periph->of_offset,
+ "interrupts", cell, ARRAY_SIZE(cell));
+ if (ret < 0)
+ return -EINVAL;
+
+ /* interrupt number */
+ switch (cell[0]) {
+ case 112 ... 114:
+ return PERIPH_ID_UART1;
+ case 145 ... 147:
+ return PERIPH_ID_UART2;
+ case 109 ... 111:
+ return PERIPH_ID_SPI1;
+ case 142 ... 144:
+ return PERIPH_ID_SPI2;
+ case 115 ... 117:
+ return PERIPH_ID_I2C1;
+ case 148 ... 150:
+ return PERIPH_ID_I2C2;
+ case 132 ... 133:
+ return PERIPH_ID_USB;
+ case 169:
+ return PERIPH_ID_SQI;
+ case 191:
+ return PERIPH_ID_SDHCI;
+ case 153:
+ return PERIPH_ID_ETH;
+ default:
+ break;
+ }
+
+ return -ENOENT;
+}
+
+static int pic32_pinctrl_set_state_simple(struct udevice *dev,
+ struct udevice *periph)
+{
+ int func;
+
+ debug("%s: periph %s\n", __func__, periph->name);
+ func = pic32_pinctrl_get_periph_id(dev, periph);
+ if (func < 0)
+ return func;
+ return pic32_pinctrl_request(dev, func, 0);
+}
+
+static struct pinctrl_ops pic32_pinctrl_ops = {
+ .set_state_simple = pic32_pinctrl_set_state_simple,
+ .request = pic32_pinctrl_request,
+ .get_periph_id = pic32_pinctrl_get_periph_id,
+};
+
+static int pic32_pinctrl_probe(struct udevice *dev)
+{
+ struct pic32_pinctrl_priv *priv = dev_get_priv(dev);
+
+ priv->mux_in = pic32_ioremap(PPS_IN_BASE);
+ priv->mux_out = pic32_ioremap(PPS_OUT_BASE);
+ priv->pinconf = pic32_ioremap(PINCTRL_BASE);
+
+ return 0;
+}
+
+static const struct udevice_id pic32_pinctrl_ids[] = {
+ { .compatible = "microchip,pic32mzda-pinctrl" },
+ { }
+};
+
+U_BOOT_DRIVER(pinctrl_pic32) = {
+ .name = "pinctrl_pic32",
+ .id = UCLASS_PINCTRL,
+ .of_match = pic32_pinctrl_ids,
+ .ops = &pic32_pinctrl_ops,
+ .probe = pic32_pinctrl_probe,
+ .priv_auto_alloc_size = sizeof(struct pic32_pinctrl_priv),
+};
--
1.8.3.1
next reply other threads:[~2016-01-04 14:00 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-04 14:00 Purna Chandra Mandal [this message]
2016-01-08 3:34 ` [U-Boot] [PATCH v2 03/13] drivers: pinctrl: Add pinctrl driver for Microchip PIC32 microcontroller Simon Glass
2016-01-08 6:46 ` Purna Chandra Mandal
2016-01-11 16:58 ` Simon Glass
2016-01-12 5:02 ` Purna Chandra Mandal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1451916050.27601.119.camel@microchip.com \
--to=purna.mandal@microchip.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.