[U-Boot] [PATCH v2 07/13] board: Add Microchip PIC32MZ[DA]-Starter-Kit board.

[Purna Chandra Mandal <purna.mandal@microchip.com>]

This adds support for Microchip PIC32MZ[DA] Starter Kit board
based on a PIC32MZ[DA] family of microcontroller.

Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>

---

Changes in v2:
- move CONFIG_SYS_TEXT_BASE (from board/<>/config.mk) to include/configs/<board>.h

 arch/mips/dts/Makefile                |   2 +-
 arch/mips/dts/pic32mzda_sk.dts        |  38 +++++++++++++
 arch/mips/mach-pic32/Kconfig          |   7 +++
 board/microchip/pic32mzda/Kconfig     |  13 +++++
 board/microchip/pic32mzda/MAINTAINERS |   6 ++
 board/microchip/pic32mzda/Makefile    |   7 +++
 board/microchip/pic32mzda/README      |  22 ++++++++
 board/microchip/pic32mzda/pic32mzda.c |  31 +++++++++++
 configs/pic32mzdask_defconfig         |  21 +++++++
 include/configs/pic32mzdask.h         | 100 ++++++++++++++++++++++++++++++++++
 10 files changed, 246 insertions(+), 1 deletion(-)
 create mode 100644 arch/mips/dts/pic32mzda_sk.dts
 create mode 100644 board/microchip/pic32mzda/Kconfig
 create mode 100644 board/microchip/pic32mzda/MAINTAINERS
 create mode 100644 board/microchip/pic32mzda/Makefile
 create mode 100644 board/microchip/pic32mzda/README
 create mode 100644 board/microchip/pic32mzda/pic32mzda.c
 create mode 100644 configs/pic32mzdask_defconfig
 create mode 100644 include/configs/pic32mzdask.h

diff --git a/arch/mips/dts/Makefile b/arch/mips/dts/Makefile
index 47b6eb5..b513918 100644
--- a/arch/mips/dts/Makefile
+++ b/arch/mips/dts/Makefile
@@ -2,7 +2,7 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-dtb-y +=
+dtb-$(CONFIG_TARGET_PIC32MZDASK) += pic32mzda_sk.dtb
 
 targets += $(dtb-y)
 
diff --git a/arch/mips/dts/pic32mzda_sk.dts b/arch/mips/dts/pic32mzda_sk.dts
new file mode 100644
index 0000000..99e7f64
--- /dev/null
+++ b/arch/mips/dts/pic32mzda_sk.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2015 Purna Chandra Mandal, purna.mandal at microchip.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "pic32mzda.dtsi"
+
+/ {
+	model = "Microchip PIC32MZDASK";
+	compatible = "microchip,pic32mzdask", "microchip,pic32mzda";
+
+	aliases {
+		console = &uart2;
+		serial0 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&clock {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+};
+
+&uart2 {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+};
diff --git a/arch/mips/mach-pic32/Kconfig b/arch/mips/mach-pic32/Kconfig
index a394791..f357fc6 100644
--- a/arch/mips/mach-pic32/Kconfig
+++ b/arch/mips/mach-pic32/Kconfig
@@ -26,6 +26,13 @@ endchoice
 choice
 	prompt "Board select"
 
+config TARGET_PIC32MZDASK
+	bool "Microchip PIC32MZ[DA] Starter Kit"
+	depends on SOC_PIC32MZDA
+	help
+	  This supports Microchip PIC32MZ[DA] Starter Kit.
+
 endchoice
 
+source "board/microchip/pic32mzda/Kconfig"
 endmenu
diff --git a/board/microchip/pic32mzda/Kconfig b/board/microchip/pic32mzda/Kconfig
new file mode 100644
index 0000000..8acb393
--- /dev/null
+++ b/board/microchip/pic32mzda/Kconfig
@@ -0,0 +1,13 @@
+
+if TARGET_PIC32MZDASK
+
+config SYS_BOARD
+	default "pic32mzda"
+
+config SYS_VENDOR
+	default "microchip"
+
+config SYS_CONFIG_NAME
+	default "pic32mzdask"
+
+endif
diff --git a/board/microchip/pic32mzda/MAINTAINERS b/board/microchip/pic32mzda/MAINTAINERS
new file mode 100644
index 0000000..c934f1a
--- /dev/null
+++ b/board/microchip/pic32mzda/MAINTAINERS
@@ -0,0 +1,6 @@
+PIC32MZDASK BOARD
+M:	Purna Chandra Mandal <purna.mandal@microchip.com>
+S:	Maintained
+F:	board/microchip/pic32mzda/
+F:	include/configs/pic32mzdask.h
+F:	configs/pic32mzdask_defconfig
diff --git a/board/microchip/pic32mzda/Makefile b/board/microchip/pic32mzda/Makefile
new file mode 100644
index 0000000..3629530
--- /dev/null
+++ b/board/microchip/pic32mzda/Makefile
@@ -0,0 +1,7 @@
+#
+# (C) Copyright 2015
+# Purna Chandra Mandal, purna.mandal at microchip.com.
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+obj-y := pic32mzda.o
diff --git a/board/microchip/pic32mzda/README b/board/microchip/pic32mzda/README
new file mode 100644
index 0000000..91d16ab
--- /dev/null
+++ b/board/microchip/pic32mzda/README
@@ -0,0 +1,22 @@
+/*
+ * (c) 2015 Purna Chandra Mandal <purna.mandal@microchip.com>
+ */
+
+PIC32MZ[DA] Starter Kit
+----------------------------------------
+PIC32MZ[DA] Starter Kit is based on PIC32MZ[DA] family of micro-controller.
+This family is powered by MIPS M14KEC 32bit general purpose core and has
+advanced microcontroller features and peripherals.
+
+This processor boots with proprietary stage1 bootloader running from internal
+boot-flash. Stage1 bootloader inturns locates and jumps to U-Boot programmed
+on internal program-flash. Finally U-Boot loads OS image (along with other
+required files for booting) from either uSD card, or ethernet, or from USB
+storage.
+
+To boot Linux following three files are mandatory - uEnv.txt (custom U-Boot
+environment file), uImage, *.dtb (platform device-tree-blob file).
+
+U-Boot jumps to Linux using UHI specification.
+
+Visit http://microchip.com for details.
diff --git a/board/microchip/pic32mzda/pic32mzda.c b/board/microchip/pic32mzda/pic32mzda.c
new file mode 100644
index 0000000..afe2ab8
--- /dev/null
+++ b/board/microchip/pic32mzda/pic32mzda.c
@@ -0,0 +1,31 @@
+/*
+ * Microchip PIC32MZ[DA] Starter Kit board
+ *
+ * Copyright (C) 2015, Microchip Technology Inc.
+ * Purna Chandra Mandal <purna.mandal@microchip.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <clk.h>
+#include <mach/pic32.h>
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+	ulong rate = 0;
+	struct udevice *dev;
+
+	printf("Core: %s\n", get_core_name());
+
+	if (!uclass_get_device(UCLASS_CLK, 0, &dev)) {
+		rate = clk_get_rate(dev);
+		printf("CPU Speed: %lu MHz\n", rate / 1000000);
+	}
+
+	return 0;
+}
+#endif
diff --git a/configs/pic32mzdask_defconfig b/configs/pic32mzdask_defconfig
new file mode 100644
index 0000000..13760e6
--- /dev/null
+++ b/configs/pic32mzdask_defconfig
@@ -0,0 +1,21 @@
+CONFIG_MIPS=y
+CONFIG_MACH_PIC32=y
+CONFIG_SOC_PIC32MZDA=y
+CONFIG_TARGET_PIC32MZDASK=y
+CONFIG_SYS_LITTLE_ENDIAN=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="dask # "
+CONFIG_CMD_TIME=y
+# CONFIG_CMD_IMLS is not set
+CONFIG_SUPPORT_OF_CONTROL=y
+CONFIG_OF_EMBED=y
+CONFIG_DEFAULT_DEVICE_TREE="pic32mzda_sk"
+CONFIG_DM=y
+CONFIG_CMD_DM=y
+CONFIG_DM_SERIAL=y
+CONFIG_PIC32_SERIAL=y
+CONFIG_CLK=y
+CONFIG_PINCTRL=y
+# CONFIG_PINCTRL_FULL is not set
+CONFIG_PIC32_PINCTRL=y
diff --git a/include/configs/pic32mzdask.h b/include/configs/pic32mzdask.h
new file mode 100644
index 0000000..3624107
--- /dev/null
+++ b/include/configs/pic32mzdask.h
@@ -0,0 +1,100 @@
+/*
+ * (c) 2015 Purna Chandra Mandal <purna.mandal@microchip.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * Microchip PIC32MZ[DA] Starter Kit.
+ */
+
+#ifndef __PIC32MZDASK_CONFIG_H
+#define __PIC32MZDASK_CONFIG_H
+
+/* System Configuration */
+#define CONFIG_SYS_TEXT_BASE		0x9d004000 /* .text */
+#define CONFIG_DISPLAY_BOARDINFO
+
+/*--------------------------------------------
+ * CPU configuration
+ */
+/* CPU Timer rate */
+#define CONFIG_SYS_MIPS_TIMER_FREQ	100000000
+
+/* Cache Configuration */
+#define CONFIG_SYS_MIPS_CACHE_MODE	CONF_CM_CACHABLE_NONCOHERENT
+#undef CONFIG_SKIP_LOWLEVEL_INIT
+
+/*----------------------------------------------------------------------
+ * Memory Layout
+ */
+#define CONFIG_SYS_SRAM_BASE		0x80000000
+#define CONFIG_SYS_SRAM_SIZE		0x00080000 /* 512K */
+
+/* Initial RAM for temporary stack, global data */
+#define CONFIG_SYS_INIT_RAM_SIZE	0x10000
+#define CONFIG_SYS_INIT_RAM_ADDR	\
+	(CONFIG_SYS_SRAM_BASE + CONFIG_SYS_SRAM_SIZE - CONFIG_SYS_INIT_RAM_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET	\
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_SP_ADDR		\
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* SDRAM Configuration (for final code, data, stack, heap) */
+#define CONFIG_SYS_SDRAM_BASE		0x88000000
+#define CONFIG_SYS_MALLOC_LEN		(256 << 10)
+#define CONFIG_SYS_BOOTPARAMS_LEN	(4 << 10)
+#define CONFIG_STACKSIZE		(4 << 10) /* regular stack */
+
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(192 << 10)
+
+#define CONFIG_SYS_LOAD_ADDR		0x88500000 /* default load address */
+#define CONFIG_SYS_ENV_ADDR		0x88300000
+
+/* Memory Test */
+#define CONFIG_SYS_MEMTEST_START	0x88000000
+#define CONFIG_SYS_MEMTEST_END		0x88080000
+
+/*----------------------------------------------------------------------
+ * Commands
+ */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_CMD_CLK
+#define CONFIG_CMD_MEMTEST
+#define CONFIG_CMD_MEMINFO
+
+/*-------------------------------------------------
+ * FLASH configuration
+ */
+#define CONFIG_SYS_NO_FLASH
+
+/*------------------------------------------------------------
+ * Console Configuration
+ */
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
+#define CONFIG_SYS_CBSIZE		1024 /* Console I/O Buffer Size   */
+#define CONFIG_SYS_MAXARGS		16   /* max number of command args*/
+#define CONFIG_SYS_PBSIZE		\
+		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_CMDLINE_EDITING		1
+
+/*
+ * Handover flattened device tree (dtb file) to Linux kernel
+ */
+#define CONFIG_OF_LIBFDT	1
+
+/* -------------------------------------------------
+ * Environment
+ */
+#define CONFIG_ENV_IS_NOWHERE	1
+#define CONFIG_ENV_SIZE		0x4000
+
+/* ---------------------------------------------------------------------
+ * Board boot configuration
+ */
+#define CONFIG_TIMESTAMP	/* Print image info with timestamp */
+#define CONFIG_BOOTDELAY	5 /* autoboot after X seconds     */
+#undef	CONFIG_BOOTARGS
+
+#endif	/* __PIC32MZDASK_CONFIG_H */
-- 
1.8.3.1