[U-Boot] [PATCH 1/2] mx6cuboxi: Fix the delay for the AR8035 PHY

[Fabio Estevam <festevam@gmail.com>]

From: Fabio Estevam <fabio.estevam@nxp.com>

As per the AR8035 datasheet:

"For a reliable power on reset, suggest to keep asserting the reset
low long enough (10ms) to ensure the clock is stable and clock-to-reset
1ms requirement is satisfied."

So do as suggested and keep the reset low for 10ms.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
 board/solidrun/mx6cuboxi/mx6cuboxi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/board/solidrun/mx6cuboxi/mx6cuboxi.c b/board/solidrun/mx6cuboxi/mx6cuboxi.c
index fc37f1e..20faffc 100644
--- a/board/solidrun/mx6cuboxi/mx6cuboxi.c
+++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c
@@ -143,7 +143,7 @@ static void setup_iomux_enet(void)
 	SETUP_IOMUX_PADS(enet_pads);
 
 	gpio_direction_output(ETH_PHY_RESET, 0);
-	mdelay(2);
+	mdelay(10);
 	gpio_set_value(ETH_PHY_RESET, 1);
 }
 
-- 
1.9.1