From: Brian Norris <computersforpeace@gmail.com>
To: <linux-mtd@lists.infradead.org>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>,
Brian Norris <computersforpeace@gmail.com>
Subject: [PATCH] mtd: nandsim: use nand_get_controller_data()
Date: Thu, 7 Jan 2016 11:06:46 -0800 [thread overview]
Message-ID: <1452193606-96031-1-git-send-email-computersforpeace@gmail.com> (raw)
Commit d699ed250c07 ("mtd: nand: make use of
nand_set/get_controller_data() helpers") overlooked some uses of
nand_chip::priv.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
drivers/mtd/nand/nandsim.c | 18 ++++++++++++------
1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index f57f461b5d72..1fd519503bb1 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -1908,7 +1908,8 @@ static void switch_state(struct nandsim *ns)
static u_char ns_nand_read_byte(struct mtd_info *mtd)
{
- struct nandsim *ns = mtd_to_nand(mtd)->priv;
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct nandsim *ns = nand_get_controller_data(chip);
u_char outb = 0x00;
/* Sanity and correctness checks */
@@ -1969,7 +1970,8 @@ static u_char ns_nand_read_byte(struct mtd_info *mtd)
static void ns_nand_write_byte(struct mtd_info *mtd, u_char byte)
{
- struct nandsim *ns = mtd_to_nand(mtd)->priv;
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct nandsim *ns = nand_get_controller_data(chip);
/* Sanity and correctness checks */
if (!ns->lines.ce) {
@@ -2123,7 +2125,8 @@ static void ns_nand_write_byte(struct mtd_info *mtd, u_char byte)
static void ns_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int bitmask)
{
- struct nandsim *ns = mtd_to_nand(mtd)->priv;
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct nandsim *ns = nand_get_controller_data(chip);
ns->lines.cle = bitmask & NAND_CLE ? 1 : 0;
ns->lines.ale = bitmask & NAND_ALE ? 1 : 0;
@@ -2150,7 +2153,8 @@ static uint16_t ns_nand_read_word(struct mtd_info *mtd)
static void ns_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
- struct nandsim *ns = mtd_to_nand(mtd)->priv;
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct nandsim *ns = nand_get_controller_data(chip);
/* Check that chip is expecting data input */
if (!(ns->state & STATE_DATAIN_MASK)) {
@@ -2177,7 +2181,8 @@ static void ns_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
static void ns_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
{
- struct nandsim *ns = mtd_to_nand(mtd)->priv;
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct nandsim *ns = nand_get_controller_data(chip);
/* Sanity and correctness checks */
if (!ns->lines.ce) {
@@ -2404,7 +2409,8 @@ module_init(ns_init_module);
*/
static void __exit ns_cleanup_module(void)
{
- struct nandsim *ns = mtd_to_nand(nsmtd)->priv;
+ struct nand_chip *chip = mtd_to_nand(nsmtd);
+ struct nandsim *ns = nand_get_controller_data(chip);
int i;
nandsim_debugfs_remove(ns);
--
2.6.0.rc2.230.g3dd15c0
next reply other threads:[~2016-01-07 19:07 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-07 19:06 Brian Norris [this message]
2016-01-07 19:36 ` [PATCH] mtd: nandsim: use nand_get_controller_data() Boris Brezillon
2016-01-07 20:27 ` Brian Norris
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1452193606-96031-1-git-send-email-computersforpeace@gmail.com \
--to=computersforpeace@gmail.com \
--cc=boris.brezillon@free-electrons.com \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.