All of lore.kernel.org
 help / color / mirror / Atom feed
From: libin.yang@linux.intel.com
To: alsa-devel@alsa-project.org, tiwai@suse.de
Cc: libin.yang@intel.com, mengdong.lin@intel.com,
	Libin Yang <libin.yang@linux.intel.com>
Subject: [PATCH] ALSA: hda - hdmi create spdif ctl based on pcm
Date: Thu, 14 Jan 2016 15:49:46 +0800	[thread overview]
Message-ID: <1452757786-103694-1-git-send-email-libin.yang@linux.intel.com> (raw)

From: Libin Yang <libin.yang@linux.intel.com>

SPDIF ctl should be based on pcm. Each spdif ctl controls
one pcm state.

This patch creates spdif based on pcm and no longer
based on pin.

Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
---
 sound/pci/hda/patch_hdmi.c | 27 ++++++++++++++++++---------
 1 file changed, 18 insertions(+), 9 deletions(-)

diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index dfb7c26..2f949fb 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -2255,6 +2255,7 @@ static int hdmi_pcm_close(struct hda_pcm_stream *hinfo,
 		hinfo->nid = 0;
 
 		mutex_lock(&spec->pcm_lock);
+		snd_hda_spdif_ctls_unassign(codec, pcm_idx);
 		clear_bit(pcm_idx, &spec->pcm_in_use);
 		pin_idx = hinfo_to_pin_index(codec, hinfo);
 		if (spec->dyn_pcm_assign && pin_idx < 0) {
@@ -2276,8 +2277,6 @@ static int hdmi_pcm_close(struct hda_pcm_stream *hinfo,
 					    pinctl & ~PIN_OUT);
 		}
 
-		snd_hda_spdif_ctls_unassign(codec, pcm_idx);
-
 		mutex_lock(&per_pin->lock);
 		per_pin->chmap_set = false;
 		memset(per_pin->chmap, 0, sizeof(per_pin->chmap));
@@ -2560,19 +2559,29 @@ static int generic_hdmi_build_controls(struct hda_codec *codec)
 		err = generic_hdmi_build_jack(codec, pcm_idx);
 		if (err < 0)
 			return err;
-	}
 
-	for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) {
-		struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx);
-
-		err = snd_hda_create_dig_out_ctls(codec,
+		/* create the spdif for each pcm
+		 * pin will be bound when monitor is connected
+		 */
+		if (spec->dyn_pcm_assign)
+			err = snd_hda_create_dig_out_ctls(codec,
+					  0, spec->cvt_nids[0],
+					  HDA_PCM_TYPE_HDMI);
+		else {
+			struct hdmi_spec_per_pin *per_pin =
+				get_pin(spec, pcm_idx);
+			err = snd_hda_create_dig_out_ctls(codec,
 						  per_pin->pin_nid,
 						  per_pin->mux_nids[0],
 						  HDA_PCM_TYPE_HDMI);
+		}
 		if (err < 0)
 			return err;
-		/* pin number is the same with pcm number so far */
-		snd_hda_spdif_ctls_unassign(codec, pin_idx);
+		snd_hda_spdif_ctls_unassign(codec, pcm_idx);
+	}
+
+	for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) {
+		struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx);
 
 		/* add control for ELD Bytes */
 		err = hdmi_create_eld_ctl(codec, pin_idx,
-- 
1.9.1

             reply	other threads:[~2016-01-14  7:53 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-14  7:49 libin.yang [this message]
2016-01-14  9:08 ` [PATCH] ALSA: hda - hdmi create spdif ctl based on pcm Takashi Iwai
2016-01-15  0:46   ` Yang, Libin
2016-01-15  5:51     ` Takashi Iwai
  -- strict thread matches above, loose matches on Subject: below --
2016-01-29  5:53 libin.yang
2016-01-29  5:59 ` Yang, Libin
2016-01-29  6:38   ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1452757786-103694-1-git-send-email-libin.yang@linux.intel.com \
    --to=libin.yang@linux.intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=libin.yang@intel.com \
    --cc=mengdong.lin@intel.com \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.